Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. DOUBLE HEAT EXCHANGES SYSTEM FOR MINIMIZING ENERGY AND POLLUTION CONTROL COSTS IN INDUSTRIAL PROCESSES

    SBC: Energy Innovations, Inc.            Topic: N/A

    THERE ARE NUMEROUS INDUSTRIAL PROCESSES REQUIRING THAT MATERIAL BE HEATED AND THEN SUBSEQUENTLY COOLED. IF MOST OF THIS HEAT IS RECOVERED AND RECYCLED TO THE OVEN, THE NET POWER INPUT TO THE OVEN COULD BE SUBSTANTIALLY REDUCED. THE KEY TO ACCOMPLISHING THIS IS AN INCREASE OF THE HEAT TRANSFER COEFFICIENT BETWEEN GAS AND MATERIAL SO THAT THE HEAT EXCHANGERS ARE RESASONABLY COMPACT. SIMPLE EXPERIMEN ...

    SBIR Phase I 1989 Environmental Protection Agency
  2. SCRAP TIRE PYROLYSIS-- PRODUCTION OF HIGHLY ENHANCED MARKETABLE PRODUCTS

    SBC: Hichem Corp.            Topic: N/A

    RESEARCH WILL BE CONDUCTED BY HICHEM CORPORATION, TO DEVELOP A NEW TECHNOLOGY FOR PYROLYSIS OF SCRAP TIRES. DISPOSAL OF USED TIRES IS A BIG PROBLEM IN THE WORLD, ESPECIALLY USA, SINCE MORE THAN 2.5 MILLION TIRES ARE DISCARDED EACH YEAR. MOST OF THESE TIRES ARE DISPOSED IN LANDFILLS. PYROLYSIS OF SCRAP TIRES HELPS TO RECOVER AND REUSE MOST OF THE VALUABLE CHEMICAL AVAILABLE IN TIRES. PYROLYSIS OF S ...

    SBIR Phase II 1994 Environmental Protection Agency
  3. SCRAP TIRE PYROLYSIS-- PRODUCTION OF HIGHLY ENHANCED MARKETABLE PRODUCTS

    SBC: Hichem Corp.            Topic: N/A

    N/A

    SBIR Phase I 1993 Environmental Protection Agency
  4. IMPROVED METHOD FOR HEATING CATALYTIC CONVERTERS OF VEHICLES TO ATTAIN ULTRA-LOW EMISSIONS

    SBC: Lynntech Inc.            Topic: N/A

    THE THREE-WAY CATALYTIC CONVERTER IS THE MOST IMPORTANT DEVICE MAKING TODAY'S AUTOMOBILES COMPLY WITH EXISTING EMISSION LAWS. THE FIRST TWO OR THREE MILES IN A TYPICAL 22-MINUTE, 12-MILE COMUTE IN TODAY'S VEHICLES RESULT IN THE EMISSION OF HALF OF THE TOTAL NON-METHANE HYDROCARBONS, WHICH RESULT IN THE PRODUCTION OF URBAN SMOG, AS WELL AS HALF OF THE TOXIC CO EMISSIONS. THIS OCCURS BECAUSE THE CAT ...

    SBIR Phase II 1994 Environmental Protection Agency
  5. IMPROVED METHOD FOR HEATING CATALYTIC CONVERTERS OF VEHICLES TO ATTAIN ULTRA-LOW EMISSIONS

    SBC: Lynntech Inc.            Topic: N/A

    N/A

    SBIR Phase I 1993 Environmental Protection Agency
  6. FEASIBILITY OF AN INTEGRATED CONTINUOUS PROCESS USING AUTO- MATIC INSTRUMENTATION AND STATAISTICAL ANALYSES TO REDUCE COSTS AND TO INCREASE THE EFFICIENCY OF PEAK DETECTION AND POLLUTION CONTROL IN UNDERGROUND STORAGE TANKS

    SBC: Production Monitoring &            Topic: N/A

    OVER THE LAST SEVERAL YEARS, THE EPA HAS DEVOTED MAJOR EF- FORTS TO IDENTIFY AND DOCUMENT THE MAGNITUDE OF THE RISKS OFENVIRONMENTAL POLLUTION DUE TO LEAKING UDERGROUND STORAGE TANKS (UST). IN APRIL 1987, THE EPA PUBLISHED THE PROPOSED REGULATIONS FOR THE OWNERS AND OPERATORS OF UST, WHICH ARE EXPECTED TO BE FINALIZEDD IN EARLY 1988. THESE REGULATIONS INCLUDE REQUIREMENTS FOR TANK TIGHTNESS TESTS, ...

    SBIR Phase II 1989 Environmental Protection Agency
  7. Novel Method for DBP Precursor Removal

    SBC: Universal Fuel Development            Topic: N/A

    N/A

    SBIR Phase I 1994 Environmental Protection Agency
  8. Industrial Process Pollution Reduction by Development of Amorphous Biogenic Silica to Replace Fumed Silica

    SBC: SioTeX Corporation            Topic: 14NCER1A

    Fumed silica is an important additive in many products, including paints, plastics and tires, and is a $1.5 billion market with a 6 percent growth rate. However, fumed silica producers rely on an energy- intensive, costly and hazardous process. The air pollution resulting from the energy utilized to produce fumed silica is a combination of carbon emissions from the production of raw materials, ene ...

    SBIR Phase I 2015 Environmental Protection Agency
  9. Low Cost Manufacturing Improvements for Discrete Part Manufacturing

    SBC: ADVANCED POWDER SOLUTIONS INC            Topic: DLA08001

    APS has assembled a world class team to manufacture net shape light weight materials. The team will utilize Additive Manufacturing consolidation techniques to make larger parts. The focus will be on replacing Beryllium and Aluminum. Commercialization of these materials is a key element of the program.

    SBIR Phase II 2015 Department of DefenseDefense Logistics Agency
  10. Low Cost Carbon Fluoride Active Materials for BA-5790/U Lithium Batteries

    SBC: AMERICAN ENERGY TECHNOLOGIES COMPANY            Topic: DLA152001

    American Energy Technologies Co. will partner with Eagle Picher Technologies and Alion Science & Technology in order to develop a lean and efficient method for synthesis of Lithium battery grade carbon monofluoride (CFx). The focus of the development work will be on continuous processing, application of domestic raw materials and use of modern material de-aggregation techniques for particles of th ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government