You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Super-Precision Capacitance Bridge

    SBC: Andeen-Hagerling, Inc.            Topic: N/A

    NIST desires to develop a standard of pressure in the range 0.3 MPa to 10 MPa based on measurements of the dielectric constants of gaseous helium and argon. This requires capacitance measurements having a better linearity than can be made with any currently available product. It is proposed that the design of the currently most precise commercial capacitance bridge be modified to improve its linea ...

    SBIR Phase II 2004 Department of CommerceNational Institute of Standards and Technology
  2. Microfabrication and Micromaching- correct DUN# 142425888

    SBC: Atometric, Inc.            Topic: N/A

    Biotechnology, aerospace, automotive and communications industries need small ultra-precise, three dimensional parts for component miniaturization. Present metal cutting technology is rapidly reaching its limits. A new technology is required to accelerate this trend. Atometric will pursue innovations in ultra-precision multi-axis machine tools. The machining capacity will be within a cube of 50 mm ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  3. Micro-discharge Based Multi-Metal Emissions Monitoring System

    SBC: Cavition, Inc.            Topic: N/A

    Caviton has developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can b detected and the focus of this Phase II project is to develop a sampling system, carry out laboratory tests, then move to field tests of sampling and analysis. Finall ...

    SBIR Phase I 2004 Environmental Protection Agency
  4. SAFE AND ECONOMICAL CHLORINE DIOXIDE GENERATION

    SBC: Eltech Research Corpon            Topic: N/A

    SAFE, COST EFFECTIVE ALTERNATIVES TO CHLORINE TREATMENT OF DRINKING WATER FOR DISTRIBUTION AND DISINFECTION HAVE BEEN SOUGHT FOR SOME TIME. CHLORINE DIOXIDE IS A VIABLE ALTERNATIVE TO CHLORINE FOR THE TREATMENT OF EVEN POOR QUALITY WATER SUPPLIES AND THE REDUCTION OF POTENTIAL CANCER CAUSING CHLORINATED ORGANICS. ITS WIDESPREAD USE HAS BEEN INHIBITED BY THE COSTS AND/OR COMPLEXITY OF ITS PRODUCTIO ...

    SBIR Phase I 1989 Environmental Protection Agency
  5. DOUBLE HEAT EXCHANGES SYSTEM FOR MINIMIZING ENERGY AND POLLUTION CONTROL COSTS IN INDUSTRIAL PROCESSES

    SBC: Energy Innovations, Inc.            Topic: N/A

    THERE ARE NUMEROUS INDUSTRIAL PROCESSES REQUIRING THAT MATERIAL BE HEATED AND THEN SUBSEQUENTLY COOLED. IF MOST OF THIS HEAT IS RECOVERED AND RECYCLED TO THE OVEN, THE NET POWER INPUT TO THE OVEN COULD BE SUBSTANTIALLY REDUCED. THE KEY TO ACCOMPLISHING THIS IS AN INCREASE OF THE HEAT TRANSFER COEFFICIENT BETWEEN GAS AND MATERIAL SO THAT THE HEAT EXCHANGERS ARE RESASONABLY COMPACT. SIMPLE EXPERIMEN ...

    SBIR Phase I 1989 Environmental Protection Agency
  6. SMART Life Science Laboratory Solution

    SBC: Entara Technology Group, LLC            Topic: N/A

    A SMART Life Science prototype that facilitates the management of instrumentation data has far reaching implications. As much as the benefit is to an individual scientist, the greater impact affects the entire economy by facilitating the rapid launching of new scientific discoveries that cure disease and product new economic channels for firms. By improving process efficiencies in R&D organization ...

    SBIR Phase II 2004 Department of CommerceNational Institute of Standards and Technology
  7. Development of a Laboratory Scale CD-SAXS Device for Semiconductor Metrology Applications

    SBC: Jordan Valley Semiconductors, Inc.            Topic: N/A

    A semiconductor metrology tool will be developed employing the technique of small-angle x-ray scattering (SAXS) to measure the critical dimension (CD) of patterned device structures. The feasibility of the SAXS technique to measure CD has been shown using high-power synchrotron radiation facilities which are not of practical use to the semiconductor industry. The ultimate project goal is to produc ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  8. Monitoring Groundwater Contaminants

    SBC: Lynntech Inc.            Topic: N/A

    Chlorinated hydrocarbons represent the most prevalent contaminants in the subsurface, threatening the quality of groundwater at aquifers. Existing technologies for monitoring these contaminants require expensive, labor-intensive methods of sample collection and analysis. The goal of this Phase I research project is to develop a low-cost, compact, reliable, automated, unattended, and long-term mo ...

    SBIR Phase I 2004 Environmental Protection Agency
  9. Fluorescent Nanoparticle-Aptmer-Magnetic Bead Sensor for Bioterrorism Detection in Water

    SBC: Operational Techologies Corporation            Topic: N/A

    Some bioterrorism agents cause disease at very low infective doses and their presence can be masked by the environment. Therefore, ultrasensitive detection is required for homeland defense applications. In this Phase I research project, Operational Technologies Corporation (OpTech) proposes to couple DNA aptamers made by the Systematic Evolution of Ligands by Exponential Enrichment (SELEX) proce ...

    SBIR Phase I 2004 Environmental Protection Agency
  10. FEASIBILITY OF AN INTEGRATED CONTINUOUS PROCESS USING AUTO- MATIC INSTRUMENTATION AND STATAISTICAL ANALYSES TO REDUCE COSTS AND TO INCREASE THE EFFICIENCY OF PEAK DETECTION AND POLLUTION CONTROL IN UNDERGROUND STORAGE TANKS

    SBC: Production Monitoring &            Topic: N/A

    OVER THE LAST SEVERAL YEARS, THE EPA HAS DEVOTED MAJOR EF- FORTS TO IDENTIFY AND DOCUMENT THE MAGNITUDE OF THE RISKS OFENVIRONMENTAL POLLUTION DUE TO LEAKING UDERGROUND STORAGE TANKS (UST). IN APRIL 1987, THE EPA PUBLISHED THE PROPOSED REGULATIONS FOR THE OWNERS AND OPERATORS OF UST, WHICH ARE EXPECTED TO BE FINALIZEDD IN EARLY 1988. THESE REGULATIONS INCLUDE REQUIREMENTS FOR TANK TIGHTNESS TESTS, ...

    SBIR Phase II 1989 Environmental Protection Agency
US Flag An Official Website of the United States Government