You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Rapid Indicator for Pollution

    SBC: CEDAR Systems            Topic: N/A

    CEDAR Systems responds to the EPAs need for an inexpensive, convenient and rapid analytical method for the detection of pollution indicators for such as E. coli and enterococci in beach and other recreational waters as a means of identifying risk before exposure has taken place. Currently available tests are far from ideal in that they all require significant incubation periods (i.e. 18+ hours) t ...

    SBIR Phase I 2007 Environmental Protection Agency
  2. Chemical Microsensors and Instrumentation for Continuous Monitoring and Control of Mercury Emissions

    SBC: Senova Corp.(chemalert)            Topic: N/A

    N/A

    SBIR Phase I 1994 Environmental Protection Agency
  3. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: N/A

    Lead in household paint and dust is a serious health hazard, as low level lead exposure can result in a number of adverse health effects, especially in children. Onsite and real time detection and quantification of lead in paint/dust are very important to homeowners and certified lead based paint removal professionals. Toward this end, both field-portable equipment (such as X ray fluorescence ins ...

    SBIR Phase II 2007 Environmental Protection Agency
  4. DOUBLE HEAT EXCHANGES SYSTEM FOR MINIMIZING ENERGY AND POLLUTION CONTROL COSTS IN INDUSTRIAL PROCESSES

    SBC: Energy Innovations, Inc.            Topic: N/A

    THERE ARE NUMEROUS INDUSTRIAL PROCESSES REQUIRING THAT MATERIAL BE HEATED AND THEN SUBSEQUENTLY COOLED. IF MOST OF THIS HEAT IS RECOVERED AND RECYCLED TO THE OVEN, THE NET POWER INPUT TO THE OVEN COULD BE SUBSTANTIALLY REDUCED. THE KEY TO ACCOMPLISHING THIS IS AN INCREASE OF THE HEAT TRANSFER COEFFICIENT BETWEEN GAS AND MATERIAL SO THAT THE HEAT EXCHANGERS ARE RESASONABLY COMPACT. SIMPLE EXPERIMEN ...

    SBIR Phase I 1989 Environmental Protection Agency
  5. SCRAP TIRE PYROLYSIS-- PRODUCTION OF HIGHLY ENHANCED MARKETABLE PRODUCTS

    SBC: Hichem Corp.            Topic: N/A

    RESEARCH WILL BE CONDUCTED BY HICHEM CORPORATION, TO DEVELOP A NEW TECHNOLOGY FOR PYROLYSIS OF SCRAP TIRES. DISPOSAL OF USED TIRES IS A BIG PROBLEM IN THE WORLD, ESPECIALLY USA, SINCE MORE THAN 2.5 MILLION TIRES ARE DISCARDED EACH YEAR. MOST OF THESE TIRES ARE DISPOSED IN LANDFILLS. PYROLYSIS OF SCRAP TIRES HELPS TO RECOVER AND REUSE MOST OF THE VALUABLE CHEMICAL AVAILABLE IN TIRES. PYROLYSIS OF S ...

    SBIR Phase II 1994 Environmental Protection Agency
  6. Investigation of Solvent Toxicity in Bacterial Strains Involved in Butanol Production

    SBC: Integrated Genomics, Inc.            Topic: N/A

    Reduction in dependency of imported petroleum and the quest to identify renewable energy sources has lead to a search for innovative biofuels derived from renewable biomass, that promise long-term reductions in greenhouse gas emissions. Butanol is one possible biofuel. It is an industrial fuel that can be produced from crops using acetone-butanol (AB) fermentation by butanolagenic microbes, such ...

    SBIR Phase I 2007 Environmental Protection Agency
  7. IMPROVED METHOD FOR HEATING CATALYTIC CONVERTERS OF VEHICLES TO ATTAIN ULTRA-LOW EMISSIONS

    SBC: LYNNTECH INC.            Topic: AirQuality

    THE THREE-WAY CATALYTIC CONVERTER IS THE MOST IMPORTANT DEVICE MAKING TODAY'S AUTOMOBILES COMPLY WITH EXISTING EMISSION LAWS. THE FIRST TWO OR THREE MILES IN A TYPICAL 22-MINUTE, 12-MILE COMUTE IN TODAY'S VEHICLES RESULT IN THE EMISSION OF HALF OF THE TOTAL NON-METHANE HYDROCARBONS, WHICH RESULT IN THE PRODUCTION OF URBAN SMOG, AS WELL AS HALF OF THE TOXIC CO EMISSIONS. THIS OCCURS BECAUSE THE CAT ...

    SBIR Phase II 1994 Environmental Protection Agency
  8. Reduced NOx Using On-Board Plasma Generated Hydrogen

    SBC: LYNNTECH INC.            Topic: N/A

    Off road diesel powered equipment (i.e., tractors, dozers, excavators, backhoes, surface equipment, etc.) are designed with lifetimes of more the 25 to 30 years. As such, most of the diesel equipment in use today were manufactured before there were any emission standards at all, much less are up to stringent requirements of modern vehicle emissions. In order to combat this massive source of poll ...

    SBIR Phase I 2007 Environmental Protection Agency
  9. An Inexpensive Biological and Chemical Decontamination Solution from a Powdered Concentrate

    SBC: LYNNTECH INC.            Topic: N/A

    All levels of government and law enforcement are making plans to contain the effects of a terrorist attach using CBW agents. An important containment strategy is to enable emergency response personnel (police, fire fighters, etc.) to neutralize the threat using decontamination methods. The two primary decontamination solutions used by the military are supertropical bleach and DS2, neither of whi ...

    SBIR Phase I 2007 Environmental Protection Agency
  10. Laser Assisted Machining with Integrated Dynamic Tooling

    SBC: NANOHMICS INC            Topic: DLA07001

    Ceramics materials have great potential in a wide variety of applications but their use is often limited by the associated high cost of machining. To alleviate this Nanohmics Inc. and Dr. Y. C. Shin of Purdue University propose to apply the recently developed technique of laser assisted machining (LAM) coupled with a specially designed dynamic tooling system to develop a means of easily, rapidly a ...

    SBIR Phase I 2007 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government