You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Micro-Discharge Based Multi-Metal Emissions Monitoring System

    SBC: Cavition, Inc.            Topic: 04NCERP2

    Caviton, Inc., developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can be detected, and the focus of this Phase II research project is to develop a sampling system, carry out laboratory tests, and perform field tests of sampling and an ...

    SBIR Phase II 2005 Environmental Protection Agency
  2. Nanoadsorbent and Microwave Technology to Capture and Recover Organic Vapors

    SBC: ADS Technoogies, Inc.            Topic: N/A

    Emissions of volatile organic compounds (VOCs) and hazardous air polutants (HAPS are a serioud environmental issue. These pollutants are requlated to protect human health and encourage the development of better control technologies. Current technologies to control thses emissions, until better materials are developed, include destructive and/or recovery-based technologies. Implementation of ads ...

    SBIR Phase I 2005 Environmental Protection Agency
  3. Microfabrication and Micromaching

    SBC: Atometric, Inc.            Topic: N/A

    During Phase 1 Atometric developed and demonstrated principles of a four-axis micro machine. This machine is capable of machining metal parts that are sized within 50mm cube to an accuracy within one micron. Our goal is to develop a micro machine that is applicable to a broad commercial market. Three additional features need to be added to make the machine fully commercially viable. These three fe ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  4. Micro-discharge Based Multi-Metal Emissions Monitoring System

    SBC: Cavition, Inc.            Topic: N/A

    Caviton has developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can b detected and the focus of this Phase II project is to develop a sampling system, carry out laboratory tests, then move to field tests of sampling and analysis. Finall ...

    SBIR Phase II 2005 Environmental Protection Agency
  5. Design and Realization of a Dual Function OCM/MPM for Imaging TEMPS

    SBC: DISTANT FOCUS CORP            Topic: N/A

    Regenerative medicine is an emerging, interdisciplinary field that will result in new engineered medical products. The introduction of a high-resolution, non-destructive imaging technique that is capable of penetrating deeply into the highly-scattering scaffold medium has the means to accelerate the development and commercial utilization of these novel materials. Multi-photon microscopy (MPM) is b ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government