You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Feasibility of rPET Lignin-Content Polylols for Significant Reduction of Halogenated Flame Retardant in Construction Spray Foam

    SBC: Resinate Materials Group, Inc.            Topic: 17NCER6A

    This EPA SBIR Phase I Research and Development proposal will demonstrate feasibility of reduction in halogenated flame retardant use in polyisocyanurate foams prepared from lignincontent rPET polyols. The study will show whether or not the lignin rPET polyol formulations meet ASTM flame retardancy standards and thus reduce or eliminate the need for halogenated fire retardants (HFRs) in spray foams ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Additive Manufacturing of Made-To-Measure Respiratory Protection Systems

    SBC: AZUL 3D INC            Topic: CBD181001

    CDJ Technologies is an additive manufacturing (AM) company with technology that enables rapid printing over large build volumes. Thisresultant production throughput is differentiating within the AM technology space and enables the adoption of AM technology to addresslimited production-runs. There exist many items where the ability to customize a single component of a system can add substantial val ...

    SBIR Phase I 2018 Department of DefenseOffice for Chemical and Biological Defense
  4. Floor Sensors for Occupancy Counting in Commercial Buildings

    SBC: SCANALYTICS, INC.            Topic: DEFOA0001738

    "The SENSOR FOA clearly identifies a need for people counting in commercial spaces to efficiently allocate HVAC energy, potentially saving 30% in annual energy costs. Scanalytics proposes a materially different, categorically superior floor sensing technology coupled with a device-agnostic platform and real-time processing algorithms to accurately measure occupancy within a space a space such as ...

    SBIR Phase I 2018 Department of EnergyARPA-E
  5. 1200 V SiC Based Extremely Compact, 500 kW, 2000 Hz Inverter for High Speed Permanent Magnet Synchronous Machine (PMSM) Applications

    SBC: Imagen Energy LLC            Topic: DEFOA0001736

    Imagen Energy, LLC, an innovative company which focuses on next generation SiC based power converter system, is teaming up with Wolfspeed, a division of Cree, the leading SiC power module manufacturer in the U.S, and Velicon Inc., a high speed Permanent Magnet Synchronous Machine (PMSM) supplier for special high end applications to resolve a real application issue that exists in the High Speed PMS ...

    SBIR Phase I 2018 Department of EnergyARPA-E
  6. Plastic Oil Bottle Recycling

    SBC: CRI Recycling Services, Inc.            Topic: 05NCERC4

    Various oily wastes are generated when performing vehicle maintenance operations, including used oil drained from the engine, the oil filter, and even oil absorbent used to clean up oil that has spilled on the floor. At one time these wastes were placed in landfills. Concerns with oil from these wastes migrating into surface and groundwater has prompted a number of state and federal ...

    SBIR Phase I 2006 Environmental Protection Agency
  7. Field Analytical Model for Perchlorate

    SBC: IA, Inc.            Topic: 05NCERD4

    Perchlorate is a widely used component of solid fuel, missile and rocket propellants, explosives, and pyrotechnics. It has been shown to reduce iodide uptake into the thyroid gland. The U.S. Environmental Protection Agency (EPA) has found perchlorate contamination in 18 states and believes contamination may exist in as many as 39 states. In early January 2005, the National Academy of Science ...

    SBIR Phase I 2006 Environmental Protection Agency
  8. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Paint and Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: 05NCERD9

    Lead in household paint and dust is a serious health hazard, as low-level lead exposure can result in a number of adverse health effects, especially in children. Onsite and real-time detection and quantification of lead in paint/dust are very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as X-ray fluorescenc ...

    SBIR Phase I 2006 Environmental Protection Agency
  9. Plastic Oil Bottle Recycling

    SBC: CRI Recycling Services, Inc.            Topic: N/A

    Various oily wastes are generated while performing vehicle maintenance operations, including used oil drained from the engine, the oil filter, and even oil absorbent the is used to clean up oil that has spilled on the floor. At one time these wastes were placed in landfills. Concerns with oil from these waste migrating into surface and ground water has prompted a number state and federal regulat ...

    SBIR Phase I 2006 Environmental Protection Agency
  10. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Paint and Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: N/A

    Lead in household paint and dust is a serious health hazard as low level lead exposure can result in a number o adverse health effects, especially in children. On-site and real-time detection and quantification of lead in the paint/dust is very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as x-ray fluorescence ...

    SBIR Phase I 2006 Environmental Protection Agency
US Flag An Official Website of the United States Government