You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: ADVANCED POWDER SOLUTIONS INC            Topic: DLA08001

    Understanding that saving weight without sacrificing performance on a vehicle is important, the objective of this program is to continue to demonstrate advanced lightweight materials that can have multi-functional capability and be discretely made into parts for DLA. Many applications will have specific requirements of high thermal conductivity, low thermal conductivity, radiation resistance, Mod ...

    SBIR Phase I 2009 Department of DefenseDefense Logistics Agency
  2. Organophosphate Degrading Enzymes

    SBC: AGAVE BIOSYSTEMS INC.            Topic: N/A

    Agve BioSystems in collaboration with Carl A. Batt propose to develop decon-nanoparticles which will leverage ongoing opportunities in enzyme engineering and the fabrication of functionalized magnetic nanoparticles. Enhanced performance will be engineered into the system to improve the catalytic degradation of chemical agents. Through an iterative process optimizing the particles and the enzyme ...

    SBIR Phase I 2009 Environmental Protection Agency
  3. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: NANOHMICS INC            Topic: DLA07001

    Ceramics materials have great potential in a wide variety of applications but their use is often limited by the associated high cost of machining. Developing laser assisted machining (LAM) for a commercial environment will greatly mitigate these costs. Nanohmics and Dr. Y. C. Shin of Purdue University have teamed with Progressive

    SBIR Phase II 2009 Department of DefenseDefense Logistics Agency
  4. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: Systems & Materials Research Corporation            Topic: DLA08001

    Wet installation of fasteners offers proven corrosion protection and fuel sealing in aircraft structures, but it''''s a labor-intensive, messy, hazmat-laden process whose quality can vary significantly from fastener to fastener. Under a Navy SBIR Phase II, SMRC has developed a proprietary process called QwikSeal® for pre-coating fasteners with cure-blocked sealant, then overcoating the pre-applie ...

    SBIR Phase I 2009 Department of DefenseDefense Logistics Agency
  5. Organophosphate Degrading Enzymes

    SBC: AGAVE BIOSYSTEMS INC.            Topic: 08NCERI1

    Agave BioSystems in collaboration with Carl A. Batt proposes to develop decon-nanoparticles, which will leverage ongoing opportunities in enzyme engineering and the fabrication of functionalized magnetic nanoparticles. Enhanced performance will be engineered into the system to improve the catalytic degradation of chemical agents. Through an iterative process optimizing the particles and the enzy ...

    SBIR Phase I 2009 Environmental Protection Agency
  6. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: N/A

    Lead in household paint and dust is a serious health hazard, as low level lead exposure can result in a number of adverse health effects, especially in children. Onsite and real time detection and quantification of lead in paint/dust are very important to homeowners and certified lead based paint removal professionals. Toward this end, both field-portable equipment (such as X ray fluorescence ins ...

    SBIR Phase II 2007 Environmental Protection Agency
  7. Investigation of Solvent Toxicity in Bacterial Strains Involved in Butanol Production

    SBC: Integrated Genomics, Inc.            Topic: N/A

    Reduction in dependency of imported petroleum and the quest to identify renewable energy sources has lead to a search for innovative biofuels derived from renewable biomass, that promise long-term reductions in greenhouse gas emissions. Butanol is one possible biofuel. It is an industrial fuel that can be produced from crops using acetone-butanol (AB) fermentation by butanolagenic microbes, such ...

    SBIR Phase I 2007 Environmental Protection Agency
  8. Reduced NOx Using On-Board Plasma Generated Hydrogen

    SBC: LYNNTECH INC.            Topic: N/A

    Off road diesel powered equipment (i.e., tractors, dozers, excavators, backhoes, surface equipment, etc.) are designed with lifetimes of more the 25 to 30 years. As such, most of the diesel equipment in use today were manufactured before there were any emission standards at all, much less are up to stringent requirements of modern vehicle emissions. In order to combat this massive source of poll ...

    SBIR Phase I 2007 Environmental Protection Agency
  9. An Inexpensive Biological and Chemical Decontamination Solution from a Powdered Concentrate

    SBC: LYNNTECH INC.            Topic: N/A

    All levels of government and law enforcement are making plans to contain the effects of a terrorist attach using CBW agents. An important containment strategy is to enable emergency response personnel (police, fire fighters, etc.) to neutralize the threat using decontamination methods. The two primary decontamination solutions used by the military are supertropical bleach and DS2, neither of whi ...

    SBIR Phase I 2007 Environmental Protection Agency
  10. Laser Assisted Machining with Integrated Dynamic Tooling

    SBC: NANOHMICS INC            Topic: DLA07001

    Ceramics materials have great potential in a wide variety of applications but their use is often limited by the associated high cost of machining. To alleviate this Nanohmics Inc. and Dr. Y. C. Shin of Purdue University propose to apply the recently developed technique of laser assisted machining (LAM) coupled with a specially designed dynamic tooling system to develop a means of easily, rapidly a ...

    SBIR Phase I 2007 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government