You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Innovative improvements to High-Frequency Simulation Methods for Installed Antenna Performance

    SBC: DELCROSS TECHNOLOGIES, LLC            Topic: N103197

    Delcross proposes to systematically validate the Savant and Savant-Hybrid ray tracing solvers for a wide variety of installed antenna configurations, including far-field patterns, near-field distributions, and antenna-to-antenna coupling. Reference benchmarks will be developed from full-wave solvers, measurements, and analytic solutions. When shortcomings in existing methods/algorithms are identif ...

    SBIR Phase II 2011 Department of DefenseNavy
  2. Insert ear-probe assembly for high-quality otoacoustic-emission (OAE) measurements in adults

    SBC: Mimosa Acoustics Inc.            Topic: N10AT032

    OAE has proved to be an important measurement for hearing conservation programs. OAEs are sounds made by healthy inner ears in response to acoustic stimulation and are measured in the ear canal with a miniature microphone. One impediment to OAE testing on a large scale, such as in military hearing conservation programs, is the lack of a high-quality, reliable ear-probes which house the miniature m ...

    STTR Phase II 2011 Department of DefenseNavy
  3. Radio Frequency (RF) System Performance and Electromagnetic Interference (EMI) in Dynamic Environments

    SBC: DELCROSS TECHNOLOGIES, LLC            Topic: N103202

    For manned and unmanned vehicles in current military operating environments, many adversary and civilian platforms exist that can be considered non-traditional, unconventional, or otherwise unaccounted for in the design of these vehicles. These unconventional and nontraditional aircraft, ship, and boat targets pose unique challenges to radar system designers, analysts, and operators. To aid in the ...

    SBIR Phase II 2011 Department of DefenseNavy
  4. Development of Electronic Controlled Fuel Injector and Pump Suitable for 5-20 Horsepower Diesel Cycle Engines

    SBC: KINETIC BEI LLC            Topic: N10AT033

    Phase II will enable KBEI to demonstrate a complete high pressure Micro Injection System on a Navy UAV engine in a laboratory environment. While the Micro Injectors and Micro Pump have been successfully proven at lower pressures, this STTR program has facilitated research and development of a higher pressure injection system designed for use with heavy fuels. At the conclusion of the Phase II ST ...

    STTR Phase II 2011 Department of DefenseNavy
  5. Using Automated Abstractions to Classify System States for Software Health Monitoring

    SBC: Aries Design Automation, LLC            Topic: 9040477

    In most critical software systems, a state that is partially visible through values passed across interfaces contains information that could determine the health of the software system, and whether a failure is likely in the future. Some of this information behaves in a continuous fashion, e.g., the available memory or disk space is easily interpreted to monitor system health. Other values are nom ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  6. A Versatile Microbot Fabrication Platform

    SBC: AMT Nano, LLC            Topic: 9050768R

    AMT Nano, LLC has developed innovative technology for achieving a versatile microrobot platform. The innovation relies on a unique micromolding process, which is low-cost and high-throughput, and high precison. The process achieves versatility by generating deterministic freeform shapes in polymers and nanocomposites. Several perceived benefits accompany the micromolding process. Due to the three- ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  7. Development of a Scalable, Low-Cost, Ultrananocrystalline Diamond Electrochemical Process for the Destruction of Contaminants of Emerging Concern (CECs)

    SBC: Advanced Diamond TechNologies, Inc.            Topic: E

    This Small Business Innovation Research (SBIR) project will develop and ready for commercialization a scalable, low-cost process for purification of water containing Contaminants of Emerging Concern (CECs) using anodic oxidation with boron-doped ultrananocrystalline diamond (UNCD®) thin films. Resent research demonstrated that there is considerable potential for the development of electrochemica ...

    SBIR Phase I 2011 Environmental Protection Agency
  8. L-(+) Lactic Acid Production from Biodiesel Waste Using Pelletized Fungal Fermentation

    SBC: OMNILANE, INC.            Topic: H

    "With the rapid growth of biodiesel industry, the production of crude glycerol as one of major biodiesel byproducts has been dramatically increased. Fully utilizing such a large quantity of crude glycerol is critical to the sustainability of biodiesel industry. Lactic acid is an important industrial chemical that is widely used as a food additive for flavoring and preservative, a moistener in co ...

    SBIR Phase I 2011 Environmental Protection Agency
  9. High Voltage, Lightweight, Conformal, Integrated, Photovoltaic Modules for Unmanned Aerial Vehicles (UAVs)

    SBC: Microlink Devices, Inc.            Topic: N10BT048

    MicroLink proposes a novel device structure which combines ultra-thin, high-efficiency, GaAs-based multijunction solar cells with a novel packaging approach that will result in high flexibility, elastic solar sheets. MicroLink has developed a process that produces ultra-thin, flexible solar cells. In this project, these an array of these flexible solar cells will be incorporated onto an elastic sh ...

    STTR Phase I 2011 Department of DefenseNavy
  10. Safe High Voltage Cathode Materials for Pulsed Power Applications

    SBC: Engi-Mat Co.            Topic: N11AT035

    nGimat & Oak Ridge National Labs jointly propose to develop safe high-voltage cathode materials for pulsed power applications in the military and commercial sectors. nGimat's versatile NanoSpray Combustion process will be utilized to tailor the bulk & surface composition of the cathode materials as well as the particle size & morphology to meet the demanding energy, power and safety requirem ...

    STTR Phase I 2011 Department of DefenseNavy
US Flag An Official Website of the United States Government