Award Data

Through this NIST SBIR program, Tex Tech Industries is developing furniture and mattress fire blocking materials. Fire barrier methods are necessary to protect furniture and mattresses from fire. In Phase I, Tex Tech used a variety of fibers to make and evaluate fibers for fire barriers. In Phase II, Tex Tech proposed to continue to develop a fire protection barrier from textiles that can potentia ...

The innovation in this Phase II SBIR program is the development of a unique process technology that will enable the realization of a high current InP based photodetector capable of operating at increased optical power densities and with improved reliability. The process technology is an epitaxial lift-off (ELO) process in which the epitaxial material is completely removed from the InP substrate o ...

Quantitative and visually intuitive information is critical to understanding, designing, and verifying the operation of any system. For instance, a vector signal analyzer allows a designer to gain an immediate understanding of a radio communications link by visualizing the transmission signal constellation. Additional analysis such as a calculation of the error vector magnitude can be performed in ...

Coherent light consisting of multiple-frequency combs is commonly used in metrology. Various methods of generating combs exist which are suited for different applications. Mode-locked lasers naturally output a train of phase-locked spectral lines and are a very simple way of generating a comb. These lasers do not operate in the continuous wave regime and the generated comb has very limited flexibi ...

The primary objective of CU Aerospace’s Phase I work will be to assess the feasibility of producing very narrow linewidth (< 1 MHz), single-mode, diode lasers for pumping alkali atoms. This effort will involve novel laser-amplifier diode architecture to enable such high performance devices. These advances will have a major impact on alkali laser based sensor systems as well as rapidly evolving ...

The objective of the proposed project is to demonstrate the feasibility and potential for the realization of III-Nitride based intersubband quantum cascade lasers operating at near room temperature. III-Nitrides have a large band gap and band offset that make then well suited to the realization of short wavelength (1.55 mm) telecommunications lasers. However, in addition to the large band offset ...

This SBIR Phase I project, under topic SB082-052, is directed toward design, epitaxial growth , fabrication and characterization of InGaN solar cells. InGaN thin films grown by solid source molecular beam epitaxy (MBE) will be used to fabricate photonic crystal based high efficiency solar cells. Much more efficient solar cells are possible as a result of photonic crystals that more efficiently ca ...

The proposed project will undertake the research, design, and development of key concepts and technologies for extended duration optical arbitrary waveform generator (OAWG) over large bandwidth, based on a monolithically integrated high-speed optoelectronic chip with a unique integrated ultra-high-resolution super-compact grating (SCG), referred to as SCG based high-speed optical arbitrary wavefor ...

The benefits provided by Belle Aerospace Corporation’s (BAC’s) proposed technology will reduce engine size, weight, acoustic signature, increase reliability and power output, while providing substantial fuel efficiency increases using load following engine control technology and other BAC proprietary innovations. These optimized improvements will provide great reductions in both; the initial l ...

The research objectives of Aiding Complex Decision-Making Through Augmented Reality (SBIR Phase 1) address real world issues found in complex, high-stress, mobile environments that require rich information in order to reduce error and make informed decisions. Such systems are made up of several interacting components requiring collaborative situational awareness in a dynamic environment. Complexit ...