You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Nanoadsorbent and Microwave Technology to Capture and Recover Organic Vapors

    SBC: ADS Technoogies, Inc.            Topic: N/A

    Emissions of volatile organic compounds (VOCs) and hazardous air polutants (HAPS are a serioud environmental issue. These pollutants are requlated to protect human health and encourage the development of better control technologies. Current technologies to control thses emissions, until better materials are developed, include destructive and/or recovery-based technologies. Implementation of ads ...

    SBIR Phase I 2005 Environmental Protection Agency
  2. Simulation of Stressing Optical Clutter for Scene Generation

    SBC: ATMOSPHERIC & ENVIRONMENTAL RESEARCH, INC.            Topic: MDA04154

    This effort will characterize the spatial structure and real world features of stressing atmospheric phenomena and develop techniques to efficiently represent these phenomena in optical/infrared background models. Our approach to this problem involves locating and identifying stressing backgrounds contained in measurements and extracting key clutter characteristics in a form that allows t ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  3. Demonstration of a Continuous, Real-Time PM2.5 Chemical Speciation Monitor Based on an Aerosol Mas Spectrometer

    SBC: AERODYNE RESEARCH INC            Topic: N/A

    This Small Business Innovation Research Phase II project addresses the need for improved monitoring technologies for continuous particulate mass and chemical speciation of ambient aerosols. Aerodyne Research, Inc. will develop a prototype Aerosol Chemical Speciation Monitor (ACMS) that measures ambient aerosol mass and chemical composition of non-refractory submicron aerosol particles in real-tim ...

    SBIR Phase II 2005 Environmental Protection Agency
  4. Photonic T/R Module

    SBC: AGILTRON, INC.            Topic: MDA04182

    Leveraging on Agiltron's recent breakthrough in manufacturing low cost fiber optic digital delay lines and the drastic improvement in cost and performance of commercial optical transceivers, we propose to develop a practical fiber optic variable time delay based T/R integration module for microwave coherent distributed aperture and space-time coded phased array radars. The proposed approach overco ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  5. Barium Titanate Formation for Electronic/Photonic Applications

    SBC: INTEGRAL WAVE TECHNOLOGIES            Topic: MDA01014

    Integral Wave Technologies (for known as Arkansas Microelectronic Development Corporation) is developing a process for growing ferroelectric, polycrystalline barium titanate (BaTiO3) thin-films, by anodic oxidation of co-evaporated barium-titanium films (BaTi). Though films of this nature find applications in several electrical devices, Integral Wave will utilize this novel method of ferroelectri ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  6. Multifunctional Protective Coatings for Spacecraft Surfaces

    SBC: APPLIED MATERIAL SYSTEMS ENGINEERING, INC.            Topic: MDA05T019

    The purpose of this STTR phase I proposal is to demonstrate the feasibility of producing the survivable multi-functional engineered material systems for spacecraft surfaces at an affordable cost using the proposed novel material designs and processes. The objectives of these efforts are not only to demonstrate the technical feasibility, but also to illustrate that at least 50% cost savings for DOD ...

    STTR Phase I 2005 Department of DefenseMissile Defense Agency
  7. Low Cost, Wide Band Infrared Window Technologies

    SBC: Aspen Systems, Inc.            Topic: MDA04114

    Aspen Systems Inc., proposes to investigate the feasibility of developing a protective coating material for ZnS that will have comparable mechanical properties of ALON, Spinel and Sapphire but will retain the extended regime transmission properties of multi-spectral ZnS. However, ZnS being a soft material with relatively poor mechanical strength and erosion resistance, it is essential to develop a ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  8. Simple Colloid Thruster for Generating Precise Impulse Thrust

    SBC: BUSEK CO., INC.            Topic: MDA04019

    For the Phase I effort, Busek developed a simple, integrated colloid thruster prototype capable of producing thrust of 100 µN at reasonable operating conditions. A unique geometry was chosen from several electrospraying sources tested. This thrust was conservatively estimated from measured beam current, accelerating voltage and could be significantly higher. As this was achieved from an area o ...

    SBIR Phase II 2005 Department of DefenseMissile Defense Agency
  9. New Bonding Process for Joining High Tenacity Fabrics in Airships

    SBC: Cape Cod Research            Topic: MDA04161

    A new generation of high altitude airships (HAA) requires advanced materials and fabrication methods to achieve the weight, strength and durability requirement for long-term deployment. A new fabric joining approach is proposed to form strong, durable seams between textile components without incurring a large weight penalty. The new textile adhesive and application system are designed to perform ...

    SBIR Phase I 2005 Department of DefenseMissile Defense Agency
  10. Micro-discharge Based Multi-Metal Emissions Monitoring System

    SBC: Cavition, Inc.            Topic: N/A

    Caviton has developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can b detected and the focus of this Phase II project is to develop a sampling system, carry out laboratory tests, then move to field tests of sampling and analysis. Finall ...

    SBIR Phase II 2005 Environmental Protection Agency
US Flag An Official Website of the United States Government