You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of Native Kelp Culture System Technologies to Support Sea Vegetable Aquaculture in New England Coastal Waters

    SBC: OCEAN APPROVED, INC.            Topic: 817

    This Phase II research expands Phase I research on Saccharina latissima and is to design and develop “seed” nursery methodologies for the development of commercial-scale production of juvenile kelp plants including Alaria esculenta and Laminaria digitata. The project objectives include: 1. Isolate and maintain cultures of New England species of Alaria esculenta and laminaria digitata to be use ...

    SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  2. Using Automated Abstractions to Classify System States for Software Health Monitoring

    SBC: ARIES DESIGN AUTOMATION, LLC            Topic: 9040477

    In most critical software systems, a state that is partially visible through values passed across interfaces contains information that could determine the health of the software system, and whether a failure is likely in the future. Some of this information behaves in a continuous fashion, e.g., the available memory or disk space is easily interpreted to monitor system health. Other values are nom ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  3. A Versatile Microbot Fabrication Platform

    SBC: AMT Nano, LLC            Topic: 9050768R

    AMT Nano, LLC has developed innovative technology for achieving a versatile microrobot platform. The innovation relies on a unique micromolding process, which is low-cost and high-throughput, and high precison. The process achieves versatility by generating deterministic freeform shapes in polymers and nanocomposites. Several perceived benefits accompany the micromolding process. Due to the three- ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  4. Functional Chrome Coatings on Hard to Access, Internal Surfaces of Industrial Parts from an Environmentally Benign Trivalent Chromium Bath

    SBC: Faraday Technology, Inc.            Topic: B

    "Faraday Technology, Inc., with the guidance of our commercialization partner the Boeing Company, propose a drop-in-replacement chrome plating process that can coat complex, hard to access surfaces such as the interior of landing gear, using an environmentally benign trivalent chromium bath. The proposed green manufacturing process meets the stated EPA need by improving existing processes while u ...

    SBIR Phase I 2011 Environmental Protection Agency
  5. Development of a Scalable, Low-Cost, Ultrananocrystalline Diamond Electrochemical Process for the Destruction of Contaminants of Emerging Concern (CECs)

    SBC: Advanced Diamond TechNologies, Inc.            Topic: E

    This Small Business Innovation Research (SBIR) project will develop and ready for commercialization a scalable, low-cost process for purification of water containing Contaminants of Emerging Concern (CECs) using anodic oxidation with boron-doped ultrananocrystalline diamond (UNCD®) thin films. Resent research demonstrated that there is considerable potential for the development of electrochemica ...

    SBIR Phase I 2011 Environmental Protection Agency
  6. Full Scale Anemometer

    SBC: SKY SIGHT TECHNOLOGIES, LLC            Topic: G

    "The ability to determine air pollutant emission quantity and emission rate are extremely important for environmental protection, policy making, and law enforcement. A pollutant emission rate can be determined by calculating the product of the airflow rate from an exhaust fan and the composition of the pollutant in the air. The pollutant may be any number of things, including particulate matters ...

    SBIR Phase I 2011 Environmental Protection Agency
  7. L-(+) Lactic Acid Production from Biodiesel Waste Using Pelletized Fungal Fermentation

    SBC: OMNILANE INC            Topic: H

    "With the rapid growth of biodiesel industry, the production of crude glycerol as one of major biodiesel byproducts has been dramatically increased. Fully utilizing such a large quantity of crude glycerol is critical to the sustainability of biodiesel industry. Lactic acid is an important industrial chemical that is widely used as a food additive for flavoring and preservative, a moistener in co ...

    SBIR Phase I 2011 Environmental Protection Agency
  8. Automated Sample Collection and Concentration System for Multiple Pathogens in Water

    SBC: SCIENTIFIC METHODS INC            Topic: 06NCERP1

    The goal of this research project is to develop a simple, rapid, and highly automated sample collection system that will concentrate a broad range of pathogens simultaneously. The system will integrate continuous flow centrifugation (CFC) with an innovative positively charged filter so that large (i.e., protozoan parasites and bacteria) and small (i.e., enteric viruses) bioparticles can be co ...

    SBIR Phase II 2007 Environmental Protection Agency
  9. Enabling Electrostatic Painting of Automotive Polymers with Low Cost Carbon Nanofibers

    SBC: Applied Sciences Inc.            Topic: 06NCERP1

    Applied Sciences, Inc. (ASI) investigated the use of inexpensive carbon nanofiber (CNF) to impart electrical conductivity to polymer systems to allow the use of electrostatic painting (ESP) techniques to paint these polymers in the same manner as metals without the need for a solvent- based primer coat. The production of polymer composites that can be electrostatically painted with no additional p ...

    SBIR Phase II 2007 Environmental Protection Agency
  10. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: 06NCERP1

    Lead in household paint and dust is a serious health hazard, as low-level lead exposure can result in a number of adverse health effects, especially in children. Onsite and real-time detection and quantification of lead in paint/dust are very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as X-ray fluorescence inst ...

    SBIR Phase II 2007 Environmental Protection Agency
US Flag An Official Website of the United States Government