Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Manufacturing Design of Bio-based Ceiling Tiles using Nanocellulose

    SBC: REVOLUTION RESEARCH, INC.            Topic: 15NCER06

    Suspended ceiling tiles are widely used in commercial and residential construction because they offer flexibility and easy access to utilities. Most of the available tiles absorb water, resulting in sagging, staining, and mold/mildew growth. They also contain potentially hazardous chemicals and release airborne fibers when broken or cut. Existing tiles are not durable, requiring frequent replaceme ...

    SBIR Phase I 2016 Environmental Protection Agency
  2. Using Automated Abstractions to Classify System States for Software Health Monitoring

    SBC: Aries Design Automation, LLC            Topic: 9040477

    In most critical software systems, a state that is partially visible through values passed across interfaces contains information that could determine the health of the software system, and whether a failure is likely in the future. Some of this information behaves in a continuous fashion, e.g., the available memory or disk space is easily interpreted to monitor system health. Other values are nom ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  3. Development of a Scalable, Low-Cost, Ultrananocrystalline Diamond Electrochemical Process for the Destruction of Contaminants of Emerging Concern (CECs)

    SBC: Advanced Diamond TechNologies, Inc.            Topic: E

    This Small Business Innovation Research (SBIR) project will develop and ready for commercialization a scalable, low-cost process for purification of water containing Contaminants of Emerging Concern (CECs) using anodic oxidation with boron-doped ultrananocrystalline diamond (UNCD®) thin films. Resent research demonstrated that there is considerable potential for the development of electrochemica ...

    SBIR Phase I 2011 Environmental Protection Agency
  4. L-(+) Lactic Acid Production from Biodiesel Waste Using Pelletized Fungal Fermentation

    SBC: Omnilane, Inc.            Topic: H

    "With the rapid growth of biodiesel industry, the production of crude glycerol as one of major biodiesel byproducts has been dramatically increased. Fully utilizing such a large quantity of crude glycerol is critical to the sustainability of biodiesel industry. Lactic acid is an important industrial chemical that is widely used as a food additive for flavoring and preservative, a moistener in co ...

    SBIR Phase I 2011 Environmental Protection Agency
  5. Microdischarge-Based Multi-Metal Emission Monitoring System

    SBC: Cavition, Inc.            Topic: C3NCERC2

    Caviton, Inc., has developed an ideal microsensor for the continuous monitoring of multiple metals. These detection systems rely on microdischarge technology (patent pending), utilizing the power of emission spectroscopy for parts per billion-level sensitivity and laboratory instrument-level selectivity. Microdischarge sensors provide real-time continuous monitoring of metals (and othe ...

    SBIR Phase I 2004 Environmental Protection Agency
  6. Micro-discharge Based Multi-Metal Emissions Monitoring System

    SBC: Cavition, Inc.            Topic: N/A

    Caviton has developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can b detected and the focus of this Phase II project is to develop a sampling system, carry out laboratory tests, then move to field tests of sampling and analysis. Finall ...

    SBIR Phase I 2004 Environmental Protection Agency
  7. Microfabrication and Micromaching- correct DUN# 142425888

    SBC: Atometric, Inc.            Topic: N/A

    Biotechnology, aerospace, automotive and communications industries need small ultra-precise, three dimensional parts for component miniaturization. Present metal cutting technology is rapidly reaching its limits. A new technology is required to accelerate this trend. Atometric will pursue innovations in ultra-precision multi-axis machine tools. The machining capacity will be within a cube of 50 mm ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government