Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. SAFE AND ECONOMICAL CHLORINE DIOXIDE GENERATION

    SBC: Eltech Research Corpon            Topic: N/A

    SAFE, COST EFFECTIVE ALTERNATIVES TO CHLORINE TREATMENT OF DRINKING WATER FOR DISTRIBUTION AND DISINFECTION HAVE BEEN SOUGHT FOR SOME TIME. CHLORINE DIOXIDE IS A VIABLE ALTERNATIVE TO CHLORINE FOR THE TREATMENT OF EVEN POOR QUALITY WATER SUPPLIES AND THE REDUCTION OF POTENTIAL CANCER CAUSING CHLORINATED ORGANICS. ITS WIDESPREAD USE HAS BEEN INHIBITED BY THE COSTS AND/OR COMPLEXITY OF ITS PRODUCTIO ...

    SBIR Phase I 1989 Environmental Protection Agency
  2. DOUBLE HEAT EXCHANGES SYSTEM FOR MINIMIZING ENERGY AND POLLUTION CONTROL COSTS IN INDUSTRIAL PROCESSES

    SBC: Energy Innovations, Inc.            Topic: N/A

    THERE ARE NUMEROUS INDUSTRIAL PROCESSES REQUIRING THAT MATERIAL BE HEATED AND THEN SUBSEQUENTLY COOLED. IF MOST OF THIS HEAT IS RECOVERED AND RECYCLED TO THE OVEN, THE NET POWER INPUT TO THE OVEN COULD BE SUBSTANTIALLY REDUCED. THE KEY TO ACCOMPLISHING THIS IS AN INCREASE OF THE HEAT TRANSFER COEFFICIENT BETWEEN GAS AND MATERIAL SO THAT THE HEAT EXCHANGERS ARE RESASONABLY COMPACT. SIMPLE EXPERIMEN ...

    SBIR Phase I 1989 Environmental Protection Agency
  3. FEASIBILITY OF AN INTEGRATED CONTINUOUS PROCESS USING AUTO- MATIC INSTRUMENTATION AND STATAISTICAL ANALYSES TO REDUCE COSTS AND TO INCREASE THE EFFICIENCY OF PEAK DETECTION AND POLLUTION CONTROL IN UNDERGROUND STORAGE TANKS

    SBC: Production Monitoring &            Topic: N/A

    OVER THE LAST SEVERAL YEARS, THE EPA HAS DEVOTED MAJOR EF- FORTS TO IDENTIFY AND DOCUMENT THE MAGNITUDE OF THE RISKS OFENVIRONMENTAL POLLUTION DUE TO LEAKING UDERGROUND STORAGE TANKS (UST). IN APRIL 1987, THE EPA PUBLISHED THE PROPOSED REGULATIONS FOR THE OWNERS AND OPERATORS OF UST, WHICH ARE EXPECTED TO BE FINALIZEDD IN EARLY 1988. THESE REGULATIONS INCLUDE REQUIREMENTS FOR TANK TIGHTNESS TESTS, ...

    SBIR Phase II 1989 Environmental Protection Agency
  4. Replacements for PVC and PE Water Pipes

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER1C

    METSS proposes to design a novel polymer system based on polypropylene with covalently attached antioxidants to mitigate issues with chemical permeation and water quality with current waterpipe materials. Polypropylene was selected as it has inherently good physical properties and low permeability that will limit chemical migration from the outside, addressing one critical factor impacting water q ...

    SBIR Phase I 2018 Environmental Protection Agency
  5. Decontamination of Category A Viruses on Porous Surfaces and Sensitive Equipment

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER4A

    METSS will demonstrate the feasibility of utilizing two separate technologies, chlorine dioxide (ClO2) and Hot Air Decontamination (HAD; high temperature/low humidity) as on-site decontamination processes for treating_x000D_ Category A virus contaminated items including porous materials (e.g., upholstery, bedding, fabric, carpet, unpainted wood); sensitive equipment; and potentially reusable mater ...

    SBIR Phase I 2018 Environmental Protection Agency
  6. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: UNIVERSAL TECHNOLOGY CORPORATION            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: UNIVERSAL TECHNOLOGY CORPORATION            Topic: DLA181002

    This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. SoldierBoost, Nutrient-Dense Soldier Food Bar Ration

    SBC: Systems & Materials Research Corporation            Topic: DLA163001

    Soldiers engaged in Sustained Operations can burn up to 6,000 kcal of energy per day, which cannot be compensated for by current rations - Meals, Ready-to-Eat and First Strike Rations only provide up to 3,750 kcal/day and 2,900 kcal/day, respectively. This energy debt is further aggravated by the fact that most soldiers "field strip" their rations, removing menu items that are undesirable, or that ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government