You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Low Cost Carbon Fluoride Active Materials for BA-5790/U Lithium Batteries

    SBC: AMERICAN ENERGY TECHNOLOGIES COMPANY            Topic: DLA152001

    American Energy Technologies Co. will partner with Eagle Picher Technologies and Alion Science & Technology in order to develop a lean and efficient method for synthesis of Lithium battery grade carbon monofluoride (CFx). The focus of the development work will be on continuous processing, application of domestic raw materials and use of modern material de-aggregation techniques for particles of th ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  2. Advanced Manufacturing Technologies

    SBC: ADVANCED CERAMICS MANUFACTURING, LLC            Topic: DLA152001

    A new approach to manufacturing is needed to streamline the logistics of maintaining legacy aircraft. Recently, Advanced Ceramics Manufacturing (ACM) developed a water soluble tooling technology (FastCore) that can reduce the cost of Fiber Reinforced Plastics (FRP) composite components. The FastCore family of products allows ACM to rapidly create water soluble mandrels for composite manufacturer ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  3. Low-Cost Manufacture of High-Temperature Heat Exchangers

    SBC: CREARE LLC            Topic: DLA152001

    Precision laser welding shows great promise as a method for manufacturing high-temperature heat exchangers that can improve the performance of gas turbine engines used in unmanned air systems (UAS).UASs are finding broad use for intelligence, surveillance, and reconnaissance (ISR) missions for all DoD services and need these high-temperature heat exchangers (also called recuperators) to improve pe ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  4. Compression Molding of Cerramic Green Tape

    SBC: Mentis Sciences, Inc.            Topic: DLA152001

    The operational envelope of hypersonic projectiles and missiles is expanding to higher speeds and more sophisticated RF guidance systems.With this additional operational regime the need for low cost, high temperature materials, such as ceramics is becoming more important.Engineered ceramics manufacturing is a difficult process with frequent instances of flaws which are fatal for ceramic components ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  5. Colorimetric Monitoring of Trace Toxic Air Pollutants

    SBC: ChemSensing, Inc.            Topic: N/A

    One of the program areas of interest to the U.S. Environmental Protection Agency (EPA) is the development of rapid, non-invasive monitors to detect exposure to toxic air pollutants at trace (ppt) levels. Of the 356 chemicals listed on the Chemical Emergency Preparedness and Prevention Office¿s List of Extremely Hazardous Substances (Section 302 of the Emergency Planning and Community Right-To-Kn ...

    SBIR Phase I 2003 Environmental Protection Agency
  6. Near-Zero VOC General OEM Bake Enamel

    SBC: Finishes Unlimited, Inc.            Topic: N/A

    Finishes Unlimited, Inc., produces baking enamels for general purpose original equipment manufacturers who make sundry metal products such as lockers, tool boxes, compressors, folding chairs, storage racks, etc. Although it is a small company, Finishes Unlimited, Inc., has been among the leaders in one type of environmentally friendly coatings (i.e., waterborne bake enamels). In 1993, it became ...

    SBIR Phase I 2003 Environmental Protection Agency
  7. Low-Cost Machining Without Cutting Fluids

    SBC: CREARE LLC            Topic: N/A

    Cutting fluids have been used in machining processes for many years to decrease the temperature during machining by spraying the coolant into the machining zone, directly on the cutting tool and the part. This has the effect of decreasing the tool temperature, which increases tool life and improves the part quality. These benefits come with significant drawbacks. Cutting fluids are environmenta ...

    SBIR Phase II 2003 Environmental Protection Agency
  8. Rapid and Sensitive Electrochemical-Based Method for Improved Detection of Cryptosporidium parvum in Water

    SBC: VEGRANDIS, LLC            Topic: N/A

    Cryptosporidium parvum, a waterborne pathogen, is a serious threat to the Nation¿s water supply. It does not respond to common antibiotics and resists water purification treatments. It is of interest to not only monitor C. parvum oocysts in drinking water, but also to study their fate in the environment from various sources (e.g., cattle) in lakes and streams. This is especially important to ...

    SBIR Phase I 2003 Environmental Protection Agency
US Flag An Official Website of the United States Government