You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
High-Power Vertical-Junction Field-Effect Transistors Fabricated on Low-Dislocation-Density GaN by Epitaxial Lift-Off
SBC: MICROLINK DEVICES INC Topic: DEFOA0000941"In this program, we will develop a breakthrough technology that will enable wafer-scale epitaxial lift-off (ELO) of GaN power device heterostructures from low-dislocation-density bulk GaN substrates. This technology will be used to provide a low-cost vertical junction field effect transistors (VJFETs) with high breakdown voltage (greater than 1,200 V) and high current capability (greater than 100 ...
SBIR Phase II 2013 Department of EnergyARPA-E -
High-Power Vertical-Junction Field-Effect Transistors Fabricated on Low-Dislocation-Density GaN by Epitaxial Lift-Off
SBC: MICROLINK DEVICES INC Topic: 1In this program, we will develop a breakthrough technology that will enable wafer-scale epitaxial lift-off (ELO) of GaN power device heterostructures from low-dislocation-density bulk GaN substrates. This technology will be used to provide a low-cost vertical junction field effect transistors (VJFETs) with high breakdown voltage (greater than 1,200 V) and high current capability (greater than 100 ...
SBIR Phase I 2013 Department of EnergyARPA-E -
Ultra-Wide Continuous Wave Electrical Tuning with a Multi-Section Quantum Cascade Laser
SBC: MP Technologies, LLC Topic: N121032Infrared countermeasure and standoff chemical detection applications require a light source with high power output, good beam quality, and a wide tuning range. There are a limited number of viable mid-infrared (3-5 micron wavelength) solutions that can provide these features in a compact and power scalable architecture. In this proposal, a single chip solution is given which promises high power ou ...
SBIR Phase II 2013 Department of DefenseNavy -
Affordable CMAS-Resistant Thermal Barrier Coatings
SBC: QUESTEK INNOVATIONS LLC Topic: N12AT019In this STTR program, QuesTek Innovations LLC, a leader in the field of computational materials design, proposes to expand its computational Materials by Design technology by developing a thermodynamics-based design toolkit that enables the subsequent design and development of novel calcium-magnesium-alumino-silicate (CMAS)-resistant, high performance thermal barrier coatings (TBCs) for aeroengine ...
STTR Phase II 2013 Department of DefenseNavy -
Computational Design and Development of Advanced Stainless Steel for Aircraft Engine and Lift Fan Gearbox Bearings
SBC: QUESTEK INNOVATIONS LLC Topic: N121022The overall goal of the Phase II program is to move QuesTeks new stainless bearing steel alloy development efforts from the Phase I prototype scale, to intermediate- and full-scale alloy production. The Phase II program will culminate with a demonstration of the new alloys properties at full (production) scale, with data suitable for alloy qualification and specification development.
SBIR Phase II 2013 Department of DefenseNavy -
Ultra-Low-RF-Power Ultra-Wide-RF-Bandwidth High-Optical-Power Low-Loss Wide-Temperature Semiconductor Electro-Optic Modulators based on Silicon-Photon
SBC: Optonet, Inc Topic: N13AT005The proposed project will undertake the research, design, and development of key concepts and technologies for a very-low-voltage high-speed semiconductor electro-optic modulator. Low-voltage high-speed optical intensity modulators with voltage 100GHz, and low optical loss
STTR Phase I 2013 Department of DefenseNavy -
Ring-Cavity Surface-Emitting Quantum Cascade Lasers for High Power Applications at 4.5 um
SBC: MP Technologies, LLC Topic: N13AT006Surface emitting semiconductor lasers eliminate the necessity for facet cleaving and allow for wafer scale testing, which increase the manufacturing yield and reduces the cost. However, in the mid-infrared, surface emitting semiconductor lasers are significantly underdeveloped compared to edge emitting devices. The proposed research will investigate the feasibility of using ring-cavity surface-emi ...
STTR Phase I 2013 Department of DefenseNavy -
Fuel Efficient Forward Operating Base (FOB)
SBC: Marine Design Dynamics, Inc. Topic: N103193The objective of this project is to develop a software based FOB energy simulation model that will enable the USMC to effectively analyze FOB energy efficiency under various configurations and assess the impacts of current and emerging conventional and alternative power systems. At the end of Phase II, MDD will have developed a comprehensive energy simulation and analysis tool, with the following ...
SBIR Phase II 2013 Department of DefenseNavy -
A 10 Kilowatt, Rankin Cycle Agricultural Waste to Energy Conversion Module Utilizing Ultra Micro Turbo-Alternators
SBC: Fluidic microControls, Inc. Topic: HIn 2011, there were 60,000 dairy farms in the US. Of there, 56,600 had herds of fewer than 500 animals. Currently, manure digester installations are only considered economical for herds of at least 500 animals. There require turbine or diesel generator sets of 100 Kilowatt size and larger. The need exists for a smaller waste to energy conversion approach for implementation on small farms were ...
SBIR Phase II 2013 Environmental Protection Agency -
High Load Roller Bearing (HLRB)
SBC: HY-TEK MANUFACTURING CO., INC. Topic: N111047HMCs approach to Phase I HLRB roller bearing design was to achieve separation of the radial and axial functions of the bearing so as to enable axial bearing movement independent of bearing rotation. HMCs rationale for this approach was that the delineation of axial and radial loads will ensure that each load bearing member can withstand the static and dynamic force vectors to which it will be expo ...
SBIR Phase II 2013 Department of DefenseNavy