You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High-Power Vertical-Junction Field-Effect Transistors Fabricated on Low-Dislocation-Density GaN by Epitaxial Lift-Off

    SBC: MICROLINK DEVICES INC            Topic: 1

    In this program, we will develop a breakthrough technology that will enable wafer-scale epitaxial lift-off (ELO) of GaN power device heterostructures from low-dislocation-density bulk GaN substrates. This technology will be used to provide a low-cost vertical junction field effect transistors (VJFETs) with high breakdown voltage (greater than 1,200 V) and high current capability (greater than 100 ...

    SBIR Phase I 2013 Department of EnergyARPA-E
  2. High Bandwidth, Compact, Wireless, Millimeter Wave Intra-Missile Datalink

    SBC: Epsilon Lambda Electronics Corp.            Topic: A13053

    The US Army Joint Attack Munitions Systems Program Management Office (JAMS PMO) has, under topic A13-053, presented the following objective: Develop a prototype high bandwidth (>2GB/s) millimeter wave two way data link for intra-missile communications. Proposed herein is a High Bandwidth, Compact, Wireless, Millimeter Wave Intra-Missile Data Link that (1)Has bandwidth>2 Gb/s. (2) Meets reduced ...

    SBIR Phase I 2013 Department of DefenseArmy
  3. Nano-Inspired Broadband Photovoltaics Sheets

    SBC: MICROLINK DEVICES INC            Topic: A13020

    One of the major challenges currently facing the US defense forces is the requirement to meet the electricity demands of individual soldiers in a highly mobile forward operating base. In this Phase I program, we propose to develop and deliver a lightweight, high efficiency, flexible solar sheet for mobile solar applications for Army unmounted soldiers. Based on highly efficient GaAs III-V material ...

    SBIR Phase I 2013 Department of DefenseArmy
  4. Novel Textile for Use on Low Cost Parachutes Employing Trigger Technology to Rapidly Degrade

    SBC: Tex Tech Industries Inc.            Topic: A13047

    Parachutes are a vital technology for moving equipment, ammunition, and other supplies to the battlefield. Cargo parachutes are used to drop military equipment and supplies from aircraft. The U.S. Army currently uses Low Cost Aerial Delivery Systems (LCADS) parachutes for 99% of operational airdrops . These parachutes are made out of a low cost polypropylene material and are considered one-time-us ...

    SBIR Phase I 2013 Department of DefenseArmy
  5. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Paint and Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: 05NCERD9

    Lead in household paint and dust is a serious health hazard, as low-level lead exposure can result in a number of adverse health effects, especially in children. Onsite and real-time detection and quantification of lead in paint/dust are very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as X-ray fluorescenc ...

    SBIR Phase I 2006 Environmental Protection Agency
  6. Simulated Cognitive Leadership Challenges for Professional Forums

    SBC: COMMAND PERFORMANCE RESEARCH, INC.            Topic: OSD05CR2

    Simulated leadership challenges are particularly effective in generating the discussion and interpersonal connections that are the heart of the Army Professional Forum (APF) and the source of its impact. Because asynchronous discussion on immediately relevant topics is critical to forum impact, efforts to enhance simulated leadership challenges must have knowledge sharing and professional conversa ...

    SBIR Phase I 2006 Department of DefenseArmy
  7. Colorimetric Sensors for Chemical and Biological Warfare Agents

    SBC: ANDALYZE, INC.            Topic: A06T024

    We aim to construct litmus paper-like colorimetric sensors for detection and quantification of chemical and biological agents in water by performing combinatorial selection of DNA aptamers for cyanobacteria toxins such as microcystins and saxitoxins. Aptamers are single stranded DNA that can bind target molecules with high affinity and specificity. Such DNA aptamers are biocompatible, biodegradabl ...

    STTR Phase I 2006 Department of DefenseArmy
  8. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Paint and Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: N/A

    Lead in household paint and dust is a serious health hazard as low level lead exposure can result in a number o adverse health effects, especially in children. On-site and real-time detection and quantification of lead in the paint/dust is very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as x-ray fluorescence ...

    SBIR Phase I 2006 Environmental Protection Agency
  9. Rapid Detection Nano-Sensors for Biological Warfare Agents in Buildings and HVAC Systems

    SBC: EPIR TECHNOLOGIES INC            Topic: A06T026

    Currently there is no real-time technology to detect airborne biological warfare agents (BWAs). Conventional technologies require 30 minutes to 1 hour. We propose to design, fabricate and test user-friendly, low-logistical-load biosensors capable of the real-time (~ 30 s. or less) detection and identification of airborne BWAs with high sensitivity and specificity for all classes of bioagents – ...

    STTR Phase I 2006 Department of DefenseArmy
  10. Simulation Tools for Strain Engineering, Manufacturing and Design of Novel Optical and Electronic Superlattice Materials and Surfaces

    SBC: EPIR TECHNOLOGIES INC            Topic: A06075

    The overall objective of this Phase I proposal is to create a model based on molecular dynamics (MD) that can predict the specific Quantum Dot Superlattice (QDSL) heteroepitaxial structures that will grow, given various factors such as growth temperature, flux rate, and spacer thickness. AlGaN/GaN heterostructures have attracted a great deal of theoretical and experimental interest because of thei ...

    SBIR Phase I 2006 Department of DefenseArmy
US Flag An Official Website of the United States Government