List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: ORBIS SIBRO, INC.            Topic: DLA171002

    ORBIS proposes to Address SBIR DLA171-002 by developing efficient and effective processes to reverse engineer RPPOB Candidate Items. ORBIS has a wealth of experience in supporting DoD systems and components and is well suited to addressing the backlog of unsupported equipment .

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  2. Increase Competition through Small Business Source Approval Aircraft Launch and Recovery Equipment (ALRE) Critical Safety/Critical Application Items (CSI/CAI)

    SBC: FORM FIT AND FUNCTION LLC            Topic: DLA172001

    This SBIR Phase I proposal to the Defense Logistics Agency (DLA), requests funding for Form Fit and Function, LLC, a small disadvantaged, HUBZone Certified Business, to perform research in the development of an SAR package for NSN 3020-01-560-8493, Pulley, Groove.F3's proven experience in manufacturing and SAR package development, give F3 an advantage in development and decreases Government risk. ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  3. SoldierBoost, Nutrient-Dense Soldier Food Bar Ration

    SBC: SYSTEMS & MATERIALS RESEARCH CORPORATION            Topic: DLA163001

    Soldiers engaged in Sustained Operations can burn up to 6,000 kcal of energy per day, which cannot be compensated for by current rations - Meals, Ready-to-Eat and First Strike Rations only provide up to 3,750 kcal/day and 2,900 kcal/day, respectively. This energy debt is further aggravated by the fact that most soldiers "field strip" their rations, removing menu items that are undesirable, or that ...

    SBIR Phase II 2018 Department of DefenseDefense Logistics Agency
  4. SoldierBoost, Nutrient-Dense Soldier Food Supplement

    SBC: SYSTEMS & MATERIALS RESEARCH CORPORATION            Topic: DLA163001

    Soldiers engaged in high intensity operations can burn up to 4,500 kcal of energy per day, which cannot be compensated for by current rationsMeals Ready to Eat (MREs) and First Strike Rations (FSRs) only provide up to 3,750 kcal/day and 2,900 kcal/day, respectively. This energy debt is further aggravated by the fact that most soldiers field strip their MREs, removing menu items that are undesirabl ...

    SBIR Phase I 2017 Department of DefenseDefense Logistics Agency
  5. Tamper Resistant/Anti-Counterfeit Package Labeling

    SBC: Tetramer Technologies,L.L.C.            Topic: DLA163003

    Tetramer Technologies, LLC, an advanced materials R&D company in South Carolina, will develop a novel security pigment and ink to be used in the production of tamper-evident and anti-counterfeit labelling and packaging. Current security inks often require extensive training or expensive equipment to be validated. Tetramer will model the desired novel pigment properties, synthesize pigments with th ...

    SBIR Phase I 2017 Department of DefenseDefense Logistics Agency
  6. Low Cost Carbon Fluoride Active Materials for BA-5790/U Lithium Batteries

    SBC: AMERICAN ENERGY TECHNOLOGIES COMPANY            Topic: DLA152001

    American Energy Technologies Co. will partner with Eagle Picher Technologies in order to develop a lean and efficient method for synthesis of Lithium battery grade carbon monofluoride (CFx). The focus of the development / prototyping work will be on continuous processing, application of domestic raw materials and use of modern material de-aggregation techniques for particles of the end-product. Pr ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  7. Upscaling and Optimization of Magnet to Magnet Recycling

    SBC: Urban Mining Company            Topic: DLA161003

    Neodymium-iron-boron rare-earth based magnets are key components of mobile phones, electric vehicles, wind-turbines and many critical US defense systems. Despite their importance, the US is completely reliant on imports from China for their supply. Future supply risk renders this situation untenable, yet re-establishing the supply chain for these magnets in the US could take two decades. Urban Min ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  8. Medical 3D Printing

    SBC: REIFY, LLC            Topic: DLA152002

    This project aims to create a commercially viable 3D printed prosthetic product line which is superior, cost effective and more efficiently utilizes clinician time. Phase 1 demonstrated the feasibility of a process that uses a low-cost 3D scanner to capture limb shapes, converts the scan data into a computer model file of the 3D printable socket, and prints a strong, durable socket that can be mou ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  9. Industrial Process Pollution Reduction by Development of Amorphous Biogenic Silica to Replace Fumed Silica

    SBC: SioTeX Corporation            Topic: 14NCER1A

    Fumed silica is an important additive in many products including paints, plastics and tires, but it is produced by an energy-intensive costly, toxic and hazardous process. SioTex has developed a superior triple green replacement for fumed silica that produces no toxic waste, uses little energy, and is inexpensive.  Our patent pending technology uses rice hulls, a bio-waste, as the feedstock.  Us ...

    SBIR Phase II 2016 Environmental Protection Agency
  10. SYSTEM AND PROCESS FOR 3D PRINTING PROSTHETIC COMPONENTS

    SBC: REIFY, LLC            Topic: DLA152002

    Orthotics and Prosthetic (O&P) clinics serve as the primary facilities at which 1.9 million U.S. amputees receive care. The design and fabrication of custom prosthetic devices is an integral part of how these O&P facilities provide patient care. Current prosthetic fabrication methods are costly and labor intensive, relying heavily on traditional manual manufacturing techniques. 3D-scanning and pri ...

    SBIR Phase I 2016 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government