List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Green Materials for Doubling the Life of Drinking Water Pipeline

    SBC: HJ3 Composite Technologies, LLC            Topic: B

    Of the18,000 miles of pre-stressed concrete cylinder pipe (PCCP) within the drinking water transmission infrastructure laid between 1945 and 1996 in the United States, almost one-half, or 8,600 miles of pipe, is considered to be end-of-life infrastructure, awaiting funding for replacement. The American Society of Civil Engineers (ASCE) gave the United States a grade of D for its drinking water inf ...

    SBIR Phase I 2014 Environmental Protection Agency
  2. Antimicrobial-Coated Granular Filter Media for Drinking Water Treatment

    SBC: Coating Systems Laboratories, Inc.            Topic: TopicE

    Coating Systems Laboratories, Inc., of Chandler, Arizona, has developed a quaternary ammonium chloride (QAC) coating with antimicrobial properties that may be attached to common granular filter media such as sand and zeolite. The potential for coating filter media to improve drinking water treatment with respect to both disinfection efficiency and the production of disinfection by-products could i ...

    SBIR Phase I 2010 Environmental Protection Agency
  3. Antimicrobial Coated Granular Filter Media for Drinking Water Treatment

    SBC: Coating Systems Laboratories, Inc.            Topic: 09NCERE1

    Coating Systems Laboratories, Inc., of Chandler, Arizona, has developed a quaternary ammonium chloride (QAC) coating with antimicrobial properties that may be attached to common granular filter media such as sand and zeolite. The potential for coating filter media to improve drinking water treatment with respect to both disinfection efficiency and the production of disinfection by-products co ...

    SBIR Phase I 2010 Environmental Protection Agency
  4. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: ATS-MER, LLC            Topic: N/A

    Titanium with its inherent lightweight, corrosion resistance and mechanical properties is a critical and strategic metal in civilian and defense aviation, oil extraction and processing, water purification, the general chemical industry, and would be in automotive transportation if it were more economical. The entire world¿s supply of titanium as a sponge has been produced by the Kroll process fo ...

    SBIR Phase II 2009 Environmental Protection Agency
  5. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: Environmental Abrasives, LLC            Topic: 08NCERP1

    Titanium with its inherent lightweight, corrosion resistance and mechanical properties is a critical and strategic metal in civilian and defense aviation, oil extraction and processing, water purification, the general chemical industry, and would be in automotive transportation if it were more economical. The entire world’s supply of titanium as a sponge has been produced by the Kroll process f ...

    SBIR Phase II 2009 Environmental Protection Agency
  6. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: ATS-MER, LLC            Topic: N/A

    All titanium is produced by the Kroll process, which is a batch process for the magnesium (Mg) reduction of titanium tetrachloride (TiCl4). Separate operations are required to produce the toxic and very corrosive TiCl4, which must be stored and transported. Magnesium also is produced separately in liquid form via the electrolysis of magnesium chloride (MgCl2), which requires storage and transport ...

    SBIR Phase I 2008 Environmental Protection Agency
  7. Addressing the Driving Needs of Short Stature Persons

    SBC: SAFE INC            Topic: 04NH1

    Phase I research on the development of a supplemental seating system for short stature drivers was undertaken by Safe Inc. in 2005. The purpose of Phase I was to demonstrate the feasibility of a device that would improve the ability of short stature drivers to safely operate a motor vehicle and to improve occupant crash safety. The study sought to examine the use of pedal extenders and other imp ...

    SBIR Phase II 2008 Department of Transportation
  8. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: Environmental Abrasives, LLC            Topic: 07NCERA1

    All titanium is produced by the Kroll process, which is a batch process for the magnesium (Mg) reduction of titanium tetrachloride (TiCl4). Separate operations are required to produce the toxic and very corrosive TiCl4, which must be stored and transported. Magnesium also is produced separately in liquid form via the electrolysis of magnesium chloride (MgCl2), which requires storage and transport ...

    SBIR Phase I 2008 Environmental Protection Agency
  9. Rapid Indicator for Pollution

    SBC: CEDAR Systems            Topic: N/A

    CEDAR Systems responds to the EPAs need for an inexpensive, convenient and rapid analytical method for the detection of pollution indicators for such as E. coli and enterococci in beach and other recreational waters as a means of identifying risk before exposure has taken place. Currently available tests are far from ideal in that they all require significant incubation periods (i.e. 18+ hours) t ...

    SBIR Phase I 2007 Environmental Protection Agency
  10. A Universal Commuter Railcar Boarding Device for Use by Both Disabled and Able-bodied Individuals Configurable for all U.S. Railstation Platforms

    SBC: SAFE INC            Topic: N/A

    In Phase I of this SBIR project the proposed commuter railcar loading concept was developed in detail and its operation was simulated in order to demonstrate feasibility and to quantify the reduction in station dwell time compared to other railcar loading operations. Feasibility was demonstrated. The boarding system will enable the loading of all passengers, regardless of mobility, from a wide r ...

    SBIR Phase II 2007 Department of Transportation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government