Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Functional Chrome Coatings on Hard to Access, Internal Surfaces of Industrial Parts from an Environmentally Benign Trivalent Chromium Bath

    SBC: Faraday Technology, Inc.            Topic: B

    "Faraday Technology, Inc., with the guidance of our commercialization partner the Boeing Company, propose a drop-in-replacement chrome plating process that can coat complex, hard to access surfaces such as the interior of landing gear, using an environmentally benign trivalent chromium bath. The proposed green manufacturing process meets the stated EPA need by improving existing processes while u ...

    SBIR Phase I 2011 Environmental Protection Agency
  2. Development of a Scalable, Low-Cost, Ultrananocrystalline Diamond Electrochemical Process for the Destruction of Contaminants of Emerging Concern (CECs)

    SBC: Advanced Diamond TechNologies, Inc.            Topic: E

    This Small Business Innovation Research (SBIR) project will develop and ready for commercialization a scalable, low-cost process for purification of water containing Contaminants of Emerging Concern (CECs) using anodic oxidation with boron-doped ultrananocrystalline diamond (UNCD®) thin films. Resent research demonstrated that there is considerable potential for the development of electrochemica ...

    SBIR Phase I 2011 Environmental Protection Agency
  3. L-(+) Lactic Acid Production from Biodiesel Waste Using Pelletized Fungal Fermentation

    SBC: Omnilane, Inc.            Topic: H

    "With the rapid growth of biodiesel industry, the production of crude glycerol as one of major biodiesel byproducts has been dramatically increased. Fully utilizing such a large quantity of crude glycerol is critical to the sustainability of biodiesel industry. Lactic acid is an important industrial chemical that is widely used as a food additive for flavoring and preservative, a moistener in co ...

    SBIR Phase I 2011 Environmental Protection Agency
  4. Smoke and Flame Resistant Large Core Plastic Optical Fiber for Highly Efficient Light Distribution in Navy Vessels

    SBC: Energy Focus, Inc.            Topic: SB052003

    The technical problem being addressed in this work is the material selection and development of fabrication processes that will yield a scalable large core plastic optical fiber product that meets the specific flame, smoke, fume and toxicity requirements for use on board US Navy ships. Use of the fire retardant fibers coupled with efficient fiber optic light distribution systems will enable the ...

    SBIR Phase II 2007 Department of DefenseDefense Advanced Research Projects Agency
  5. Light-Activated Shape Memory Composite

    SBC: Cornerstone Research Group, Incorporated            Topic: ST061007

    Future systems such as morphing aircraft will adapt and reconfigure to accommodate mission needs. These shape changes must allow change while still bearing substantial loads. Fiber-reinforced composites are the preferred reinforcement materials due to their mechanical and lightweight properties suited for meeting the requirements of morphing systems. Although thermally activated shape memory comp ...

    STTR Phase II 2007 Department of DefenseDefense Advanced Research Projects Agency
  6. Arc Source Multi-Layer Coatings to Doublelighting System Lifetimes without Affecting Performance

    SBC: Energy Focus, Inc.            Topic: SB052004

    We will determine how to effectively apply an organometallic external barrier coating to arc tubes to prevent or delay their failure by devitrification. The most important consideration is source life, followed by lumen maintenance, the spectral output and cost. The coating process will be the Microdyne system demonstrated in Phase I. The alternate processes of CLCB and dip-coating will be investi ...

    SBIR Phase II 2007 Department of DefenseDefense Advanced Research Projects Agency
  7. Enabling Electrostatic Painting of Automotive Polymers with Low Cost Carbon Nanofibers

    SBC: Applied Sciences            Topic: 06NCERP1

    Applied Sciences, Inc. (ASI) investigated the use of inexpensive carbon nanofiber (CNF) to impart electrical conductivity to polymer systems to allow the use of electrostatic painting (ESP) techniques to paint these polymers in the same manner as metals without the need for a solvent- based primer coat. The production of polymer composites that can be electrostatically painted with no additional p ...

    SBIR Phase II 2007 Environmental Protection Agency
  8. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: 06NCERP1

    Lead in household paint and dust is a serious health hazard, as low-level lead exposure can result in a number of adverse health effects, especially in children. Onsite and real-time detection and quantification of lead in paint/dust are very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as X-ray fluorescence inst ...

    SBIR Phase II 2007 Environmental Protection Agency
  9. Human-Machine Interfaces for Coordination Decision Support in Tactical Settings

    SBC: JXT Applications, Inc.            Topic: ST051002

    Mobile Army commanders must frequently adjust their planned course of action (COA) in response to events and changes in the battlespace. Advances in the battlefield information infrastructure and related technologies provide new opportunities for the development of human-machine collaborative systems to support decision-making in this context. The objective of this effort is to develop a prototy ...

    STTR Phase II 2007 Department of DefenseDefense Advanced Research Projects Agency
  10. Photovoltaic Cells for Very High Altitude Very Long Endurance Solar Aircraft

    SBC: MicroLink Devices            Topic: SB072043

    The significance of the innovation in this Phase I SBIR is the development of a technology which will enable the manufacture of a light weight, low cost cost , multi-band gap compound semiconductor material containing high efficiency compound semiconductor multijunction solar cells suitable for deployment for in very high altitude, very long endurance (HALE) solar solar aircraft. This will be ac ...

    SBIR Phase I 2007 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government