You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. PROCESSED VAPOR GROWN GRAPHITE FIBERS FOR ELECTROMAGNETIC RAILGUNS

    SBC: Applied Sciences Inc.            Topic: N/A

    REQUIREMENTS FOR RAILGUN ARMATURES DICTATE MATERIALS PROPERTIES VALUESWHICH ARE DIFFICULT TO OBTAIN FROM CONVENTIONAL MATERIALS. THE NEED EXISTS FOR A MATERIAL WHICH HAS LOW DENSITY, HIGH MELTING POINT, HIGH THERMAL CONDUCTIVITY, LOW COEFFICIENT OF THERMAL EXPANSION, HIGH ELECTRICAL CONDUCTIVITY, HIGH VALUES FOR STRENGTH, AND GOOD CHARACTERISTICS OF LUBRICITY. GRAPHITE FIBER GROWN FROM PYROLYSIS O ...

    SBIR Phase II 1989 Department of DefenseMissile Defense Agency
  2. LASER PROPULSION THRUSTERS

    SBC: Combustion Sciences, Inc.            Topic: N/A

    LASER ROCKET PROPULSION RESEARCH RECENTLY HAS DEMONSTRATED SUBSTANTIALPOTENTIAL FOR THE CONVERSION OF HIGH POWER LASER ENERGY INTO THERMAL PROPULSIVE ENERGY, USING EITHER CONTINUOUS OR PULSED MODE LASER SOURCES. IT IS NOW POSSIBLE FOR THE FIRST TIME TO DEVELOP PROTOTYPE DESIGNS FOR ACTUAL LASER PROPULSION THRUSTERS THAT CAN BE BUILT AND TESTED AT REALISTIC LASER POWERS. TO ACCOMPLISH THIS, PREVIOU ...

    SBIR Phase II 1989 Department of DefenseMissile Defense Agency
  3. FEASIBILITY OF AN INTEGRATED CONTINUOUS PROCESS USING AUTO- MATIC INSTRUMENTATION AND STATAISTICAL ANALYSES TO REDUCE COSTS AND TO INCREASE THE EFFICIENCY OF PEAK DETECTION AND POLLUTION CONTROL IN UNDERGROUND STORAGE TANKS

    SBC: Production Monitoring &            Topic: N/A

    OVER THE LAST SEVERAL YEARS, THE EPA HAS DEVOTED MAJOR EF- FORTS TO IDENTIFY AND DOCUMENT THE MAGNITUDE OF THE RISKS OFENVIRONMENTAL POLLUTION DUE TO LEAKING UDERGROUND STORAGE TANKS (UST). IN APRIL 1987, THE EPA PUBLISHED THE PROPOSED REGULATIONS FOR THE OWNERS AND OPERATORS OF UST, WHICH ARE EXPECTED TO BE FINALIZEDD IN EARLY 1988. THESE REGULATIONS INCLUDE REQUIREMENTS FOR TANK TIGHTNESS TESTS, ...

    SBIR Phase II 1989 Environmental Protection Agency
  4. Aft Looking Spectrometer for Plume Characterization and Waking on Re-entry

    SBC: NANOHMICS INC            Topic: MDA16016

    Nanohmics proposes to develop a hyperspectral imager for aft-looking sensing of phenomenology associated with target vehicles.The payload is designed to operate with existing components and has no moving parts.The high spectral resolution will provide feedback for signature models and the spatial resolution will allow the spectral signatures to be associated with specific phenomena.Approved for Pu ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  5. Proactive Risk Monitoring Using Predictive Analytics

    SBC: ARCTOS Technology Solutions, LLC            Topic: MDA16T002

    Presently the missile defense systems are using a reactive and program-centric framework for assessing industrial base risk. The Phase I effort focused on developing a wide and deep network algorithm using Industrial Product-Support Vendor (IPV) Gen II program for predicting the probability of failure. The proposed Phase II effort leverages the Phase I work and will focus on three main goals:(1) I ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  6. Methodologies for Cost-Effective Measurement of Dynamic Material Properties or Characterization of Materials under Dynamic Loads

    SBC: PROTECTION ENGINEERING CONSULTANTS LLC            Topic: MDA16T003

    Explosions and high-velocity impacts can create strain rates on the order of 105 to 107 s-1. To simulate these events, first-principles codes require material models that are valid at these loading rates. Currently, the amount of test data, material models and material constants for this strain rate range is extremely limited, and an innovative and cost-effective laboratory test procedure is neede ...

    STTR Phase II 2018 Department of DefenseMissile Defense Agency
  7. SoldierBoost, Nutrient-Dense Soldier Food Bar Ration

    SBC: Systems & Materials Research Corporation            Topic: DLA163001

    Soldiers engaged in Sustained Operations can burn up to 6,000 kcal of energy per day, which cannot be compensated for by current rations - Meals, Ready-to-Eat and First Strike Rations only provide up to 3,750 kcal/day and 2,900 kcal/day, respectively. This energy debt is further aggravated by the fact that most soldiers "field strip" their rations, removing menu items that are undesirable, or that ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government