List

METSS proposes to design a novel polymer system based on polypropylene with covalently attached antioxidants to mitigate issues with chemical permeation and water quality with current waterpipe materials. Polypropylene was selected as it has inherently good physical properties and low permeability that will limit chemical migration from the outside, addressing one critical factor impacting water q ...

METSS will demonstrate the feasibility of utilizing two separate technologies, chlorine dioxide (ClO2) and Hot Air Decontamination (HAD; high temperature/low humidity) as on-site decontamination processes for treating_x000D_ Category A virus contaminated items including porous materials (e.g., upholstery, bedding, fabric, carpet, unpainted wood); sensitive equipment; and potentially reusable mater ...

Recognizing the need to monitor formaldehyde gas in residential and industrial buildings,_x000D_ Giner, Inc. (Giner) will continue the successful work started in Phase I and will develop,_x000D_ fabricate and demonstrate a formaldehyde gas monitor that is capable of continuously_x000D_ measuring formaldehyde in the range of 0-2000 parts per billion (ppb) with a resolution of 10 ppb. The wireless c ...

TIAX has developed a technology to meet EPA and homeland security needs for bio-agent decontamination in railway cars and other situations. It provides simultaneous encapsulation and killing of biological contaminants with the added capability for decontamination of chemical and radiological hazards. Current technologies are labor-intensive involving separate steps for site preparation, decontamin ...

Formaldehyde is a reactive and flammable aldehyde which is well known as one of the harmful volatile organic compounds. A_x000D_ combination of respiratory disease, allergic dermatitis and other ailments so called Sick Building Syndrome (SBS) is associated with chronic exposure to formaldehyde. Therefore, monitoring for formaldehyde is important in residential buildings. In this Phase I_x000D_ dev ...

Methane is the second most prevalent greenhouse gas emitted after carbon dioxide, however, on a pound-to-pound comparison methane has a 25 times greater impact on climate change than carbon dioxide over a 100-year period. Accordingly, the 2014 Climate Action Plan signed by President Obama has directed agencies including the USDA, DOE, and EPA to reduce methane emissions. A significant effort in th ...

Capacitive deionization (CDI) is a robust, energy efficient, and cost effective technology for water desalination. In collaboration with Dr. Satish Kumar and Dr. Costas Tsouris at Georgia Tech, we are developing nanostructured carbon material for effective and economical water and wastewater desalination. Our new approach for CDI is enabled by (1) synthesis of nanostructured high surface area acti ...

Exposure to hazardous organic compounds (OCs) in the indoor environment can cause serious health issues. There are no commercially available devices for inexpensive autonomous continuous monitoring of OCs that generates actionable data (identification and quantification of the compound) that can be used for reducing the health risks associated with OC exposure. The proposed sensor technology has ...

The proposed technology addresses the need for mitigation of the impacts of animal agriculture on the environment via recovery of phosphorus and nitrogen. Concentrated animal feeding operations create significant amounts of waste in the form of manure digestate; disposal at a cost of $1.6B. Microbial electrolysis cells have been explored as a chemical free, energy efficient method of extracting nu ...

TIAX has developed a technology that meets the EPA' s need for decontamination of biological material in railway and subway cars. It provides simultaneous encapsulation and killing of biological contaminants with the added capability for decontamination of chemical and radiological hazards. Current technologies are manpower intensive involving separate steps for site preparation; decontamination; ...