You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Component Optimization for Improved Refrigerant Recovery

    SBC: Optimized Thermal Systems, Inc.            Topic: 2E

    Refrigerants are known to have harmful impacts on the environment. It is essential that those that are particularly harmful with a high global warming potential (GWP) are recovered correctly for proper recycling or disposal. Unfortunately, all too often, refrigerant is not properly recovered either due to system failure, technician error, or unincentivized industry practice. With implementation of ...

    SBIR Phase I 2023 Environmental Protection Agency
  2. High Entropy TPS Materials

    SBC: ADVANCED CERAMICS MANUFACTURING, LLC            Topic: DLA23A003

    Hypersonic aerial vehicles have tailored aerodynamic shapes with sharp leading edges to maximize performance. When a vehicle is travelling through the atmosphere at hypersonic speeds of Mach 5 or higher, it encounters intense friction with the surrounding air. The nose cone and the leading edges of the flight vehicle will experience extremely high temperatures from 3000°F to 5000°F. Ultra-High T ...

    STTR Phase I 2023 Department of DefenseDefense Logistics Agency
  3. Heterogeneous mm-wave GaN Heterojunction Bipolar Transistor

    SBC: Quanttera LLC            Topic: 1

    NIST Advanced Communications and Communications Technology Laboratory/RF Technology Division's focus area is on the next-generation wireless systems and recognizes the importance of mm‐wave communications for “key enabling technologies for 5G and beyond, including millimeter‐wave.” In response to this NIST CTL technology research program, the SBIR Phase I project will develop a high‐perf ...

    SBIR Phase I 2023 Department of CommerceNational Institute of Standards and Technology
  4. Analytical Quality Management for 3D-Printed Small Molecule Drugs

    SBC: INFRATRAC INC            Topic: 2

    The promise of personalized medicine can be realized in part via point-of-care 3D drug printing, but only if there are reliable quality measures available. Children and seniors may need custom or easy-to-swallow doses, a need now addressed only in a limited way by ad-hoc in-pharmacy compounding. Compliance-targeted enhancements such as flavor and shape choices are particularly important for childr ...

    SBIR Phase II 2023 Department of CommerceNational Institute of Standards and Technology
  5. Qualification of Aircraft Accelerometer NSN 6610-00-151-6684 & Torque Motor NSN 6105-01-326-8652

    SBC: Kaney Aerospace, Inc.            Topic: DLA213001

    The objective of this Phase II SBIR proposal is to continue the design and qualification efforts for a single-axis accelerometer (NSN 6610-00-151-6684) and perform detailed design and qualification activities for a Torque Motor (NSN 6105-01-326-8652). During Phase II, Kaney will utilize in-house manufacturing and analysis capabilities to produce drawings and manufacturing/qualification plans for t ...

    SBIR Phase II 2023 Department of DefenseDefense Logistics Agency
  6. Source Approval Request (SAR) Package and Development Plan for Battery Connector Assembly NSN 6150-01-629-3728

    SBC: Kaney Aerospace, Inc.            Topic: DLA231001

    Kaney Inc. (Kaney) proposes development of a SAR package and development plan for National Stock Number (NSN) 6150-01-629-3728, a Battery Connector Assembly. This battery connector assembly is out of stock at two different suppliers (but available at a third supplier, please see below in Figure 6-1), and the NSN pertains to F-15C and F-15D based platforms including variants currently flown by some ...

    SBIR Phase I 2023 Department of DefenseDefense Logistics Agency
  7. Source Approval Request (SAR) Package and Development Plan for Radio Cable Assembly NSN 5995-11-959-918

    SBC: Kaney Aerospace, Inc.            Topic: DLA231001

    Kaney Inc. (Kaney) proposes development of a SAR package and development plan for National Stock Number (NSN) 5995-01-195-9918, a Radio Cable Assembly for the B-1 platform. During Phase I, Kaney will utilize our in-house manufacturing and analysis capabilities to develop Kaney drawings and a manufacturing/qualification plan for this part. Kaney has extensive domain knowledge and capabilities rela ...

    SBIR Phase I 2023 Department of DefenseDefense Logistics Agency
  8. Source Approval Request (SAR) Package and Development Plan for Generator Rack NSN 6110-10-733-343

    SBC: Kaney Aerospace, Inc.            Topic: DLA231001

    Kaney Inc. (Kaney) proposes development of a SAR package and development plan for National Stock Number (NSN) 6110-01-073-3343, a Generator Rack for the C-130 platform. During Phase I, Kaney will utilize our in-house manufacturing and analysis capabilities to develop Kaney drawings and a manufacturing/qualification plan for this part. Kaney has extensive domain knowledge and capabilities related ...

    SBIR Phase I 2023 Department of DefenseDefense Logistics Agency
  9. REPLACING PLASTIC WITH BIODEGRADABLE PACKGING IN FOOD SERVICE

    SBC: Biomass Energy Systems, Inc.            Topic: DLA211003

    This proposal follows the DLA SBIR Phase 1 Contract SP4701-21-P-0075. It seeks resources to move to Phase 2 so that the lessons learned and data developed in Phase 1 will further expand on the solution, including the field demonstration for replacing the plastic packaging in food service with the biodegradable Cellulosic Bio-Polymer (CBP) packaging to address military needs. Phase 1 was a great le ...

    SBIR Phase II 2023 Department of DefenseDefense Logistics Agency
  10. High Temperature Ceramic Insulation Thermal Protection Systems for Hypersonic Weapons

    SBC: ADVANCED CERAMICS MANUFACTURING, LLC            Topic: DLA222007

    There is a clear need for a reliable U.S. source of low-cost, ultra-high temperature ceramic (UHTC) insulation for use in hypersonic weapons that can protect internal heat sensitive components. ACM has developed high porosity, ultrahigh temperature ceramic (UHTC) foams with super low thermal conductivity using a scalable manufacturing process that produces near-net-shape, rigid/flexible insulation ...

    SBIR Phase II 2023 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government