List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Remediation of Oil Contaminated Ground and Surface Water Using Sulfate Nanofiltration Combined with High Efficiency On-Site Generation of Peroxodisulfate Using Ultrananocrystalline Diamond Electrodes

    SBC: Advanced Diamond TechNologies, Inc.            Topic: A

    This Small Business Innovation Research (SBIR) project will employ Nanofiltration to generate sulfate ion feedstocks and high current density on-site generation (synthesis) of the powerful oxidant peroxodisulphate (“persulfate”) with novel, high reliability boron-doped untrananocrystal-line diamond (UNCD) electrodes to dramatically lower the cost of unconventional fossil fuel (FF) waste water ...

    SBIR Phase I 2013 Environmental Protection Agency
  2. Low Cost, Efficient Microchannel Plasma Ozone Generator for Point of Use Water Treatment

    SBC: EP Purification, Inc.            Topic: A

    A team of EP Purification and the University of Illinois engineer and chemists is pursuing the commercialization of low cost microchannel plasma modules capable of efficiently producing ozone for water treatment. The conservation of water resources for human consumption is a growing national priority. Contamination of ground municipal water by animal manure, fertilizer and pharmaceuticals, for e ...

    SBIR Phase I 2013 Environmental Protection Agency
  3. A 10 Kilowatt, Rankin Cycle Agricultural Waste to Energy Conversion Module Utilizing Ultra Micro Turbo-Alternators

    SBC: Fluidic microControls, Inc.            Topic: H

    In 2011, there were 60,000 dairy farms in the US. Of there, 56,600 had herds of fewer than 500 animals. Currently, manure digester installations are only considered economical for herds of at least 500 animals. There require turbine or diesel generator sets of 100 Kilowatt size and larger. The need exists for a smaller waste to energy conversion approach for implementation on small farms were ...

    SBIR Phase II 2013 Environmental Protection Agency
  4. Temperature, Heat Flux and Recession Sensing for Ablative Thermal Protection Systems

    SBC: Industrial Measurement Systems Inc.            Topic: X901

    The Phase I program demonstrated the efficacy of real-time of ultrasonic recession measurements on low density TPS materials. Measurements on internal echoes established the feasibility of non-intrusive temperature measurements. In the Phase II program we will continue to improve, optimize, and extend the technology. Sensors with better elevated temperature performance will be developed and con ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  5. SPHERICAL COVERAGE DUAL MODE SENSOR FOR UAS SEPARATION ASSURANCE

    SBC: Epsilon Lambda Electronics Corp.            Topic: A201

    Proposed is a dual-mode sensor for use aboard unmanned aircraft for safe operation in the NAS that:1. Incorporates high resolution Millimeter Wave radar with high resolution Electro-Optical sensor.2. Achieves complete real time, full time spherical coverage around the UAS platform by employing two hemispherical dual mode sensors, one directed forward and one directed to the rear.[which exceeds the ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  6. Comprehensive Simulation Lifecycle Management for High Performance Computing Modeling and Simulation

    SBC: Illinoisrocstar, L.L.C.            Topic: S501

    There are significant logistical barriers to entry-level high performance computing (HPC) modeling and simulation (M & S) users. Performing large-scale, massively parallel computations on modern supercomputing platforms is a very challenging task in and of itself. It requires huge amounts of analyst resources to construct datasets, transfer files, build codes, submit and monitor jobs, and anal ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  7. High-Volume Production of Lightweight, Multi-Junction Solar Cells Using 6-inch GaAs

    SBC: MicroLink Devices            Topic: X804

    In the proposed Phase II program, we will transition MicroLink's 6-inch epitaxial lift-off (ELO) solar cell fabrication process into a manufacturing platform capable of sustaining large-volume production. Key Phase II improvements in the ELO process are reduction in cycle time and increase in the yield of large-area devices. In addition, we will transition all critical device fabrication process ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  8. Cost Reduction of IMM Solar Cells by Recycling Substrates Using Wet Chemical Etching

    SBC: MicroLink Devices            Topic: H804

    This program focuses on reducing the cost of substrate reclaim for high-efficiency solar cells fabricated via an epitaxial lift-off (ELO) process, while increasing the number of reuse cycles possible for a given substrate. We will introduce a new multi-layer etch-stop structure into inverted metamorphic (IMM) triple-junction solar cells grown on 100-mm GaAs substrates. The etch-stop structure wi ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  9. Development of Advanced Anti-Reflection Coatings for High Performance Solar Energy Applications

    SBC: MicroLink Devices            Topic: S302

    MicroLink and its subcontractor Magnolia Solar will develop and demonstrate advanced anti-reflection coating (ARC) designs that will provide a better broadband and angular response than that of current coatings. Advanced coatings of this nature are needed to realize the full potential forthcoming generation of multi-junction solar cells that will contain four or more junctions. We will undertake ...

    SBIR Phase I 2013 National Aeronautics and Space Administration
  10. CubeSat High Impulse Propulsion System (CHIPS)

    SBC: CU AEROSPACE L.L.C.            Topic: S303

    CU Aerospace proposes the ground test validation of a nanosat primary propulsion subsystem using non-toxic propellant with 3-axis ACS for orbit change and/or de-orbit capability, precision maneuvering, and drag makeup. Our approach, called the CubeSat High Impulse Propulsion System (CHIPS), leverages the existing Micro Propulsion System (MiPS) thruster technology development by our team partner VA ...

    SBIR Phase I 2013 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government