You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Reactive Scrubbing for Mercury Removal and Stabilization

    SBC: ADA Technologies, Inc.            Topic: N/A

    The release of mercury into the environment via combustion processes has become an issue of concern for the US and the entire world. Major sources either are regulated or are under review to develop regulations to reduce emissions. ADA Technologies has successfully demonstrated the performance of a novel reactive scrubbing technology for the removal of vapor-phase mercury from incinerator exhaus ...

    SBIR Phase II 2005 Environmental Protection Agency
  2. Nanoadsorbent and Microwave Technology to Capture and Recover Organic Vapors

    SBC: ADS Technoogies, Inc.            Topic: N/A

    Emissions of volatile organic compounds (VOCs) and hazardous air polutants (HAPS are a serioud environmental issue. These pollutants are requlated to protect human health and encourage the development of better control technologies. Current technologies to control thses emissions, until better materials are developed, include destructive and/or recovery-based technologies. Implementation of ads ...

    SBIR Phase I 2005 Environmental Protection Agency
  3. Micro-discharge Based Multi-Metal Emissions Monitoring System

    SBC: Cavition, Inc.            Topic: N/A

    Caviton has developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can b detected and the focus of this Phase II project is to develop a sampling system, carry out laboratory tests, then move to field tests of sampling and analysis. Finall ...

    SBIR Phase II 2005 Environmental Protection Agency
  4. Singlet Delta Oxygen Airflow Sterilization for Building Protection


    Direct Energy Solutons proposes to deliver a prototype air flow decontaminaton device design for building protection from chemical and bilogical attacks. The decontamination device generates singlet delta oxygen (SDO) on a photocatalyst bed for the destruction of contaminants entrained in an airflow. This HVAC-compatible, minimum pressure drop chem-bio decontaminaton system will: Use a proven n ...

    SBIR Phase I 2005 Environmental Protection Agency
  5. Biosensor for Field Monitoring of Pesticides in Water


    This SBIR proposal describes development of a protable, low-power amperometric biosensor to detect ogranophosphorus and carbamate insecticides in water. A renewable, robust biosensor is proposed and will be designed to specifically detect insecticides based on an immobilized enzyme of a sensor electrode. This method will allow analysis of insecticides in water without significant dilluton or red ...

    SBIR Phase I 2005 Environmental Protection Agency
  6. Exploring the Feasibility of Scaing Up an Enviornmentally Safe Bright Chrome Application Method

    SBC: IonEdge Corp.            Topic: N/A

    IonEdge Corporation has developed and envionrmentally safe bright chrome application for the automatove industry. The application method does not use liquid chemicals, eliminates hexavalent chromium, reduces number of procedss steps and simplifies operatinb procedures. The process has the potentail to reduce manufacturing cost substantially. However, in order to realize these cost benefits, tec ...

    SBIR Phase I 2005 Environmental Protection Agency
  7. Environmentally Safe, Economical Bright Chrome Application Technology for the Automotive Industry

    SBC: IonEdge Corp.            Topic: N/A

    Ion Edge has been in the business of developing and commercializing environmentally safe metal coating methods and equipment for several years. Recently, the company has developed a decorative bright chrome finish with acceptable appeal and promising qualities desired in the automotive sector. This application technology does not use liquid chemicals, eliminates hexavalent chromium, reduces numb ...

    SBIR Phase I 2005 Environmental Protection Agency
  8. Water Security Sensor for Automatic Masurement of Micrograms of Heavy Metals in Dinking and Waste Water

    SBC: ITN ENERGY SYSTEMS, INC.            Topic: N/A

    There is growing concern regarding the susceptibility of the US water system to terrorist attack. This concern stems both from recent attacks against targent in the US, and from the inherent characteristics of the US water supply systems, which are spatially diverse, subjet to intrusion and contain many components. An important aspect of risk mitigation is implementation of smart early-warning s ...

    SBIR Phase I 2005 Environmental Protection Agency
  9. A Nanocrystal Biosensor Array for Simultaneous Detection of Multiple Waterborne Pathogens


    This Small Business Innovations Research Phase I project is to develop a new generation of sensitive, rapid, portable, robust and inexpensive biosensor for simultaneous detection of multipe watergorne pathogens in water products and environment. Specificaly, NN-labs team will develop new biomarkers by conjugating the various color nanocrystals onto the monoclonal antibodies, and a new flow cell t ...

    SBIR Phase I 2005 Environmental Protection Agency
  10. Biomimetic Nanostructured Coating for Dry Machining

    SBC: NanoMech, Inc.            Topic: N/A

    This Phase II proposes to develop an innovative nanostructured coating, with a unique integration of hard phases and lubrication phases, for dry machining of austenite steels for the automotive and aerospace industries. This novel coating will be synthesized using a combination of electrostatic spray coating (ESC), chemical vapor infiltration (CVI), and plasma etching. W unique biomimetic inspir ...

    SBIR Phase II 2005 Environmental Protection Agency
US Flag An Official Website of the United States Government