You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Application of a Uniform Coating Thickness for Complex or Irregular Surfaces

    SBC: CONTEXT FUSION, LLC            Topic: N06063

    Current coating methodologies for geometrically irregular surfaces have become increasing complex and expensive to apply. Yet surfaces exposed to corrosive environments can still suffer the risk of corrosion. While the Navy has invested in edge retentive coating systems, application procedures still require the application of multiple coats due to the challenges inherent in coating complex and ir ...

    SBIR Phase I 2006 Department of DefenseNavy
  2. Critical Precursors for High Rate Rechargeable Batteries

    SBC: T/J Technologies, Inc.            Topic: OSD05MT2

    This Phase I SBIR will develop a foundation for a secure and domestic supply of a reactant critical to the production of large format high-rate rechargeable batteries. In phase I, a variety of precursors and process equipment will be screened and qualified at laboratory scale. The laboratory scale process technology will be transferred to our subcontractor, an established industrial powder proce ...

    SBIR Phase I 2006 Department of DefenseNavy
  3. CMAS mitigation for TBCs using a novel aluminum-phosphate based overlay coating

    SBC: APPLIED THIN FILMS, INC            Topic: N06032

    Applied Thin Films, Inc. proposes to use and an innovative aluminum phosphate solution based coating material to act as a sacrificial barrier layer to protect zirconia thermal barrier coatings from molten CMAS ingress and attack. The proposed coating material, known as Cerablak™, will ideally prevent any decrease in zirconia TBC lifetime expectancy and insulation efficiency due to CMAS infiltra ...

    SBIR Phase I 2006 Department of DefenseNavy
  4. Real Time Wireless Network for Avionics Applications

    SBC: Epsilon Lambda Electronics Corp.            Topic: N05142

    The US Navy has identified the need to develop and demonstrate innovative technologies that leverage existing and emerging commercial real-time wireless circuitry by upconversion of frequency to 60 GHz for short range, high security applications. This topic proposes to gain the advantages of emerging microwave commercial off-the-shelf technology by upconverting to 60 GHz (V-band) where atmospheri ...

    SBIR Phase I 2006 Department of DefenseNavy
  5. Miniaturized Commandable Impulsive Acoustic Source Technology for Multi-Static Anti-Submarine Warfare (ASW)

    SBC: SEALANDAIRE TECHNOLOGIES, INC.            Topic: N06041

    The program objective is to develop innovative miniaturized sensors capable of outputting a single impulsive signal, or multiple smaller impulses, in sequential fashion for the purpose of conducting multi-static ASW missions. Most ASW aircraft utilize A-size (4.875”D x 36”L) sources. While these A-size sources are effective, the weight and volume constraints of the MH-60R helicopter, UAV p ...

    SBIR Phase I 2006 Department of DefenseNavy
  6. 90-degree Fiber Optic Connectors for Condition Base Maintenance

    SBC: TRANSLUME INC            Topic: N06151

    Translume is proposing a novel interconnecting approach that should provide a simple, yet extremely robust and reliable way of attaching single-mode fibers, in tight spaces such as small avionic bays. This approach, which is compatible with environment where explosive vapors are present, can be adapted to create a simple, robust and reliable way of connecting single-mode fibers at 90-degree angle ...

    SBIR Phase I 2006 Department of DefenseNavy
  7. Pier-Side, Bow Sonar Calibration Methodology for Wave Piercing Hull Forms

    SBC: SEALANDAIRE TECHNOLOGIES, INC.            Topic: N06139

    New wave-piercing hull designs and non-cylindrical arrays require a new methodology for calibration of bow sonars. Solutions must be portable and not add any deck fixtures that would increase the radar cross section of the hull. Unfortunately, the optimum separation between the ship sonar and the calibration transducers can be highly variable, depending on the frequencies and beam angles of inte ...

    SBIR Phase I 2006 Department of DefenseNavy
  8. Potable Water Production Module

    SBC: CREATIVE THERMAL SOLUTIONS, INC.            Topic: N06135

    This proposal describes new technology for water purification based on heat pumps, and more specifically based on transcritical CO2 system. Heat pumps in general are excellent thermal transformation tools when both sides (warm and cold) are utilized. Energy efficiency can be extremely high when designed properly. Transcritical CO2 based systems offer even better opportunity due to characteristic ...

    SBIR Phase I 2006 Department of DefenseNavy
  9. Cross-Domain RSS Processor and Router

    SBC: GALOIS, INC.            Topic: N06089

    Galois proposes to develop a Cross-Domain RSS Processor and Router (CDRSS) that will serve as the junction between data sources and network clients at potentially different network sensitivity levels. RSS is one member of a growing family of standard protocols with a simple, fixed schema that enables automated processing. This type of capability will be increasingly important as Web Services ...

    SBIR Phase I 2006 Department of DefenseNavy
  10. New Material Compositions that Expand the Operating Domain of Piezoelectric Single Crystals

    SBC: H. C. Materials Corporation            Topic: N06T034

    At the present time, large-sized PMN-PT piezoelectric crystals, 3" diameter by 8" long, of high quality, can be grown directly from the melt and are commercially available. The objective of this proposal is to demonstrate the feasibility of expanding the operating domain of the PMN-PT based piezoelectric crystals by chemical doping and compositional refinements. Although the piezoelectric properti ...

    STTR Phase I 2006 Department of DefenseNavy
US Flag An Official Website of the United States Government