Award Data

The objective of this project is to evaluate the feasibility of using some newly discovered materials, water-stable metal-organic frameworks (MOF), as filters for pollutants common in indoor air. By way of background, recent Defense Advanced Research Projects Agency (DARPA)-supported work from Professor Masel’s laboratory has shown that a new class of water-stable MOFs shows unprecedented adsorp ...

This SBIR project addresses the problem of waste and low manufacturing yield in the typical thin film manufacturing process. It has the potential to make a significant impact on energy utilization and become a critical component to making thin film processes cost effective, leading to waste-free manufacturing. Thin film deposition processes are extensively used in man-critical industries with sign ...

Coating Systems Laboratories, Inc., of Chandler, Arizona, has developed a quaternary ammonium chloride (QAC) coating with antimicrobial properties that may be attached to common granular filter media such as sand and zeolite. The potential for coating filter media to improve drinking water treatment with respect to both disinfection efficiency and the production of disinfection by-products could i ...

Emissions of volatile organic compounds (VOCs) and hazardous air polutants (HAPS are a serioud environmental issue. These pollutants are requlated to protect human health and encourage the development of better control technologies. Current technologies to control thses emissions, until better materials are developed, include destructive and/or recovery-based technologies. Implementation of ads ...

N/A

Caviton has developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can b detected and the focus of this Phase II project is to develop a sampling system, carry out laboratory tests, then move to field tests of sampling and analysis. Finall ...

Caviton has developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can b detected and the focus of this Phase II project is to develop a sampling system, carry out laboratory tests, then move to field tests of sampling and analysis. Finall ...

CEDAR Systems responds to the EPAs need for an inexpensive, convenient and rapid analytical method for the detection of pollution indicators for such as E. coli and enterococci in beach and other recreational waters as a means of identifying risk before exposure has taken place. Currently available tests are far from ideal in that they all require significant incubation periods (i.e. 18+ hours) t ...

CeraTech, Inc., proposes the development of novel (patent pending) phosphate-based concrete for fresh water and wastewater pipeline. The materials being investigated utilize a very high percentage of residual materials (coal ash, municipal solid waste ash, bio-solids ash, etc., up to 80 wt%). The concrete exhibits zero shrinkage as well as extremely high bondability to both concrete and reinforc ...

This project addresses the national need to continuously monitor and control mercury emission from industrial, municipal and energy-production sources. The proposed development of novel chemical microsensors and instrumentation have a unique combination of advantages to satisfy this need. The small sample size required by the microsensors in these instruments will both prolong their useful lifet ...