You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Nano-Enhanced Composite Electrodes for Electrostatic Precipitators

    SBC: Applied Sciences Inc.            Topic: TopicF

    With the increasing volatility of petroleum and natural gas resources, small coal-fired boilers have become increasingly more attractive for steam and power generation in several industries. This switch to small-scale, coal-fired plants is expected to continue, and increases the need for clean coal utilization technology. The U.S. Energy Policy Act includes support for a clean coal technology init ...

    SBIR Phase II 2010 Environmental Protection Agency
  2. Nanoporous Metal Organic Framework Filters for Removal of Gaseous Pollutants

    SBC: Cbana Laboratories            Topic: TopicC

    The objective of this project is to evaluate the feasibility of using some newly discovered materials, water-stable metal-organic frameworks (MOF), as filters for pollutants common in indoor air. By way of background, recent Defense Advanced Research Projects Agency (DARPA)-supported work from Professor Masel’s laboratory has shown that a new class of water-stable MOFs shows unprecedented adsorp ...

    SBIR Phase I 2010 Environmental Protection Agency
  3. Performance and Design Development for Compost technology used in Green Infrastructure, Green Building, and Urban Storm Water Applications

    SBC: Filtrexx International, LLC            Topic: TopicA

    Green builders and designers, urban planners, engineers and architects, and watershed manager working with green infrastructure, low impact development (LID), storm water management, water quality improvement, total maximum daily load (TMDL) designated stream segments, and carbon footprint reduction programs need more high performance, cost-effective, green technologies to design and implement in ...

    SBIR Phase I 2010 Environmental Protection Agency
  4. Pigmented Solvent-Free Corrosion-Resistant UV Coating System

    SBC: DR BEN CURATOLO INC            Topic: TopicB

    This SBIR Phase I project is designed to determine the feasibility of preparing novel coatings for corrosion resistance through the incorporation of pigment and non-chrome corrosion inhibitor into a solvent-free ultraviolet (UV) light curable matrix. In particular, the proposed research is directed toward determining the feasibility of preparing a safe, novel chromium-free, solvent-free, corrosion ...

    SBIR Phase I 2010 Environmental Protection Agency
  5. Chromium-Free Corrosion-Resistant Hybrid UV Coatings

    SBC: DR BEN CURATOLO INC            Topic: TopicA

    This SBIR Phase II project is designed to develop and optimize a prototype environmentally friendly, chromium-free, corrosion-resistant, hybrid ultraviolet (UV) coating system with demonstrated properties suitable for industrial, automotive, and aerospace corrosion protection. The objectives of this Phase II project include the optimization of individual formulation components in the development o ...

    SBIR Phase II 2010 Environmental Protection Agency
  6. Nanoadsorbent and Microwave Technology to Capture and Recover Organic Vapors

    SBC: ADS Technoogies, Inc.            Topic: N/A

    Emissions of volatile organic compounds (VOCs) and hazardous air polutants (HAPS are a serioud environmental issue. These pollutants are requlated to protect human health and encourage the development of better control technologies. Current technologies to control thses emissions, until better materials are developed, include destructive and/or recovery-based technologies. Implementation of ads ...

    SBIR Phase I 2005 Environmental Protection Agency
  7. Enabling Electrostatic Painting of Automotive Polymers with Low Cost Carbon Nanofibers

    SBC: Applied Sciences Inc.            Topic: N/A

    Polymer composites are widely used for automotive body panels to save weight, increase fuel efficiency, and eliminate corrosion. However, unlike metals, structural polymers are not electrically conductive; thus, they are not amenable to the industry standard technique of electrostatic spray painting (ESP). Current methods for adapting polymers to ESP pose serious environmental and economic chall ...

    SBIR Phase I 2006 Environmental Protection Agency
  8. Nano-Enhanced Composite Electrodes for Electrostatic Precipitators

    SBC: Applied Sciences Inc.            Topic: N/A

    Electrostatic precipitators (ESPs) are a key pollution control device in air pollution control devices for small oil and coal-fired industrial boilers. ESPs can operate with an efficiency of 98 to 99% for the removal of mercury and fly ash from the flue gas stream. With an electrostatic precipitator fly ash particles are charged electrically as the flue gas passes through the precipitator allowi ...

    SBIR Phase I 2009 Environmental Protection Agency
  9. Enabling Electrostatic Painting of Automotive Polymers with Low Cost Carbon Nanofibers

    SBC: Applied Sciences Inc.            Topic: N/A

    Applied Sciences, Inc. (ASI) investigated the use on inexpensive carbon nanofiber (CNF) to impart electrical conductivity to polymer systems to allow the use of electrostatic painting (ESP) techniques to paint these polymers in the same manner as metals without the need for a solvent- based primer coat. The production of polymer composites that can be electrostatically painted with no additional ...

    SBIR Phase II 2007 Environmental Protection Agency
  10. The Use of Recycled Solid Automotive Paint Wastes as Ingredients in Automotive Sealant Products

    SBC: Aster Inc.            Topic: N/A

    About 75,000,000 lbs of paint sludge is generated by the U.S. automotive industry each year. This type of waste and (similar streams from other industries) make significant contributions to landfills. The solution proposed by ASTER, Inc., proven feasible during the Phase I of this work, is to recycle the paint sludge into ingredients for automotive sealants. This new approach results in waste g ...

    SBIR Phase II 1995 Environmental Protection Agency
US Flag An Official Website of the United States Government