List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Development of a Scalable, Low-Cost, Ultrananocrystalline Diamond Electrochemical Process for the Destruction of Contaminants of Emerging Concern (CECs)

    SBC: Advanced Diamond TechNologies, Inc.            Topic: E

    This Small Business Innovation Research (SBIR) project will develop and ready for commercialization a scalable, low-cost process for purification of water containing Contaminants of Emerging Concern (CECs) using anodic oxidation with boron-doped ultrananocrystalline diamond (UNCD®) thin films. Resent research demonstrated that there is considerable potential for the development of electrochemica ...

    SBIR Phase I 2011 Environmental Protection Agency
  2. L-(+) Lactic Acid Production from Biodiesel Waste Using Pelletized Fungal Fermentation

    SBC: Omnilane, Inc.            Topic: H

    "With the rapid growth of biodiesel industry, the production of crude glycerol as one of major biodiesel byproducts has been dramatically increased. Fully utilizing such a large quantity of crude glycerol is critical to the sustainability of biodiesel industry. Lactic acid is an important industrial chemical that is widely used as a food additive for flavoring and preservative, a moistener in co ...

    SBIR Phase I 2011 Environmental Protection Agency
  3. High Voltage, Lightweight, Conformal, Integrated, Photovoltaic Modules for Unmanned Aerial Vehicles (UAVs)

    SBC: MicroLink Devices            Topic: N10BT048

    MicroLink proposes a novel device structure which combines ultra-thin, high-efficiency, GaAs-based multijunction solar cells with a novel packaging approach that will result in high flexibility, elastic solar sheets. MicroLink has developed a process that produces ultra-thin, flexible solar cells. In this project, these an array of these flexible solar cells will be incorporated onto an elastic sh ...

    STTR Phase I 2011 Department of DefenseNavy
  4. Insert ear-probe assembly for high-quality otoacoustic-emission (OAE) measurements in adults

    SBC: Mimosa Acoustics Inc.            Topic: N10AT032

    OAE has proved to be an important measurement for hearing conservation programs. OAEs are sounds made by healthy inner ears in response to acoustic stimulation and are measured in the ear canal with a miniature microphone. One impediment to OAE testing on a large scale, such as in military hearing conservation programs, is the lack of a high-quality, reliable ear-probes which house the miniature m ...

    STTR Phase II 2011 Department of DefenseNavy
  5. Development of Electronic Controlled Fuel Injector and Pump Suitable for 5-20 Horsepower Diesel Cycle Engines

    SBC: KINETIC BEI LLC            Topic: N10AT033

    Phase II will enable KBEI to demonstrate a complete high pressure Micro Injection System on a Navy UAV engine in a laboratory environment. While the Micro Injectors and Micro Pump have been successfully proven at lower pressures, this STTR program has facilitated research and development of a higher pressure injection system designed for use with heavy fuels. At the conclusion of the Phase II ST ...

    STTR Phase II 2011 Department of DefenseNavy
  6. High Strength Stress Corrosion Resistant Aluminum Casting Alloys

    SBC: QUESTEK INNOVATIONS LLC            Topic: N102106

    The United States Marine Corps (USMC) is pursuing high-performance aluminum castings for structural components of the Expeditionary Fighting Vehicle (EFV). Aluminum alloy A206 has been considered for these applications; however, this alloy is susceptible to hot tearing during casting, and has inferior stress-corrosion cracking (SCC) resistance. Under this proposed SBIR program, QuesTek Innovations ...

    SBIR Phase I 2011 Department of DefenseNavy
  7. Innovative Capability to Quantify Fatigue Damage and Assessment of Endurance Limit in Spectrum Load Histories

    SBC: QUESTEK INNOVATIONS LLC            Topic: N102113

    Flight-critical components in aircraft and helicopters experience complex service and loading conditions comprising of spectrum (variable amplitude) loading during their lifetime. Due to complex interaction of several life-limiting factors during spectrum loading, particularly, multiple fatigue damage mechanisms and microstructure sensitivity, development of analytical models to accurately predict ...

    SBIR Phase I 2011 Department of DefenseNavy
  8. Direct Digital Manufacturing (DDM) of Metallic Components: Controlled Thermal Processing

    SBC: SCIAKY, INC.            Topic: N102166

    Work proposed for this Phase I involves utilizing existing EBDM technology with newly incorporated closed loop process controls to develop optimized parameters for thermal management of the process intended to improve microstructure and mechanical properties over those previously obtained using high deposition rate parameters.

    SBIR Phase I 2011 Department of DefenseNavy
  9. Innovative improvements to High-Frequency Simulation Methods for Installed Antenna Performance

    SBC: DELCROSS TECHNOLOGIES, LLC            Topic: N103197

    Delcross proposes to systematically validate the Savant and Savant-Hybrid solvers for a wide variety of problems. When shortcomings in existing methods are identified, they will be investigated and revised as necessary to provide good comparison with benchmark solutions. Our approach will first consider canonical problems involving PEC structures that are well understood. We will use Savant and a ...

    SBIR Phase I 2011 Department of DefenseNavy
  10. Radio Frequency (RF) System Performance and Electromagnetic Interference (EMI) in Dynamic Environments

    SBC: DELCROSS TECHNOLOGIES, LLC            Topic: N103202

    Modern military and commercial aircraft include numerous RF systems and associated antennas. The designed freestanding performance of antennas is typically degraded by their platform installation. Also, the cositing of many RF systems in a small region creates enormous opportunity for inter-system EMI via antenna coupling that can significantly harm receiver performance. As challenging as these pr ...

    SBIR Phase I 2011 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government