List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Replacements for PVC and PE Water Pipes

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER1C

    METSS proposes to design a novel polymer system based on polypropylene with covalently attached antioxidants to mitigate issues with chemical permeation and water quality with current waterpipe materials. Polypropylene was selected as it has inherently good physical properties and low permeability that will limit chemical migration from the outside, addressing one critical factor impacting water q ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Decontamination of Category A Viruses on Porous Surfaces and Sensitive Equipment

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER4A

    METSS will demonstrate the feasibility of utilizing two separate technologies, chlorine dioxide (ClO2) and Hot Air Decontamination (HAD; high temperature/low humidity) as on-site decontamination processes for treating_x000D_ Category A virus contaminated items including porous materials (e.g., upholstery, bedding, fabric, carpet, unpainted wood); sensitive equipment; and potentially reusable mater ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Additive Manufacturing Sensor Fusion Technologies for Process Monitoring and Control.

    SBC: UNIVERSAL TECHNOLOGY CORPORATION            Topic: DLA18A001

    Universal Technology Corporation (UTC) has teamed with the University of Dayton Research Institute (UDRI), Stratonics, and Macy Consulting to demonstrate not only the transitionability into commercial systems, but also to develop the data analytics and monitoring and control requirements to extract the full value fromseveral sensors, including the Stratonics ThermaViz, acoustic and profilometry se ...

    STTR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: UNIVERSAL TECHNOLOGY CORPORATION            Topic: DLA181002

    This project aims to make Laser Powder Bed Fusion (LPBF) additive manufacturing a practical tool for supply chain management for the Defense Logistics Agency.The key step is developing process standardization to make LBPF quality vendor independent. This project will seek to demonstrate the use of a promising high speed melt pool monitoring device as a practical means to establish such process sta ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  5. SoldierBoost, Nutrient-Dense Soldier Food Bar Ration

    SBC: Systems & Materials Research Corporation            Topic: DLA163001

    Soldiers engaged in Sustained Operations can burn up to 6,000 kcal of energy per day, which cannot be compensated for by current rations - Meals, Ready-to-Eat and First Strike Rations only provide up to 3,750 kcal/day and 2,900 kcal/day, respectively. This energy debt is further aggravated by the fact that most soldiers "field strip" their rations, removing menu items that are undesirable, or that ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  6. Tamper Resistant/Anti-counterfeit Packaging and Labeling Innovation Experiment (TRAPLINE)

    SBC: EVANHOE & ASSOCIATES, INC.            Topic: DLA163003

    This SBIR Topic endeavors to address the in-transit risks associated with shipment from DLA centers to the end user, and in particular the risk of tampering or insertion of counterfeit materials without the shipper or receiver being able to detect tampering while in route. The proposed Tamper Resistant/Anti-counterfeit Packaging and Labeling Innovation Experiment (TRAPLINE) Research and Developme ...

    SBIR Phase I 2017 Department of DefenseDefense Logistics Agency
  7. Low Cost Carbon Fluoride Active Materials for BA-5790/U Lithium Batteries

    SBC: AMERICAN ENERGY TECHNOLOGIES COMPANY            Topic: DLA152001

    American Energy Technologies Co. will partner with Eagle Picher Technologies in order to develop a lean and efficient method for synthesis of Lithium battery grade carbon monofluoride (CFx). The focus of the development / prototyping work will be on continuous processing, application of domestic raw materials and use of modern material de-aggregation techniques for particles of the end-product. Pr ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  8. Upscaling and Optimization of Magnet to Magnet Recycling

    SBC: Urban Mining Company            Topic: DLA161003

    Neodymium-iron-boron rare-earth based magnets are key components of mobile phones, electric vehicles, wind-turbines and many critical US defense systems. Despite their importance, the US is completely reliant on imports from China for their supply. Future supply risk renders this situation untenable, yet re-establishing the supply chain for these magnets in the US could take two decades. Urban Min ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  9. SoldierBoost, Nutrient-Dense Soldier Food Supplement

    SBC: Systems & Materials Research Corporation            Topic: DLA163001

    Soldiers engaged in high intensity operations can burn up to 4,500 kcal of energy per day, which cannot be compensated for by current rationsMeals Ready to Eat (MREs) and First Strike Rations (FSRs) only provide up to 3,750 kcal/day and 2,900 kcal/day, respectively. This energy debt is further aggravated by the fact that most soldiers field strip their MREs, removing menu items that are undesirabl ...

    SBIR Phase I 2017 Department of DefenseDefense Logistics Agency
  10. Lab-on-a-chip sensors for organic pollutants in homes

    SBC: Prometheus SenTech LLC            Topic: 15NCER01

    Exposure to hazardous organic compounds (OCs) in the indoor environment can cause serious health issues. There are no commercially available devices for inexpensive autonomous continuous monitoring of OCs that generates actionable data (identification and quantification of the compound) that can be used for reducing the health risks associated with OC exposure. The proposed sensor technology has ...

    SBIR Phase I 2016 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government