You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPs

    SBC: Distant Focus Corporation            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  2. Isocyanate-Free Solvent-Free Hybrid Resin System

    SBC: DR. BEN CURATOLO, INC.            Topic: N/A

    This Small Business Innovation Research Phase II project is designed to develop and optimize a prototype environmentally friendly isocyanate-free solvent-free UV curable hybrid resin system demonstrated in EPA SBIR Phase I research to have properties suitable for commercial industrial applications such as automobile refinishing, floor coatings, and aircraft coatings. Properties of the proprietary ...

    SBIR Phase II 2006 Environmental Protection Agency
  3. In-Field Device for the Autonomous Detection of Harmful Algal Bloom Toxigenic Species and Toxins

    SBC: Lynntech Inc.            Topic: 833

    Harmful algal blooms (HABs) are a serious threat to coastal resources, causing impacts ranging from the contamination of seafood products with potent toxins to mortalities of wild and farmed fish and other marine animals. HABs cost the U.S. economy over $50 million annually due to the closure of fisheries and beaches and the treatment of human illness from toxin exposures. NOAA is interested in ...

    SBIR Phase II 2006 Department of Commerce
  4. Environmentally-Friendly Anti-Fouling Coverglass for Bio-Optical Sensors and Solar Panels

    SBC: NANOHMICS INC            Topic: 845

    During a successful Phase I feasibility study, Nanohmics¿ scientists were able to incorporate environmentally-friendly algaecides into hard, optical quality polymers for use as coverglass materials. These transparent coverglass materials stopped all marine algae growth on the glass for well over a month. The Phase II development will further this research by incorporating natural product and/or ...

    SBIR Phase II 2006 Department of Commerce
  5. FEASIBILITY OF AN INTEGRATED CONTINUOUS PROCESS USING AUTO- MATIC INSTRUMENTATION AND STATAISTICAL ANALYSES TO REDUCE COSTS AND TO INCREASE THE EFFICIENCY OF PEAK DETECTION AND POLLUTION CONTROL IN UNDERGROUND STORAGE TANKS

    SBC: Production Monitoring &            Topic: N/A

    OVER THE LAST SEVERAL YEARS, THE EPA HAS DEVOTED MAJOR EF- FORTS TO IDENTIFY AND DOCUMENT THE MAGNITUDE OF THE RISKS OFENVIRONMENTAL POLLUTION DUE TO LEAKING UDERGROUND STORAGE TANKS (UST). IN APRIL 1987, THE EPA PUBLISHED THE PROPOSED REGULATIONS FOR THE OWNERS AND OPERATORS OF UST, WHICH ARE EXPECTED TO BE FINALIZEDD IN EARLY 1988. THESE REGULATIONS INCLUDE REQUIREMENTS FOR TANK TIGHTNESS TESTS, ...

    SBIR Phase II 1989 Environmental Protection Agency
  6. Etchant Recovery System

    SBC: Republic Anode Fabricators, Inc.            Topic: N/A

    Cupric chloride etchant is in wide use in the etching of copper, particularly in the manufacture of printed circuit boards. Currently, hazardous oxidants such as chlorine are used to regenerate this etchant. In addition, the hazardous waste generated must be hauled away and disposed of. The device under development will electrolytically regenerate the etchant without the addition of oxidizing c ...

    SBIR Phase II 2006 Environmental Protection Agency
  7. Distributed Automatic Reconfigurable Transponder (DART)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Williams-Pyro, Inc. (WPI) has designed and successfully demonstrated a proof-of-concept of the Distributed Automatic Reconfigurable Transponder (DART) that will be capable of achieving distributed multi-nodal voice/data communication for fire fighters. In Phase 2 we will focus on developing a fully functional system that reduces communication failure while maintaining a robust and flexible system. ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  8. AUTOMATIC PRIME SOUNDING SELECTION RESEARCH

    SBC: Zycor Inc.            Topic: N/A

    MANUAL SELECTION OF PRIME SOUNDINGS FOR DISPLAY ON A NAUTICAL CHART IS TIME CONSUMING AND EXPENSIVE. THE COMPUTER PROGRAM AVAILABLE TO NOAA WHICH PERFORMS PRIME SOUNDING SELECTION USES OUTDATED SOFTWARE TECHNOLOGY. THIS RESEARCH EFFORT WILL INVESTIGATE THE FEASIBILITY OF AUTOMATING PRIME SOUNDING SELECTION WITH A NEW ALGORITHM WHICH USES OF STATE-OF-THE-ART SURFACE MODELING TECHNIQUES. THE SURFACE ...

    SBIR Phase II 1989 Department of Commerce
  9. Isocyanate-Free Solvent-Free Hybrid Resin System

    SBC: DR. BEN CURATOLO, INC.            Topic: 05NCERP1

    The objective of this Phase II research project is to develop and optimize the prototype environmentally friendly, isocyanate-free, solvent-free, ultraviolet (UV) curable hybrid resin system demonstrated in Phase I. In Phase II, Light Curable Coatings will develop a system with properties suitable for commercial industrial applications, such as automobile refinishing, floor coatings, and aircraft ...

    SBIR Phase II 2006 Environmental Protection Agency
  10. Etchant Recovery System

    SBC: Republic Anode Fabricators, Inc.            Topic: 05NCERP1

    Cupric chloride etchant is widely used in the etching of copper, particularly in the manufacture of printed circuit boards. Currently, hazardous oxidants such as chlorine are used to regenerate this etchant. In addition, the hazardous waste generated must be hauled away for disposal. In Phase II, Republic Anode Fabricators, Inc., will develop a device that will electrolytically regenerate the ...

    SBIR Phase II 2006 Environmental Protection Agency
US Flag An Official Website of the United States Government