List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Water Purification using TiO2 and Novel Activation Method

    SBC: Imaging Systems Technology, Inc.            Topic: A

    Under this Phase II SBIR, Imaging Systems Technology (IST) will optimize and scale up its UV Plasma- shells with Titanium (IV) Dioxide (TiO2) system to produce a low cost, rugged, lightweight, and highly efficient and versatile water purification system. Plasma-shells are tiny hollow gas encapsulating devices ranging in size from 400 microns to 8.00 mm. Under the EPA Phase I SBIR, IST has successf ...

    SBIR Phase II 2014 Environmental Protection Agency
  2. Low Cost, Efficient Microchannel Plasma Ozone System for Point of Use Water Treatment

    SBC: EP Purification, Inc.            Topic: A

    A team at EP Purification has performed research for the development and commercialization of low-cost microchannel plasma reactor modules capable of efficiently producing ozone for water treatment and other environmental applications in a slim form factor and size. The conservation of water resources for human consumption is a growing national priority. Ozone is a unique purification agent as it ...

    SBIR Phase II 2014 Environmental Protection Agency
  3. Development of Zinc Coatings on Steel by Cermaclad(TM) to Replace Pickling Lines

    SBC: MesoCoat            Topic: B

    Every year, a significant amount of money is lost due to atmospheric attack of steel parts. A convenient and effective way for corrosion protection is coating the unalloyed steel with a thin layer of zinc (Zn) metal by galvanizing. Pickling is an essential step of this process to ensure a high-quality surface of steel for further processing. In this process, acid is used to remove scale from the s ...

    SBIR Phase I 2014 Environmental Protection Agency
  4. Phosphorus Removal and Recovery From Municipal Wastewater Using Nano-Enhanced Media

    SBC: METAMATERIA TECHNOLOGIES, LLC            Topic: A

    This Small Business Innovation Research (SBIR) Phase I project will develop approaches for the capture and recovery of phosphorus in municipal reclamation facilities processing under I MGD using an innovative nanostructured sorption media. The captured phosphorous will be recovered from the media by a simple treatment and will be converted to a useful material.Eutrophication is a process in which ...

    SBIR Phase I 2014 Environmental Protection Agency
  5. Development of a Portable Microwave Atomic Clock Using Pulsed Coherent Population Trapping

    SBC: Digital Optics Technologies, Inc.            Topic: SB141004

    We propose to develop a low SWaP, portable microwave Rb-87 cold atomic clock using pulsed coherent population trapping (CPT). The SWaP goal is to achieve a volume of

    SBIR Phase I 2014 Department of DefenseDefense Advanced Research Projects Agency
  6. A Low-Cost, High-Performance Colloidal Quantum Dot MWIR Focal Plane Array

    SBC: SIVANANTHAN LABORATORIES, INC.            Topic: ST13B002

    The primary goal of this proposed effort is to develop mid-wavelength infrared (MWIR) colloidal quantum dot (CQD)-based focal plane arrays (FPAs) to significantly reduce the cost of MWIR photon imagers. In order to realize this goal, it will first be nec

    STTR Phase I 2014 Department of DefenseDefense Advanced Research Projects Agency
  7. Efficient Quantum Frequency Conversion for Advanced Optical Communications

    SBC: Srico Inc            Topic: SB133001

    SRICO proposes to develop novel and practical methods to produce a flexible, robust and highly efficient, low-loss quantum frequency conversion device based on periodically poled lithium niobate (PPLN). The focus of the program will be to optimize the device design and operating parameters to achieve less than 1.5 dB end-to-end loss while maintaining nearly 100% conversion efficiency and reducing ...

    SBIR Phase I 2014 Department of DefenseDefense Advanced Research Projects Agency
  8. Processing of High-Strength Thick C-C Composite Structures using a One-Step Process

    SBC: WRIGHT MATERIALS RESEARCH CO.            Topic: SB133005

    Some aerospace vehicles components require structural materials with temperature stability near or above 3000?F. Carbon-carbon (C-C) composites are prime materials for these applications because of their unique properties. Current C-C composites fabrication techniques are very expensive and time consuming. They usually require multiple infiltration and carbonization at high temperatures. Thick ...

    SBIR Phase I 2014 Department of DefenseDefense Advanced Research Projects Agency
  9. Adhesive Bond Strength of Bonded Structures in Confined Locations

    SBC: LSP Technologies, Inc.            Topic: SB123001

    Aerospace manufacturers are using composite structures in aircraft and they are the future of aviation. Composites reduce weight and maintenance costs. Today, many composite structures are joined together with fasteners. However to meet future design r

    SBIR Phase II 2014 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government