Award Data

A team at EP Purification has performed research for the development and commercialization of low-cost microchannel plasma reactor modules capable of efficiently producing ozone for water treatment and other environmental applications in a slim form factor and size. The conservation of water resources for human consumption is a growing national priority. Ozone is a unique purification agent as it ...

This project focuses on dissolution and destruction of adhered or trapped target compounds, such as pesticides on wetted porous surfaces (e.g., pipe walls). Our innovative treatment approach is based on simultaneous: (1) desorption from the pipe wall, and (2) oxidation via radical formation. OxyZone-C®, a proprietary reactive agent developed by our team, combines highly effective cyclodextrin­fa ...

Presently, there are no U.S. manufacturers for producing dimethyl carbonate (DMC), an environmentally benign and nonflammable solvent used in numerous applications. This strategically important solvent is used in numerous products, ranging from batteries to plastics, with most production occurring in China. DMC is a favored solvent for lithium ion batters due to its low volatility and nonflammable ...

A variety of inorganic and organic contaminants originating from municipal, agricultural and industrial wastewater sources are being found with increasing frequency in the Nation’s natural and drinking water supplies. These “emerging contaminants” include pharmaceuticals, antibiotics, steroids, hormones, flame retardants, perfluorinated compounds, personal care products, and herbicides and p ...

This Small Business Innovation Research Phase II project addresses the need for improved monitoring technologies for continuous particulate mass and chemical speciation of ambient aerosols. Aerodyne Research, Inc. will develop a prototype Aerosol Chemical Speciation Monitor (ACMS) that measures ambient aerosol mass and chemical composition of non-refractory submicron aerosol particles in real-tim ...

The goal of this Phase I research project is to develop a novel MicroElectroMechanical Systems-based sensor capable of detecting low levels of biotoxins in drinking water. An automated detection system based on this technology will fulfill a critical need in homeland security threat management. Central to the proposed sensing approach is a resonating microstructure optimized for sensitive system ...

Boston MicroSystems, Inc. (BMS), proposes to develop a MicroElectroMechanical System (MEMS) based volatile organic compound (VOC) monitor by integrating analyte-specific polymer films with SiC-AlN microresonators. In this research project, BMS and the Naval Research Laboratory will integrate microresonators and polymer films with functional groups sensitive to aromatic compounds (e.g., benzene an ...

Caviton has developed a novel technique for the continuous monitoring of trace metals emissions. This technique is based on a microdischarge light, which is collected by a spectrometer and analyzed. All metals tested to date can b detected and the focus of this Phase II project is to develop a sampling system, carry out laboratory tests, then move to field tests of sampling and analysis. Finall ...

Improved low-flow (50,000 gallons per day) sanitary wastewater treatment systems are needed. CeraMem Corporation¿s proposed approach includes a membrane bioreactor (MBR) using fully proven biological processes for biological oxygen demand oxidation and (optionally) for nutrient removal (i.e., denitrification and phosphorus removal). The technology has as a key inventive element¿a novel, compac ...

The ability to detect and identify trace quantities of hazardous materials has become a significant requirement for protecting the population during the war on terrorism. However, the ability to detect and identify trace concentrations of a wide range of chemicals in the field using a man-portable instrument is severely limited. The ability to quickly and reliably identify toxic industrial chemi ...