Award Data

This D2P2 program plans to explore a new refractory coating technology to successfully coat additively manufactured (AM) C103 components that exhibit variability in surface roughness, 3D geometrical complexity and build orientation with precision-engineer

This proposal follows the DLA SBIR Phase 1 Contract SP4701-21-P-0075. It seeks resources to move to Phase 2 so that the lessons learned and data developed in Phase 1 will further expand on the solution, including the field demonstration for replacing the plastic packaging in food service with the biodegradable Cellulosic Bio-Polymer (CBP) packaging to address military needs. Phase 1 was a great le ...

Kaney is transitioning MAGTORQUE™ technology for platforms within the Air Force’s Next Generation Air Dominance (NGAD) program. Kaney’s disruptive MAGTORQUE™ technology provides enhanced actuator precision via the strategic integration of magnetic materials to achieve zero backlash actuation, however this zero-backlash actuation requires additional magnetic materials that impact overall ac ...

A passive multimode IR and RF sensor fusion platform in a missile seeker guidance system would greatly benefit a missile’s capabilities in tracking and locking to a target. The strengths of RF and IR somewhat complement each other and the use of both can greatly increase the system’s ability to react to current countermeasures by independently selecting a disaffected sensor’s data to follow. ...

Type II superlattices (T2SL) represent a promising material system capable of delivering very producible, large-format broadband MWIR and LWIR focal plane arrays (FPAs). High temperature operation of current MCT based FPAs is limited by inherent defects in the II-VI material and strong Auger recombination. T2SLs are based upon mature III-V materials and would provide high material quality, lower s ...

Redacted

The proposed project intends to reduce the technical and financial risks associated with a disruptive battery technology so that DoD program executive officers and private investors are inclined to finance the commercialization of the technology. The proj

Nostromo, LLC  (“Nostromo”) proposes to: (1) optimizes propellant combustion spectrum to produce radiation in a wavelength that optimally charges phosphors; (2) develop and refine a translucent epoxy matrix that can be incorporated into 40mm training and operational cartridges; (3) design, optimize and test phosphors that are configurable in a thin translucent epoxy and can be readily charged ...

Pepin Associates, Inc. has developed a unique, aligned discontinuous textile reinforcement for composite structures.  This reinforcement architecture is composed of short, overlapped tow segments.  The architecture allows the textile to stretch in its reinforcement direction.  This ability permits rapid fabrication of complex shaped thermal protection system structures from simple low cost sh ...

Kaney Inc. (Kaney) proposes development of a SAR package and development plan for National Stock Number (NSN) 6150-01-629-3728, a Battery Connector Assembly. This battery connector assembly is out of stock at two different suppliers (but available at a third supplier, please see below in Figure 6-1), and the NSN pertains to F-15C and F-15D based platforms including variants currently flown by some ...