You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Decision Support Tools for Sustainable Manufacturing

    SBC: BIMCON Inc.            Topic: 907012R

    Our vision is that of an integrated decision support solution that transforms the current time-consuming and reactive (post-design) sustainability assessment of a product into a proactive approach available in the early design phases. This solution called Sustainability Integrated into Early Design (SIED) will deliver lifecycle sustainability data into early design processes and focus primarily on ...

    SBIR Phase II 2011 Department of CommerceNational Institute of Standards and Technology
  2. Value-Added Use of Milled Mixed-Color Waste Glass As a Supplementary Cementitious Material in Environmentally Friendly and Energy-Efficient Concrete Building Construction

    SBC: Technova Corporation            Topic: N/A

    Production of cement (the binder in concrete) is a highly polluting and energy-intensive process, accounting for about 6% of global, anthropogenic C02 emissions and close to 2% of worldwide primary energy use. This project focuses on partial (~20%) replacement of cement in concrete with milled (mixed-color) waste glass to improve the moisture barrier qualities, durability, dimensional stability an ...

    SBIR Phase II 2011 Environmental Protection Agency
  3. Using Automated Abstractions to Classify System States for Software Health Monitoring

    SBC: Aries Design Automation, LLC            Topic: 9040477

    In most critical software systems, a state that is partially visible through values passed across interfaces contains information that could determine the health of the software system, and whether a failure is likely in the future. Some of this information behaves in a continuous fashion, e.g., the available memory or disk space is easily interpreted to monitor system health. Other values are nom ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  4. A Versatile Microbot Fabrication Platform

    SBC: AMT Nano, LLC            Topic: 9050768R

    AMT Nano, LLC has developed innovative technology for achieving a versatile microrobot platform. The innovation relies on a unique micromolding process, which is low-cost and high-throughput, and high precison. The process achieves versatility by generating deterministic freeform shapes in polymers and nanocomposites. Several perceived benefits accompany the micromolding process. Due to the three- ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  5. An Integrated Decision Support Framework for Sustainability CAE

    SBC: BIMCON Inc.            Topic: 9050273R

    The objective of this proposal is to establish the feasibility of developing an integrated decision support framework that transforms the current time-consuming and reactive (post completion of final design) sustainability assessment into a proactive CAE approach that enables the ability to revise designs based on performance against selected sustainability targets in the product design process, i ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  6. Development of a Scalable, Low-Cost, Ultrananocrystalline Diamond Electrochemical Process for the Destruction of Contaminants of Emerging Concern (CECs)

    SBC: Advanced Diamond TechNologies, Inc.            Topic: E

    This Small Business Innovation Research (SBIR) project will develop and ready for commercialization a scalable, low-cost process for purification of water containing Contaminants of Emerging Concern (CECs) using anodic oxidation with boron-doped ultrananocrystalline diamond (UNCD®) thin films. Resent research demonstrated that there is considerable potential for the development of electrochemica ...

    SBIR Phase I 2011 Environmental Protection Agency
  7. Anaerobic Pre-Treatment for an Algae-based Wastewater Treatment System

    SBC: Algal Scientific Corporation            Topic: F

    "Removing nutrients, such as nitrogen and phosphorus, is an increasingly-important objective of wastewater treatment in order to reduce the impacts of nutrient pollution on waterways. Current technologies to remove these nutrients can be capital intensive, require dangerous chemical inputs and have high operational costs. Our company, Algal Scientific, has developed an innovative nutrient treatm ...

    SBIR Phase I 2011 Environmental Protection Agency
  8. L-(+) Lactic Acid Production from Biodiesel Waste Using Pelletized Fungal Fermentation

    SBC: OMNILANE, INC.            Topic: H

    "With the rapid growth of biodiesel industry, the production of crude glycerol as one of major biodiesel byproducts has been dramatically increased. Fully utilizing such a large quantity of crude glycerol is critical to the sustainability of biodiesel industry. Lactic acid is an important industrial chemical that is widely used as a food additive for flavoring and preservative, a moistener in co ...

    SBIR Phase I 2011 Environmental Protection Agency
US Flag An Official Website of the United States Government