You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Nanoadsorbent and Microwave Technology to Capture and Recover Organic Vapors

    SBC: ADS Technoogies, Inc.            Topic: N/A

    Emissions of volatile organic compounds (VOCs) and hazardous air polutants (HAPS are a serioud environmental issue. These pollutants are requlated to protect human health and encourage the development of better control technologies. Current technologies to control thses emissions, until better materials are developed, include destructive and/or recovery-based technologies. Implementation of ads ...

    SBIR Phase I 2005 Environmental Protection Agency
  2. Micro-discharge Based Multi-Metal Emissions Monitoring System

    SBC: Cavition, Inc.            Topic: N/A

    Caviton has developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can b detected and the focus of this Phase II project is to develop a sampling system, carry out laboratory tests, then move to field tests of sampling and analysis. Finall ...

    SBIR Phase II 2005 Environmental Protection Agency
  3. Novel Metal Shaping Process Using Non-Toxic Working Fluids

    SBC: Faraday Technology, Inc.            Topic: N/A

    This SBIR proposal addresses worker and environmental safety concerns regarding the use of toxic cutting fluids in metal shaping operations. The toxicity of cutting fluids cn be caused by either the constituents fo the cutting fluid chemistyr or in the case of water-soluble emulsions, the toxicity can be caused by biocides intended to control baterial growth. This proposal seeks to adapt an adve ...

    SBIR Phase I 2005 Environmental Protection Agency
  4. Isocyanate-Free Solvent-Free Hybrid Resin System

    SBC: DR. BEN CURATOLO, INC.            Topic: N/A

    This Small Business Innovations Research Phase I project is designed to determine the feasibility of preparing an environmentally friendly isocyanate-free solvent-free hybrid resin system ssuitable fo industrial applications such as automobile refinishing and floor coatings. In particular, the overall objective of this program is to determine the most approptiate ratios or reactive groups of UV c ...

    SBIR Phase I 2005 Environmental Protection Agency
  5. A Nanocrystal Biosensor Array for Simultaneous Detection of Multiple Waterborne Pathogens

    SBC: NANOMATERIALS AND NANOFABRICATION LABORATORIES            Topic: N/A

    This Small Business Innovations Research Phase I project is to develop a new generation of sensitive, rapid, portable, robust and inexpensive biosensor for simultaneous detection of multipe watergorne pathogens in water products and environment. Specificaly, NN-labs team will develop new biomarkers by conjugating the various color nanocrystals onto the monoclonal antibodies, and a new flow cell t ...

    SBIR Phase I 2005 Environmental Protection Agency
  6. Biomimetic Nanostructured Coating for Dry Machining

    SBC: NanoMech, Inc.            Topic: N/A

    This Phase II proposes to develop an innovative nanostructured coating, with a unique integration of hard phases and lubrication phases, for dry machining of austenite steels for the automotive and aerospace industries. This novel coating will be synthesized using a combination of electrostatic spray coating (ESC), chemical vapor infiltration (CVI), and plasma etching. W unique biomimetic inspir ...

    SBIR Phase II 2005 Environmental Protection Agency
  7. Etchant Recovery System

    SBC: Republic Anode Fabricators, Inc.            Topic: N/A

    Cupric chloride and ammoniacla etchants are used to remove unwanted copper form printed circuit boards. They are used in a continuous"bleed and feed" mode, which leads to the formation of a hazardous copper containing waste. This waste material must be hauled form the site for disposal. In addition, cupric hcloride etchant requires the use of hazardous oxidants such as chlorine gas or sodium ch ...

    SBIR Phase I 2005 Environmental Protection Agency
  8. A Hybrid Pathogen Detection System

    SBC: VEGRANDIS, LLC            Topic: N/A

    Cryptosporidium parvum, a protozoan parasite that invades the gastrointestial system, is a serious threat to the nation's water supply. Assays for pathogen using self-contained microelectrochemical detection are desirable because precise detection can be performed with simple instrumentation on colored and turbid samples minimizing pre-treatment procedures. In addition, electrochemical detection ...

    SBIR Phase I 2005 Environmental Protection Agency
  9. Novel Metal Shaping Process Using Non-Toxic Working Fluids

    SBC: Faraday Technology, Inc.            Topic: 04NCERA2

    This research project addresses worker and environmental safety concerns regarding the use of toxic cutting fluids in metal shaping operations. The toxicity of cutting fluids can be caused by either the constituents of the cutting fluid chemistry, or in the case of water-soluble emulsions, the biocides intended to control bacterial growth. Faraday Technology, Inc., intends to adapt an advanced ele ...

    SBIR Phase I 2005 Environmental Protection Agency
  10. A Hybrid Pathogen Detection System

    SBC: VEGRANDIS, LLC            Topic: 04NCERC1

    Cryptosporidium parvum, a protozoan parasite that invades the gastrointestinal system, is a serious threat to the Nation's water supply. Assays for pathogen using self-contained microelectrochemical detection are desirable because precise detection can be performed with simple instrumentation on colored and turbid samples, minimizing pretreatment procedures. In addition, electrochemical detectio ...

    SBIR Phase I 2005 Environmental Protection Agency
US Flag An Official Website of the United States Government