List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Development of GaN Substrates for High Power and Multi-Functional Devices

    SBC: KYMA TECHNOLOGIES, INC.            Topic: A09045

    Gallium nitride (GaN) substrates are a critical component in the roadmap of power efficient and high frequency electronic devices in the coming years. One major hurdle of this technology is the limited availability of large diameter, high quality substrates for large scale device fabrication. Under this effort, Kyma will work with partners to produce larger and more device consistent wafers for de ...

    SBIR Phase II 2012 Department of DefenseArmy
  2. Integrated Portable Power and Cooling System

    SBC: ENERGY QUEST TECHNOLOGIES INC            Topic: A09090

    The objective of this project is to build and deliver to the Army two prototype systems that will verify a reduction in fuel consumption by at least 30% and reduce weight by at least 30%, when compared to a currently fielded system. The design presented in this proposal is expected to reduce fuel consumption by over 40% and weight by 58%. These dramatic reductions are attributed to 3 system featur ...

    SBIR Phase II 2012 Department of DefenseArmy
  3. Multi-shot EOD Disrupter for Robotic Applications

    SBC: Vadum, Inc.            Topic: A10048

    The Vadum Multi-shot Robotic EOD Disrupter (MRED) system builds upon the known effectiveness and versatility of the 12-gauge SD-IED disrupter by adding systems to enable remote loading and firing of multiple shots from EOD robotic platforms. Multi-shot capability allows engagement of one or more targets with one or more different user-selectable shot types, without driving the robot back and forth ...

    SBIR Phase II 2012 Department of DefenseArmy
  4. High Temperature Silicon Carbide (SiC) Gate Driver

    SBC: Arkansas Power Electronics International, Inc.            Topic: A10132

    APEI, Inc."s Phase II goal is to develop, fabricate and test a compact, high temperature, high performance isolated gate drivers utilizing HTSOI integrated circuits, discrete SiC devices, and high frequency coreless magnetics. Additionally, leveraging its existing high performance high temperature SiC power modules, APEI, Inc. will integrate the developed gate driver into this SiC power module and ...

    SBIR Phase II 2012 Department of DefenseArmy
  5. Topical Nitric Oxide for the Treatment of Acute Military Wound Infections

    SBC: Novan, Inc.            Topic: A10160

    Under battlefield conditions, warfighters face a wide range of cutaneous injuries, many of which are susceptible to life- and limb-threatening infections caused by multi-drug resistant bacteria. Nitric oxide is a powerful, broad spectrum antimicrobial agent that is naturally produced by the immune system. Nitric oxide"s ability to attack multiple cellular targets limits the chance for bacteria t ...

    SBIR Phase II 2012 Department of DefenseArmy
  6. Zero Power/Ultra Low Power Tamper Detection Sensors

    SBC: Starfire Industries LLC            Topic: OSD10A09

    This SBIR project will fabricate and characterize no-power sensors to enable self-protection mechanisms to prevent an adversary from accessing or reverse-engineering sensitive military electronics containing critical program information (CPI). Due to the wide number of threat channels and intrusion modalities, innovative approaches on anti-tamper (AT) sensor technology are needed to counter a cap ...

    SBIR Phase II 2012 Department of DefenseArmy
  7. In-Vacuo Passivation of High Aspect Ratio HgCdTe Surfaces

    SBC: EPIR TECHNOLOGIES INC            Topic: A10018

    The overall goal of this project is to develop a 100 degrees C temperature ALD CdTe passivation process capable of conformally passivating high aspect ratio surfaces of HgCdTe infrared detectors. The effort is comprised of first establishing the low temperature ALD process, next in fully characterizing the resulting CdTe, then implementing in-situ sample surface preparation, and finally in passi ...

    SBIR Phase II 2012 Department of DefenseArmy
  8. The Behavior within Minimum Signature Propellants during Impact IM Tests

    SBC: Corvid Technologies LLC            Topic: A09128

    The primary objective of this effort is to further develop and validate a computational capability which can be used to assess propulsion systems for compliance with insensitive munitions (IM) requirements. Comprehensive testing to ascertain IM compliance for such systems is time consuming and expensive, but necessitated by safety, transportation, and deployment concerns. Sub-scale testing require ...

    SBIR Phase II 2012 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government