You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Objective Measurement Tool for Detection and Monitoring of Noise-Induced Hearing Loss

    SBC: Mimosa Acoustics Inc.            Topic: DHP15015

    We propose to take our hearing-test device, which was designed to support research in advancing hearing-conservation programs, and ruggedize it for use in theater. Five key challenges that make the commercial-off-the-shelf OAE systems unsuitable for HCPs, will be overcome. We will: 1) implement next-generation otoacoustic emission tests to enable OAE measurements in noise-damaged ears, 2) add smar ...

    SBIR Phase I 2015 Department of DefenseDefense Health Agency
  2. Novel Methods to Monitor Health Status and Clinical Laboratory Data: Portable Acquisition, Assessment, and Reporting

    SBC: Mimosa Acoustics Inc.            Topic: OSD09H26

    Mimosa Acoustics will develop a portable binaural audiological device, based on our successful HearID system. HearID is a clinical system for otoacoustic emission and middle-ear power analysis testing; it is FDA and CE-marked. The new system will have the ability to conduct a variety of audiological tests especially for use in hearing-conservation programs, including: flexible otoacoustic emission ...

    SBIR Phase II 2015 Department of DefenseDefense Health Agency
  3. Low Cost Carbon Fluoride Active Materials for BA-5790/U Lithium Batteries

    SBC: AMERICAN ENERGY TECHNOLOGIES CO            Topic: DLA152001

    American Energy Technologies Co. will partner with Eagle Picher Technologies and Alion Science & Technology in order to develop a lean and efficient method for synthesis of Lithium battery grade carbon monofluoride (CFx). The focus of the development work will be on continuous processing, application of domestic raw materials and use of modern material de-aggregation techniques for particles of th ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  4. Advanced Manufacturing Technologies

    SBC: ADVANCED CERAMICS MANUFACTURING, LLC            Topic: DLA152001

    A new approach to manufacturing is needed to streamline the logistics of maintaining legacy aircraft. Recently, Advanced Ceramics Manufacturing (ACM) developed a water soluble tooling technology (FastCore) that can reduce the cost of Fiber Reinforced Plastics (FRP) composite components. The FastCore family of products allows ACM to rapidly create water soluble mandrels for composite manufacturer ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  5. Nanoporous Metal Organic Framework Filters for Removal of Gaseous Pollutants

    SBC: Cbana Laboratories            Topic: TopicC

    The objective of this project is to evaluate the feasibility of using some newly discovered materials, water-stable metal-organic frameworks (MOF), as filters for pollutants common in indoor air. By way of background, recent Defense Advanced Research Projects Agency (DARPA)-supported work from Professor Masel’s laboratory has shown that a new class of water-stable MOFs shows unprecedented adsorp ...

    SBIR Phase I 2010 Environmental Protection Agency
  6. Antimicrobial-Coated Granular Filter Media for Drinking Water Treatment

    SBC: Coating Systems Laboratories, Inc.            Topic: TopicE

    Coating Systems Laboratories, Inc., of Chandler, Arizona, has developed a quaternary ammonium chloride (QAC) coating with antimicrobial properties that may be attached to common granular filter media such as sand and zeolite. The potential for coating filter media to improve drinking water treatment with respect to both disinfection efficiency and the production of disinfection by-products could i ...

    SBIR Phase I 2010 Environmental Protection Agency
  7. Nanoporous Metal Organic Framework Filters for Removal of Gaseous Pollutants

    SBC: Cbana Laboratories            Topic: 09NCERC1

    The objective of this project is to evaluate the feasibility of using some newly discovered materials, water-stable metal-organic frameworks (MOF), as filters for pollutants common in indoor air. By way of background, recent Defense Advanced Research Projects Agency (DARPA)-supported work from Professor Masel’s laboratory has shown that a new class of water-stable MOFs shows unprecedented a ...

    SBIR Phase I 2010 Environmental Protection Agency
  8. Antimicrobial Coated Granular Filter Media for Drinking Water Treatment

    SBC: Coating Systems Laboratories, Inc.            Topic: 09NCERE1

    Coating Systems Laboratories, Inc., of Chandler, Arizona, has developed a quaternary ammonium chloride (QAC) coating with antimicrobial properties that may be attached to common granular filter media such as sand and zeolite. The potential for coating filter media to improve drinking water treatment with respect to both disinfection efficiency and the production of disinfection by-products co ...

    SBIR Phase I 2010 Environmental Protection Agency
  9. Colorimetric Monitoring of Trace Toxic Air Pollutants

    SBC: ChemSensing, Inc.            Topic: N/A

    One of the program areas of interest to the U.S. Environmental Protection Agency (EPA) is the development of rapid, non-invasive monitors to detect exposure to toxic air pollutants at trace (ppt) levels. Of the 356 chemicals listed on the Chemical Emergency Preparedness and Prevention Office¿s List of Extremely Hazardous Substances (Section 302 of the Emergency Planning and Community Right-To-Kn ...

    SBIR Phase I 2003 Environmental Protection Agency
  10. Near-Zero VOC General OEM Bake Enamel

    SBC: Finishes Unlimited, Inc.            Topic: N/A

    Finishes Unlimited, Inc., produces baking enamels for general purpose original equipment manufacturers who make sundry metal products such as lockers, tool boxes, compressors, folding chairs, storage racks, etc. Although it is a small company, Finishes Unlimited, Inc., has been among the leaders in one type of environmentally friendly coatings (i.e., waterborne bake enamels). In 1993, it became ...

    SBIR Phase I 2003 Environmental Protection Agency
US Flag An Official Website of the United States Government