You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. SAFE AND ECONOMICAL CHLORINE DIOXIDE GENERATION

    SBC: Eltech Research Corpon            Topic: N/A

    SAFE, COST EFFECTIVE ALTERNATIVES TO CHLORINE TREATMENT OF DRINKING WATER FOR DISTRIBUTION AND DISINFECTION HAVE BEEN SOUGHT FOR SOME TIME. CHLORINE DIOXIDE IS A VIABLE ALTERNATIVE TO CHLORINE FOR THE TREATMENT OF EVEN POOR QUALITY WATER SUPPLIES AND THE REDUCTION OF POTENTIAL CANCER CAUSING CHLORINATED ORGANICS. ITS WIDESPREAD USE HAS BEEN INHIBITED BY THE COSTS AND/OR COMPLEXITY OF ITS PRODUCTIO ...

    SBIR Phase I 1989 Environmental Protection Agency
  2. DOUBLE HEAT EXCHANGES SYSTEM FOR MINIMIZING ENERGY AND POLLUTION CONTROL COSTS IN INDUSTRIAL PROCESSES

    SBC: Energy Innovations, Inc.            Topic: N/A

    THERE ARE NUMEROUS INDUSTRIAL PROCESSES REQUIRING THAT MATERIAL BE HEATED AND THEN SUBSEQUENTLY COOLED. IF MOST OF THIS HEAT IS RECOVERED AND RECYCLED TO THE OVEN, THE NET POWER INPUT TO THE OVEN COULD BE SUBSTANTIALLY REDUCED. THE KEY TO ACCOMPLISHING THIS IS AN INCREASE OF THE HEAT TRANSFER COEFFICIENT BETWEEN GAS AND MATERIAL SO THAT THE HEAT EXCHANGERS ARE RESASONABLY COMPACT. SIMPLE EXPERIMEN ...

    SBIR Phase I 1989 Environmental Protection Agency
  3. Wavelength Dispersive Fluorescence Detectors in Soft X-ray Region

    SBC: HD TECHNOLOGIES, INC.            Topic: N/A

    A wavelength dispersive x-ray fluorescence detector working in soft x-ray region has been proposed based on the diffraction principles. The detector uses graded multilayers as analyzers and large area detectors for data collection to achieve good energy resolution and to avoid count rate problems encountered by solid state detectors. Furthermore, the detector will be tunable in a wide energy regio ...

    SBIR Phase II 2002 Department of Commerce
  4. On-Wafer Measurement System for Combinatiorial Magnetic Thin Film Libraries

    SBC: Industrial Measurement Systems, Inc.            Topic: N/A

    As magnetic thin-film systems became part of complex industrial applications, their composition increasingly became more complicated. A means is needed to efficiently develop and systematically characterized magnetic, electronic, and mechanical properties of advanced thin-film systems. New metrological systems are required that are capable of making on-wafer measurements on large number of sites o ...

    SBIR Phase I 2002 Department of Commerce
  5. Advanced Tools for Process Specification Language

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: N/A

    We propose to develop a robust PSL syntax based on XML and RDF that will further its role as an interlingua among various process modeling languages. In addition, we will develop the next-generation translator-generator system based on this format to automate the software development process of process-centric translation across applications and formats. One of today's greatest challenges to succe ...

    SBIR Phase I 2002 Department of Commerce
  6. A High-Spatial Resolution, High-Sensitivity, Rapid OSL Dosimetry System For Brachytherapy

    SBC: Landauer, Inc            Topic: N/A

    This project seeks proof-of-concept and prototype demonstration of a high-spatial resolution, high-sensitivity, rapid in-vitro dosimeter system for calibration and dose measurements of brachytherapy radiation sources. The present innovation utilizes the high sensitivity of Pulsed Optically Stimulated Luminescence (POSL) from Al2O3:C proprietary luminescence materials, coupled to a fiber optic deli ...

    SBIR Phase I 2002 Department of Commerce
  7. A Universal Technique for Antimicrobial Surface Preparation Using Quaternary Ammonium-Functionalized Dendrimers

    SBC: Lynntech Inc.            Topic: N/A

    A novel, environmentally benign antimicrobial surface modification based on immobilized quaternary ammonium-functionalized dendrimers is proposed for the prevention of biofilm formation. Dendrimers are unique nanomaterials that have attracted attention as possible antimicrobial agents due to their compact structure, high local charge density of functional surface groups, unique carrier properties, ...

    SBIR Phase I 2002 Environmental Protection Agency
  8. Novel Method for Ferrate Production

    SBC: Lynntech Inc.            Topic: N/A

    New environmental regulations have identified many of the currently used oxidizing agents employed for industrial waste control, disinfection, and wastewater treatment as a caveat that must be addressed. Ferrate has potential for becoming the alternative of choice because of its aggressive oxidation properties and its negligible impact on the environment. However, there has been little industrial ...

    SBIR Phase I 2002 Environmental Protection Agency
  9. Novel Method for Ferrate Production

    SBC: Lynntech Inc.            Topic: N/A

    New environmental regulations have identified many of the currently used oxidizing agents employed for industrial waste control, disinfection, and wastewater treatment as a caveat that must be addressed. Ferrate has potential for becoming the alternative of choice because of its aggressive oxidation properties and its negligible impact on the environment. However, there has been little industrial ...

    SBIR Phase II 2002 Environmental Protection Agency
  10. Polymeric Coating by Ink-Jet Printing

    SBC: MicroFab Technologies Inc            Topic: N/A

    The ability to pattern multilayered polymers on a micro-level is valuable to a large number of applications in microelectronic manufacturing. Applications range from printing dielectric coatings and polymer resistors to printing active devices such as polymer LEDs and polymer transistors. The advantages of ink jet printing are: (1) one station can print multi-fluids, (2) non-flat substrates could ...

    SBIR Phase I 2002 Department of Commerce
US Flag An Official Website of the United States Government