Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. SYSTEM OF CONTINUOUS EXTENSIVE MONITORING OF DRINKING, NATURAL AND INDUSTRIAL WATERS

    SBC: ECI TECHNOLOGY, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Environmental Protection Agency
  2. SCRAP TIRE PYROLYSIS-- PRODUCTION OF HIGHLY ENHANCED MARKETABLE PRODUCTS

    SBC: Hichem Corp.            Topic: N/A

    RESEARCH WILL BE CONDUCTED BY HICHEM CORPORATION, TO DEVELOP A NEW TECHNOLOGY FOR PYROLYSIS OF SCRAP TIRES. DISPOSAL OF USED TIRES IS A BIG PROBLEM IN THE WORLD, ESPECIALLY USA, SINCE MORE THAN 2.5 MILLION TIRES ARE DISCARDED EACH YEAR. MOST OF THESE TIRES ARE DISPOSED IN LANDFILLS. PYROLYSIS OF SCRAP TIRES HELPS TO RECOVER AND REUSE MOST OF THE VALUABLE CHEMICAL AVAILABLE IN TIRES. PYROLYSIS OF S ...

    SBIR Phase II 1994 Environmental Protection Agency
  3. IMPROVED METHOD FOR HEATING CATALYTIC CONVERTERS OF VEHICLES TO ATTAIN ULTRA-LOW EMISSIONS

    SBC: Lynntech Inc.            Topic: N/A

    THE THREE-WAY CATALYTIC CONVERTER IS THE MOST IMPORTANT DEVICE MAKING TODAY'S AUTOMOBILES COMPLY WITH EXISTING EMISSION LAWS. THE FIRST TWO OR THREE MILES IN A TYPICAL 22-MINUTE, 12-MILE COMUTE IN TODAY'S VEHICLES RESULT IN THE EMISSION OF HALF OF THE TOTAL NON-METHANE HYDROCARBONS, WHICH RESULT IN THE PRODUCTION OF URBAN SMOG, AS WELL AS HALF OF THE TOXIC CO EMISSIONS. THIS OCCURS BECAUSE THE CAT ...

    SBIR Phase II 1994 Environmental Protection Agency
  4. A CONTINUOUS EMISSION MONITORING DEVICE FOR AIRBORNE METALS

    SBC: OPTOMECHANICAL ENTERPRISES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Environmental Protection Agency
  5. Novel Method for DBP Precursor Removal

    SBC: Universal Fuel Development            Topic: N/A

    N/A

    SBIR Phase I 1994 Environmental Protection Agency
  6. Advanced Aluminum Alloy: Extruded Thin Wall Structural Concepts

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The primary objective of this proposed work is to develop a method of producing integrally stiffened, complex shaped monolithic structural components in high strength aluminum alloys at a lower cost and lighter weight than equivalent conventional built-up assemblies. In Phase I the feasibility of attaining this objective will be demonstrated by conducting a series of subscale experiments based upo ...

    SBIR Phase I 1994 Department of DefenseAir Force
  7. ALL BACK CONTACT ULTRA-THIN GaAs SOLAR CELL WITH ZERO GRID OBSCURATION

    SBC: ASTROPOWER, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  8. Laser-Activated X-Ray Source

    SBC: BIO-IMAGING RESEARCH, INC.            Topic: N/A

    We propose a method of generating x-rays that will combine high instantaneous output of rotating-anode x-ray tubes with continuous cooling rates as great or greater than fixed-anode tubes. This combination can be achieved in a mechanically simple way, and will reduce spot wobble without vacuum seals, vacuum bearings, deflecting field, or conventional cathodes, by either thermionic or photoemission ...

    SBIR Phase I 1994 Department of DefenseAir Force
  9. Advanced Turbulence Models for High Mach Number Wall-Bounded Flows

    SBC: Cambridge Hydrodyn Inc            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  10. Bias Dependence Noise Modeling of Heterojunction Bipolar Transistors

    SBC: Compact Software, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
US Flag An Official Website of the United States Government