You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Long Term Behavior, Failure Analysis & In-Service Testing of Composite Cylinders

    SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC.            Topic: 101PH1

    TRI proposes to develop reliable methodology and protocols for in-service inspection,recertifying and retiring DOT COPVs to maximize service life while ensuring personnel safety. This method must be sufficiently robust to prevent in-service failures, while being straightforward and affordable enough to be conducted at cylinder recertification facilities. To accomplish this with a high degree of co ...

    SBIR Phase I 2011 Department of Transportation
  2. Development of a non-destructive, quantitative residual stress assessment tool

    SBC: Generation 2 Materials Technology Llc            Topic: 111PH2

    A nondestructive tool will be developed to quatitatively assess residual stress in pipelines from the exterior and through coatings. Residual stress is a critical factor that determines the cracking susceptibility of pipeline steels, but existing methods for measuring mechanical damage in pipeline steels are incapable of quantifying the residual stress levels. A larger gouge or dent does not nec ...

    SBIR Phase I 2011 Department of Transportation
  3. Stress and Geometry Imaging from Outside the Pipeline

    SBC: JENTEK SENSORS, INC.            Topic: 111PH1

    There is a well defined, yet unfulfilled need for a convenient (non-contact, light weight) and rapid imaging tool for multi-directional, thru-wall stresses (both applied and residual) from the outside of a pipeline. Quantitative stress imaging is needed at mechanical damage and corrosion sites, as well as at other critical locations (dents, bends, etc.). JENTEK is uniquely positioned to deliver ...

    SBIR Phase I 2011 Department of Transportation
  4. Microelectrochemical Capillary System for Environmental Analytical Lab on a Chip

    SBC: LYNNTECH INC.            Topic: C

    "As part of its mission to protect human health and the environment, the U.S. Environmental Protection Agency is dedicated to developing and promoting innovative cleanup strategies that restore contaminated sites to productive use, reduce associated costs, and promote environmental stewardship. However, in adopting this strategy there will be an increasing need to implement a more cost effective, ...

    SBIR Phase I 2011 Environmental Protection Agency
  5. Advanced Contaminant Inactivation System for Drinking Water

    SBC: REACTIVE INNOVATIONS, LLC            Topic: E

    "The environmental Protection Agency is soliciting innovations for the development of small unit drinking water systems that will inactivate contaminants including pesticides, organic pollutants, pharmaceuticals, personal care products, and pathogens. In the US, 85% of all public water systems serve fewer than 3,300 people, thus these water systems are considered small. For providing these small ...

    SBIR Phase I 2011 Environmental Protection Agency
  6. A Real-Time, Sensitive and Affordable Fast-Response Elemental Carbon Monitor

    SBC: EcoChem Analytics            Topic: G

    "This SBIR Phase I project will develop an affordable, sensitive, fast-response solution to real-time monitoring of Elemental Carbon (EC). EcoChem will employ a proven sensor technology, the photoemission aerosol sensor (PAS) to detect EC. The PAS photoionizes carbonaceous aerosols with a unique excimer lamp [Burtscher, 1992] whose wavelength is chosen to selectively ionize EX and polycyclic aro ...

    SBIR Phase I 2011 Environmental Protection Agency
  7. Fourier Transform Infrared Phase Shift Cavity Ring Down Spectrometer

    SBC: Optra, Inc.            Topic: G

    "OPTRA proposes a Fourier transform phase shift cavity ring down spectroscopy (FT-PS-CRDS) system for high sensitivity detection of air toxic compounds. Our system operates in the 400-4000 cm-1 spectral range wherein lie vapor phase resonance bands for most air toxic compounds and hazardous chemicals; the spectral resolution is 4-16 cm-1, depending on the discrimination requirements. Our approac ...

    SBIR Phase I 2011 Environmental Protection Agency
  8. A Low-Cost Real Time Bio-Electrochemical Nitrate Sensor for Surface Water Monitoring

    SBC: CAMBRIAN INNOVATION, INC.            Topic: I

    "Nitrate (NO3) in surface water runoff from agriculture activities is a serious environmental problem. Nitrate levels in United States waterways have increased dramatically in the past half-century, two0fold in the Mississippi River since 1965 and as much as ten-fold in the northeast since 1990. This widespread nitrate contamination has led to significant environmental consequences. In particul ...

    SBIR Phase I 2011 Environmental Protection Agency
  9. Handheld FRET-Aptamer Sensor for Chem-Bio Threats

    SBC: Operational Techologies Corporation            Topic: J

    "Operational Technology Corporation (OpTech) proposes to couple the ultrasensitivity of fluorescence-based detection with the high selectivity of synthetic DNA aptamers as replacements for antibodies to detect chemical and biological (CB) terrorism threats in 10 minutes or less from a variety of swabbed surfaces and liquid matrices. OpTech has previously provided strong proof-of-concept for a rap ...

    SBIR Phase I 2011 Environmental Protection Agency
  10. PM 2.5 Emissions Reduction for Two-Stroke Engines

    SBC: AERODYNE RESEARCH INC            Topic: TopicG

    Small particulate emissions, such as those that fall within the PM2.5 classification, have a substantial negative effect on air quality and human health. Significant sources of PM2.5 emissions are small two-stroke engines that are used in outdoor power equipment such as leaf blowers, chain saws, and string trimmers, as well as larger two-stroke engines used in recreational vehicles such as all-ter ...

    SBIR Phase I 2010 Environmental Protection Agency
US Flag An Official Website of the United States Government