You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of a Scalable, Low-Cost, Ultrananocrystalline Diamond Electrochemical Process for the Destruction of Contaminants of Emerging Concern (CECs)

    SBC: Advanced Diamond TechNologies, Inc.            Topic: E

    This Small Business Innovation Research (SBIR) project will develop and ready for commercialization a scalable, low-cost process for purification of water containing Contaminants of Emerging Concern (CECs) using anodic oxidation with boron-doped ultrananocrystalline diamond (UNCD®) thin films. Resent research demonstrated that there is considerable potential for the development of electrochemica ...

    SBIR Phase I 2011 Environmental Protection Agency
  2. L-(+) Lactic Acid Production from Biodiesel Waste Using Pelletized Fungal Fermentation

    SBC: OMNILANE INC            Topic: H

    "With the rapid growth of biodiesel industry, the production of crude glycerol as one of major biodiesel byproducts has been dramatically increased. Fully utilizing such a large quantity of crude glycerol is critical to the sustainability of biodiesel industry. Lactic acid is an important industrial chemical that is widely used as a food additive for flavoring and preservative, a moistener in co ...

    SBIR Phase I 2011 Environmental Protection Agency
  3. MBE CdTe on Compliant Substrates for High Performance IRFPAs

    SBC: EPIR TECHNOLOGIES INC            Topic: MDA11T002

    Current state-of-the-art infrared focal plane arrays are based on HgCdTe grown on bulk CdZnTe substrates. The use of Si-based substrates would eliminate a number of drawbacks related to the HgCdTe/CdZnTe system and permit larger formats. We have developed growth protocols that produce material with good crystal quality for such a highly mismatched heteroepitaxial system. Double crystal rocking c ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  4. Defect Passivation for High Performance HgCdTe on Si

    SBC: EPIR TECHNOLOGIES INC            Topic: MDA11T002

    Hydrogen isotopes have been shown to reduce the electrical effects of various semiconductor defects. Specifically, monoatomic hydrogen and deuterium passivate the electrical activity of defects such as dislocations in long-wavelength HgCdTe grown on Si. We propose a novel method of controlling the intake of hydrogen in HgCdTe IRFPAs by using the H2/He plasma afterglow formed by flowing plasma-gene ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  5. Defect Reductions on Si Substrates for HgCdTe MBE Growth

    SBC: SIVANANTHAN LABORATORIES, INC.            Topic: MDA11T002

    Current state-of-the-art infrared focal plane arrays (IRFPAs) are based on HgCdTe material epitaxially grown on bulk CdZnTe substrates. The size of the IRFPAs is limited by the size of the available CdZnTe substrates and the thermal mismatch between CdZnTe and the Si readout circuit, which misaligns the photodiode array with respect to the circuit during heating and cooling cycles. Having HgCdTe ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  6. Front End Opto-Electronics for Future Radio Communications

    SBC: MICROLINK DEVICES INC            Topic: ST081013

    The innovation in this Phase II SBIR program is the development of a unique process technology that will enable the realization of a high current InP based photodetector capable of operating at increased optical power densities and with improved reliability. The process technology is an epitaxial lift-off (ELO) process in which the epitaxial material is completely removed from the InP substrate o ...

    STTR Phase II 2011 Department of DefenseDefense Advanced Research Projects Agency
  7. Feasibility of Long Wavelength Infrared Focal Plane Arrays Based on Type-II Superlattice Minority Electron Unipolar Architecture

    SBC: MP Technologies, LLC            Topic: MDA10009

    Recent development of Antimonide-based Type-II superlattice infrared detectors has resulted in significant breakthroughs in terms of device performance as well as FPA imaging quality. Improvement in material quality and processing technique, as well as evolutionary modifications in device architecture have demonstrated the advantages of the material system over alternatives, and proven it as a via ...

    SBIR Phase I 2011 Department of DefenseMissile Defense Agency
  8. Ultrasensitive and Compact Superluminal Ring Laser Accelerometer for Inertial Navigation

    SBC: DIGITAL OPTICS TECHNOLOGIES INC            Topic: MDA10011

    For many applications, there is a need for developing inertial measurement units (IMU), employing gyroscopes and accelerometers, with better accuracy and/or smaller volume and weight. Currently, in partnership with others, we at Digital Optics Technologies (DOT) have been developing a superluminal ring laser gyroscope (SRLG) that can improve the accuracy of rotation sensing by nearly five orders ...

    SBIR Phase I 2011 Department of DefenseMissile Defense Agency
  9. Development of Type-II Superlattices for Two-Color Focal Plane Arrays

    SBC: MP Technologies, LLC            Topic: MDA10012

    High performance single-band focal plane arrays (FPAs) are sometimes unable to discriminate a target from its background when they present similar infrared radiation at a given wavelength which may occur even if the temperatures of the objects are different. Two-Color FPAs offer an additional wavelength that allows easy identification in such cases. Large-format dual-band FPAs are highly needed f ...

    SBIR Phase I 2011 Department of DefenseMissile Defense Agency
  10. Composite DACS Nozzle for Next Generation Interceptor

    SBC: Fiber Materials, Inc.            Topic: MDA10013

    Fiber Materials Inc. (FMI) has developed and delivered carbon fiber reinforced silicon carbide (C-SiC) composite nozzles and thrust chambers for solid and liquid/gel fueled divert and attitude control systems (DACS) to Aerojet. The C-SiC material system has been validated with 3700 degrees F solid propellant. The proposed program will address identified barriers to transition of the material sys ...

    SBIR Phase I 2011 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government