Award Data

Lead in household paint and dust is a serious health hazard as low level lead exposure can result in a number o adverse health effects, especially in children. On-site and real-time detection and quantification of lead in the paint/dust is very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as x-ray fluorescence ...

Lead in household paint and dust is a serious health hazard, as low-level lead exposure can result in a number of adverse health effects, especially in children. Onsite and real-time detection and quantification of lead in paint/dust are very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as X-ray fluorescenc ...

THERE ARE NUMEROUS INDUSTRIAL PROCESSES REQUIRING THAT MATERIAL BE HEATED AND THEN SUBSEQUENTLY COOLED. IF MOST OF THIS HEAT IS RECOVERED AND RECYCLED TO THE OVEN, THE NET POWER INPUT TO THE OVEN COULD BE SUBSTANTIALLY REDUCED. THE KEY TO ACCOMPLISHING THIS IS AN INCREASE OF THE HEAT TRANSFER COEFFICIENT BETWEEN GAS AND MATERIAL SO THAT THE HEAT EXCHANGERS ARE RESASONABLY COMPACT. SIMPLE EXPERIMEN ...

Polymer composites are widely used for automotive body panels to save weight, increase fuel efficiency, and eliminate corrosion. However, unlike metals, structural polymers are not electrically conductive; thus, they are not amenable to the industry standard technique of electrostatic spray painting (ESP). Current methods for adapting polymers to ESP pose serious environmental and economic chall ...

Polymer composites are used widely for automotive body panels to save weight, increase fuel efficiency, and eliminate corrosion. Unlike metals, however, structural polymers are not conductive electrically; thus, they are not amenable to the industry standard technique of electrostatic spray painting (ESP). Current methods for adapting polymers to ESP pose serious environmental and ec ...

The proposed sorbents will have potential applications in i) industrial wastewater treatment plants, ii) municipal wastewater treatment plants, iii) nuclear waste treatment plants, iv) drinking water treatment plants, v) several types of existing point-of-use and point-of-entry water purifying systems, and vi) for remediation of various mercury contaminated sites using permeable reactive barrier ( ...

The sorbent proposed to be developed by Lynntech, Inc., in this Phase I project will have potential applications in: (1) industrial wastewater treatment plants, (2) municipal wastewater treatment plants, (3) nuclear waste treatment plants, (4) drinking water treatment plants, (5) several types of existing point-of-use and point-of-entry water purifying systems, and (6) for remediation ...

Cupric chloride etchant is in wide use in the etching of copper, particularly in the manufacture of printed circuit boards. Currently, hazardous oxidants such as chlorine are used to regenerate this etchant. In addition, the hazardous waste generated must be hauled away and disposed of. The device under development will electrolytically regenerate the etchant without the addition of oxidizing c ...

Cupric chloride etchant is widely used in the etching of copper, particularly in the manufacture of printed circuit boards. Currently, hazardous oxidants such as chlorine are used to regenerate this etchant. In addition, the hazardous waste generated must be hauled away for disposal. In Phase II, Republic Anode Fabricators, Inc., will develop a device that will electrolytically regenerate the ...

OVER THE LAST SEVERAL YEARS, THE EPA HAS DEVOTED MAJOR EF- FORTS TO IDENTIFY AND DOCUMENT THE MAGNITUDE OF THE RISKS OFENVIRONMENTAL POLLUTION DUE TO LEAKING UDERGROUND STORAGE TANKS (UST). IN APRIL 1987, THE EPA PUBLISHED THE PROPOSED REGULATIONS FOR THE OWNERS AND OPERATORS OF UST, WHICH ARE EXPECTED TO BE FINALIZEDD IN EARLY 1988. THESE REGULATIONS INCLUDE REQUIREMENTS FOR TANK TIGHTNESS TESTS, ...