List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Chemical Microsensors and Instrumentation for Continuous Monitoring and Control of Mercury Emissions

    SBC: Senova Corp.(chemalert)            Topic: N/A

    This project addresses the national need to continuously monitor and control mercury emission from industrial, municipal and energy-production sources. The proposed development of novel chemical microsensors and instrumentation have a unique combination of advantages to satisfy this need. The small sample size required by the microsensors in these instruments will both prolong their useful lifet ...

    SBIR Phase II 1995 Environmental Protection Agency
  2. NANOPOROUS FILTERS FOR SIMULTANEOUS REMOVAL OF VOC AND PARTICULATES FROM AIR

    SBC: Nanomaterials Research LLC            Topic: N/A

    Indoor air in work places, automobiles, recreation settings and homes is one ofthe major sources of direct human exposure to particulates, chemicals and diseasecausing bacteria. Recent estimates suggest that more than 98% of theseparticulate pollutants are very small (less than 1 ) and, therefore, cannot beeffectively filtered by exiting filters. These particulates are also know to becarriers o ...

    SBIR Phase I 1995 Environmental Protection Agency
  3. Composite Reinforcing Fiber and Interfacial Coating Process

    SBC: Sensintel Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  4. Melt-Drawung and Coating of Oxide Fibers for Composite Materials Applications

    SBC: Containerless Research, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  5. Portable Ultra-High Sensitivity Gas Sensors for Exhaust Plume Monitoring

    SBC: Innovative Lasers Co            Topic: N/A

    Portable, ultra-high sensitivity gas sensors for the detection of combustion products in plumes are urgently needed to accelerate efforts to reduce the environmental impact of combustion processes in both military and civilian applications. Innovative Lasers Corporation (ILC) proposes to develop a portable, light-weight gas sensor based on intracavity laser spectroscopy (ILS) with the ultra-high ...

    SBIR Phase I 1995 Department of DefenseAir Force
  6. High Temperature Structural Materials for Advanced Air Force Systems

    SBC: ATS-MER, LLC            Topic: N/A

    Conventional composite processing techniques are presently unable to fabricate Al1O3-fiber reinforced y-titanium aluminide matrix composites based on low cost, small diameter ( 5-20um) fibers. The primary problem is one of infiltration of the matrix in between the fibers without any degradation in fiber properties. Although pressure casting would be a low cost processing approach, the severe che ...

    SBIR Phase I 1995 Department of DefenseAir Force
  7. Heavy Metal Recovery from Industrial Wastewater Using Nanostructured Photocatalysts

    SBC: Nanomaterials Research LLC            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  8. Wide Angle Night Vision Visor System (Concept XII)

    SBC: Night Vision Corp            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  9. Digital Signal Processing Radiometer For The Investigation of Background Noise Stationarity

    SBC: Rincon Research Corporation            Topic: N/A

    Design of a novel digital signal processing (DSP) radiometer system is proposed, which combines a low-noise, high stability radio frequency (RF) down-converter, a high speed digitizer with a deep buffer memory, and a personal computer running an innovative DSP software known as X-Midas. X-Midas allows the user to construct a software DSP system by selecting functional blocks through a user-friend ...

    SBIR Phase I 1995 Department of DefenseAir Force
  10. Ultra High Surface Area Microlaminate Aluminum Powder for High and Low Energy Explosives

    SBC: SIGMA TECHNOLOGIES INTERNATIONAL GROUP, INC.            Topic: N/A

    Metal additives to explosive formulations are commonly used in high energy military and commercial explosives, solid fuel rocket propellants and military and commercial pyrotechnics. Aluminum metal is a stable low cost fuel that is typically used in the form of powder or flake. In high energy systems the energy of the balst and the velocity of the detonation wavefront can be limited by the utiliza ...

    SBIR Phase II 1995 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government