You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Enabling Electrostatic Painting of Automotive Polymers with Low Cost Carbon Nanofibers

    SBC: Applied Sciences Inc.            Topic: N/A

    Polymer composites are widely used for automotive body panels to save weight, increase fuel efficiency, and eliminate corrosion. However, unlike metals, structural polymers are not electrically conductive; thus, they are not amenable to the industry standard technique of electrostatic spray painting (ESP). Current methods for adapting polymers to ESP pose serious environmental and economic chall ...

    SBIR Phase I 2006 Environmental Protection Agency
  2. Development of a Reliable, Low-Cost and User-Friendly Spot Test Kit for Leaded Paint and Dust Based on Recent Advances in Bionanotechnology

    SBC: ANDALYZE, INC.            Topic: N/A

    Lead in household paint and dust is a serious health hazard as low level lead exposure can result in a number o adverse health effects, especially in children. On-site and real-time detection and quantification of lead in the paint/dust is very important to homeowners and certified lead-based paint removal professionals. Toward this end, both field-portable equipment (such as x-ray fluorescence ...

    SBIR Phase I 2006 Environmental Protection Agency
  3. Isocyanate-Free Solvent-Free Hybrid Resin System

    SBC: DR. BEN CURATOLO, INC.            Topic: N/A

    This Small Business Innovation Research Phase II project is designed to develop and optimize a prototype environmentally friendly isocyanate-free solvent-free UV curable hybrid resin system demonstrated in EPA SBIR Phase I research to have properties suitable for commercial industrial applications such as automobile refinishing, floor coatings, and aircraft coatings. Properties of the proprietary ...

    SBIR Phase II 2006 Environmental Protection Agency
  4. Environmentally Benign Production of Nanoscale Materials

    SBC: Lynntech Inc.            Topic: N/A

    The proposed sorbents will have potential applications in i) industrial wastewater treatment plants, ii) municipal wastewater treatment plants, iii) nuclear waste treatment plants, iv) drinking water treatment plants, v) several types of existing point-of-use and point-of-entry water purifying systems, and vi) for remediation of various mercury contaminated sites using permeable reactive barrier ( ...

    SBIR Phase I 2006 Environmental Protection Agency
  5. Real-time Reagentless and Arrayed Detector for the Monitoring of Harmful Algal Bloom Toxins

    SBC: Lynntech Inc.            Topic: N/A

    Harmful algal blooms (HABs) occur in aquatic environments when conditions trigger an increase in the abundance of organisms that produce toxins. The toxins are transferred through the food web where they affect and even kill zooplankton, shellfish, fish, birds, marine mammals, and possibly humans. HABs have been estimated to cost the U.S. economy as much as $50 million per year due to the closure ...

    SBIR Phase I 2006 Environmental Protection Agency
  6. Meta-Structured Cements for Chrome Replacement

    SBC: Powdermet, Inc.            Topic: N/A

    This Phase I SBIR program¿s objectives are to demonstrate producing potentially very low cost nano/meta-structured thermal spray powders using recycled scrap tools or very low cost ceramic powders and to demonstrate superior materials properties of the meta-structured coating when applied using thermal spray. The result would be a new class of very low cost, nano structured cerment coatings th ...

    SBIR Phase I 2006 Environmental Protection Agency
  7. Etchant Recovery System

    SBC: Republic Anode Fabricators, Inc.            Topic: N/A

    Cupric chloride etchant is in wide use in the etching of copper, particularly in the manufacture of printed circuit boards. Currently, hazardous oxidants such as chlorine are used to regenerate this etchant. In addition, the hazardous waste generated must be hauled away and disposed of. The device under development will electrolytically regenerate the etchant without the addition of oxidizing c ...

    SBIR Phase II 2006 Environmental Protection Agency
  8. The Development and Evaluation of an Enhanced Electrostatic Precipitator for Poultry Dust Removal

    SBC: Tisch Environmental, Inc.            Topic: N/A

    Particulate emissions are one of the main air quality concerns in poultry farms and other animal feeding operations (AFO), and are especially significant in poultry AFO¿s. It can cause health damage to the AFO worker, become the nuisance to the neighborhoods and result in violations of the Clean Air Act. This proposal is a Phase I study of an innovative particulate control technology utilizin ...

    SBIR Phase I 2006 Environmental Protection Agency
  9. The Development and Evaluation of an Enhanced Electrostatic Precipitator for Poultry Dust Removal

    SBC: Tisch Environmental, Inc.            Topic: 05NCERA1

    Particulate emissions are one of the main air quality concerns in poultry farms and other animal feeding operations (AFO) and especially are significant in poultry AFOs. It can cause health damage to the AFO worker, become a nuisance to the neighborhoods, and result in violations of the Clean Air Act. This Phase I study focuses on an innovative particulate control technology utili ...

    SBIR Phase I 2006 Environmental Protection Agency
  10. Enabling Electrostatic Painting of Automotive Polymers with Low Cost Carbon Nanofibers

    SBC: Applied Sciences Inc.            Topic: 05NCERD1

    Polymer composites are used widely for automotive body panels to save weight, increase fuel efficiency, and eliminate corrosion. Unlike metals, however, structural polymers are not conductive electrically; thus, they are not amenable to the industry standard technique of electrostatic spray painting (ESP). Current methods for adapting polymers to ESP pose serious environmental and ec ...

    SBIR Phase I 2006 Environmental Protection Agency
US Flag An Official Website of the United States Government