List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Reheating Air Inside Diving Equipment and Regulators (RAIDER)

    SBC: Paragon Space Development Corporation            Topic: SOCOM182003

    Military divers are experiencing negative medical side effects from inhalation of cold air or mixed gas (HeO2) while diving with a closed-circuit breathing apparatus.Therefore, SOCOM is looking for an innovative device that will reheat a divers inspired breathing gas to prevent a diver from experiencing hypothermia.Paragon will apply relevant experience in the design and manufacturing of active an ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  2. Handheld Hidden Chamber Detection

    SBC: VAWD APPLIED SCIENCE & TECHNOLOGY CORPORATION            Topic: SOCOM173004

    VAWD has extensive experience developing technologies and products for Sense Through The Wall (STTW) and RF Penetration through materials. Based on our experience we believe that the RF spectrum is a natural fit to solve this problem. Therefore we have constrained our trade space for an optimized microwave technology solution.VAWD proposes techniques that will use Multi-Frequency discrimination in ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  3. Reverse Engineering- Light, Dome: NIIN 015639517

    SBC: Breault Research Organization, Inc.            Topic: DLA171002

    The trend over the last several years is fewer businesses supplying manufactured products. Thus, by supply and demand, the cost of military hardware has increased with less competition. Furthermore, amortized cost of the qualifying a new product becomes cost prohibited resulting in non-competitive bids compared to historical averages. DLAs Replenishment Parts Purchase or Borrow program supports re ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  4. Group 2 (<55lbs) Unmanned Aerial System for Special Operations Forces Tactical-Level Intelligence, Surveillance, and Reconnaissance Operations

    SBC: THORPE SEEOP CORP            Topic: SOCOM172005

    A technical approach is proposed to survey the industry for state of the art capabilities in terms of the SOCOM mission requirements described in the solicitation for the Group 2 Tactical ISR UAS. The results of the survey will select a configuration of potential candidate UAS that would meet the threshold and ultimately objective goals stated.

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  5. Development of a Scalable, Low-Cost, Ultrananocrystalline Diamond Electrochemical Process for the Destruction of Contaminants of Emerging Concern (CECs)

    SBC: Advanced Diamond TechNologies, Inc.            Topic: E

    This Small Business Innovation Research (SBIR) project will develop and ready for commercialization a scalable, low-cost process for purification of water containing Contaminants of Emerging Concern (CECs) using anodic oxidation with boron-doped ultrananocrystalline diamond (UNCD®) thin films. Resent research demonstrated that there is considerable potential for the development of electrochemica ...

    SBIR Phase I 2011 Environmental Protection Agency
  6. L-(+) Lactic Acid Production from Biodiesel Waste Using Pelletized Fungal Fermentation

    SBC: Omnilane, Inc.            Topic: H

    "With the rapid growth of biodiesel industry, the production of crude glycerol as one of major biodiesel byproducts has been dramatically increased. Fully utilizing such a large quantity of crude glycerol is critical to the sustainability of biodiesel industry. Lactic acid is an important industrial chemical that is widely used as a food additive for flavoring and preservative, a moistener in co ...

    SBIR Phase I 2011 Environmental Protection Agency
  7. Rapid Additive Manufacturing of Very Low Cost 3-Dimensional Titanium Alloy Components

    SBC: ATS-MER, LLC            Topic: DLA10001

    The designers, manufacturers, and end users of metal components are finding limitations in the performance that can be achieved with conventional steel and super alloys. As a result, they are increasingly turning to titanium (Ti) alloys, which can provide a substantial increase in performance. However, for most applications the cost of Ti

    SBIR Phase I 2011 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government