You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Nanoadsorbent and Microwave Technology to Capture and Recover Organic Vapors

    SBC: ADS Technoogies, Inc.            Topic: N/A

    Emissions of volatile organic compounds (VOCs) and hazardous air polutants (HAPS are a serioud environmental issue. These pollutants are requlated to protect human health and encourage the development of better control technologies. Current technologies to control thses emissions, until better materials are developed, include destructive and/or recovery-based technologies. Implementation of ads ...

    SBIR Phase I 2005 Environmental Protection Agency
  2. Barium Titanate Formation for Electronic/Photonic Applications

    SBC: INTEGRAL WAVE TECHNOLOGIES            Topic: MDA01014

    Integral Wave Technologies (for known as Arkansas Microelectronic Development Corporation) is developing a process for growing ferroelectric, polycrystalline barium titanate (BaTiO3) thin-films, by anodic oxidation of co-evaporated barium-titanium films (BaTi). Though films of this nature find applications in several electrical devices, Integral Wave will utilize this novel method of ferroelectri ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  3. Multifunctional Protective Coatings for Spacecraft Surfaces

    SBC: APPLIED MATERIAL SYSTEMS ENGINEERING, INC.            Topic: MDA05T019

    The purpose of this STTR phase I proposal is to demonstrate the feasibility of producing the survivable multi-functional engineered material systems for spacecraft surfaces at an affordable cost using the proposed novel material designs and processes. The objectives of these efforts are not only to demonstrate the technical feasibility, but also to illustrate that at least 50% cost savings for DOD ...

    STTR Phase I 2005 Department of DefenseMissile Defense Agency
  4. Micro-discharge Based Multi-Metal Emissions Monitoring System

    SBC: Cavition, Inc.            Topic: N/A

    Caviton has developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can b detected and the focus of this Phase II project is to develop a sampling system, carry out laboratory tests, then move to field tests of sampling and analysis. Finall ...

    SBIR Phase II 2005 Environmental Protection Agency
  5. Large Format LADAR Receiver Arrays Based on Near Infrared HgCdTe Avalanche Photodiodes

    SBC: EPIR TECHNOLOGIES INC            Topic: MDA04118

    Most seeker systems usually operate at long distances. The return laser signal from the target is not only attenuated by absorption, reflection and scattering by air-borne gas, dust and liquid particles, but also by the emissivity and reflectivity variations of the target surface. High bandwidth detectors with internal gain are required. Avalanche photodetectors (APDs) are best suited for this pur ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  6. Innovative Manufacturing Processes

    SBC: INVENTEK CORP            Topic: MDA02021

    Application of a unique separator material, ceramic fiber separator (CFS), developed by Inventek, can serve as the foundation for advanced thermal batteries to triple EKV battery capacity at high power. A new rapid method of thin-cell production would use the fiber separator CFS as a carrier for tapecast cell assembly and reduce unit cost by 25%. In this method, a tunnel kiln process can produce ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  7. A Nanocrystal Biosensor Array for Simultaneous Detection of Multiple Waterborne Pathogens

    SBC: NANOMATERIALS AND NANOFABRICATION LABORATORIES            Topic: N/A

    This Small Business Innovations Research Phase I project is to develop a new generation of sensitive, rapid, portable, robust and inexpensive biosensor for simultaneous detection of multipe watergorne pathogens in water products and environment. Specificaly, NN-labs team will develop new biomarkers by conjugating the various color nanocrystals onto the monoclonal antibodies, and a new flow cell t ...

    SBIR Phase I 2005 Environmental Protection Agency
  8. Biomimetic Nanostructured Coating for Dry Machining

    SBC: NanoMech, Inc.            Topic: N/A

    This Phase II proposes to develop an innovative nanostructured coating, with a unique integration of hard phases and lubrication phases, for dry machining of austenite steels for the automotive and aerospace industries. This novel coating will be synthesized using a combination of electrostatic spray coating (ESC), chemical vapor infiltration (CVI), and plasma etching. W unique biomimetic inspir ...

    SBIR Phase II 2005 Environmental Protection Agency
  9. ABL Smart Piping System for Containment and Control of Highly Corrosive and Hazardous Chemicals

    SBC: Odyssian Technology, L.L.C.            Topic: MDA03030

    During this program, multifunctional (smart) piping system technology will be developed for used on the Airborne Laser (ABL). This system, which was demonstrated in phase I, has a multifunctional design with integrated containment and leak detection functionality. The smart piping system design uses lightweight materials in conjunction with integrated sensors to achieve an advanced lightweight pi ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  10. Improved Reliability and Producibility of Ballistic Missile Defense Systems through Highly Controlled Deposition of Critical Battery Components

    SBC: Odyssian Technology, L.L.C.            Topic: MDA04113

    The missiles used by the military today are electronic intensive: control systems, navigation systems, and targeting systems all have components on-board the missile. These systems require a power source that is capable of delivering large amounts of power throughout flight of the missile. The power source must be capable of being stored for decades without loss of power or performance while bei ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government