List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Improved Rapid Detection of Viable Waterborne Pathogens

    SBC: INNOVATIVE BIOTECHNOLOGIES INTERNATIONAL            Topic: 05NCERA2

    Innovative Biotechnologies International, Inc., has reported previously a simple method to detect viable Cryptosporidium parvum oocysts in drinking water using the isothermic Nucleic Acid Sequence-Based Amplification (NASBA) method, coupled with a rapid liposome nanovesicle (Nanozome)-based biosensor technology.  This assay system is based on the ability to immunocapture low nu ...

    SBIR Phase I 2006 Environmental Protection Agency
  2. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Paint and Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: 05NCERD9

    Lead in household paint and dust is a serious health hazard, as low-level lead exposure can result in a number of adverse health effects, especially in children. Onsite and real-time detection and quantification of lead in paint/dust are very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as X-ray fluorescenc ...

    SBIR Phase I 2006 Environmental Protection Agency
  3. Accounting for Epistemic and Aleatory Uncertainty in Early System Design

    SBC: Applied Biomathematics Inc            Topic: S207

    The proposed work extends Probability Bounds Analysis to model epistemic and aleatory uncertainty during early design of engineered systems in an Integrated Concurrent Engineering environment. This method uses efficient analytic and semi-analytic calculations, is more rigorous than probabilistic Monte Carlo simulation, and provides comprehensive and (often) best possible bounds on mission-level r ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  4. Multispectral Panoramic Imaging System

    SBC: INTERNATIONAL ELECTRONIC MACHINES CORPORATION            Topic: X103

    International Electronic Machines Corporation, a leader in the design of precision imaging systems, will develop an innovative multispectral, panoramic imaging system for use on exploratory landing craft. During Phase I, IEM will build upon and advance alternative strategies, including our patent pending Synthetic Field of View (SynthFOV) technology and our Pan/Tilt Mirror System (PTMS), initially ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  5. Robust Engineered Thermal Control Material Systems for Crew Exploration Vehicle (CEV) and Prometheus Needs

    SBC: Applied Material Systems Engineering, Inc.(AMSENG)            Topic: X1004

    identified needs for the thermal control and ESD functions of the Prometheus Program's hardware for the heat rejection system for the planned nuclear system. These efforts can also serve uniquely the (CEV) radiator systems needs. The TCMS for the radiators of the both CEV and Prometheus missions need to operate at higher temperatures and provide the space environment stable low ratio of (αs/εT) ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  6. Aerobot Sampling and Handling System

    SBC: Honeybee Robotics, Ltd.            Topic: S402

    Honeybee Robotics proposes to: ?Derive and document the functional and technical requirements for Aerobot surface sampling and sample handling across a range of aerial platforms, mission applications and exploration targets, like Mars and Titan. ?Create a preliminary design for a tether or boom deployed, reusable, low mass & volume surface and subsurface sample acquisition and handling system that ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  7. Highly-Integrated, Reconfigurable, Large-Area, Flexible Radar Antenna Arrays

    SBC: Anvik Corporation            Topic: T301

    Reconfigurable antennas are attractive for remote sensing, surveillance and communications, since they enable changes in operating frequency and / or radiation pattern, resulting in high-bandwidth antenna systems, with broad areas of coverage. Additional functionality would be achieved by integrating: control, processing, and communications directly onto the antenna substrate; MEMS sensors into th ...

    STTR Phase I 2006 National Aeronautics and Space Administration
  8. Rover Radar for Surface Navigation, Hazard Detection and Negative Obstacle Avoidance

    SBC: Epsilon Lambda Electronics Corp.            Topic: X103

    In Topic X1.03 NASA (JPL) is seeking to extend and implement long distance exploratory surface rover missions to gain knowledge of surface topology and roughness. The benefit is to identify suitable sites for future landings of human or robotic missions and to aid in pinpoint landings. High resolution millimeter wave radar sensors provide a low cost, reliable way for a Moon or Mars Rover to dete ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  9. Enabling Technologies for Fabrication of Large Area Flexible Antennas

    SBC: MESOSCRIBE TECHNOLOGIES, INC.            Topic: S206

    MesoScribe Technologies, a high tech start-up from SUNY-Stony Brook, proposes to apply a breakthrough new direct writing technology to meet the objectives set-forth in the NASA SBIR topic S2.06 Advanced Flexible Electronics. This technology is based on revolutionary advances to modern day thermal spray materials processing enables deposition of wide range of electronic materials onto large areas ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  10. Heterojunction Bipolar Transistor Power Amplifiers for Long-Range X-band Communications

    SBC: VEGA WAVE SYSTEMS, INC.            Topic: S803

    In this SBIR Phase I project, Vega Wave Systems, Inc. will develop and demonstrate a novel InGaP-GaAs heterojunction bipolar transistor power amplifier for long-range X-band communications. The Phase I objective is to design and fabricate a new type of heterojunction bipolar transistor in order to achieve high device performance for power amplifiers (PAs). In addition, monolithic power combiners ...

    SBIR Phase I 2006 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government