You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Hotspot Enabled Accurate Determination of Common Area Occupancy Using Network Tools (HEADCOUNT)

    SBC: ENDEVEO INC.            Topic: DEFOA0001738

    "We propose a disruptive, user-transparent occupancy sensor to accurately determine the presence of occupants in residential buildings to enable temperature setbacks and provide energy savings of over 30% per year. Our technique utilizes standard 802.11ac (or higher) commercially available WiFi-equipped devices such as routers, access points and Raspberry Pi’s (hotspots) as sensors to monitor a ...

    SBIR Phase I 2018 Department of EnergyARPA-E
  2. Hotspot Enabled Accurate Determination of Common Area Occupancy Using Network Tools (HEADCOUNT)

    SBC: ENDEVEO INC.            Topic: DEFOA0001738

    We propose a disruptive, user-transparent occupancy sensor to accurately determine the presence of occupants in residential buildings to enable temperature setbacks and provide energy savings of over 30% per year. Our technique utilizes standard 802.11ac (or higher) commercially available WiFi-equipped devices such as routers, access points and Raspberry Pi’s (hotspots) as sensors to monitor an ...

    SBIR Phase II 2018 Department of EnergyARPA-E
  3. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Inexpensive Formaldehyde Sensors for Indoor Air Quality (IAQ) Applications

    SBC: Giner, Inc.            Topic: 16NCER1A

    Recognizing the need to monitor formaldehyde gas in residential and industrial buildings,_x000D_ Giner, Inc. (Giner) will continue the successful work started in Phase I and will develop,_x000D_ fabricate and demonstrate a formaldehyde gas monitor that is capable of continuously_x000D_ measuring formaldehyde in the range of 0-2000 parts per billion (ppb) with a resolution of 10 ppb. The wireless c ...

    SBIR Phase II 2018 Environmental Protection Agency
  5. PCS-Enabled Unattended Radiation Detection and Attribution System

    SBC: Physical Sciences Inc.            Topic: HSB0171009

    Physical Sciences Inc. (PSI) proposes to develop a PCS-Enabled Unattended Radiation Detection and Attribution System (PURDAS) that will be able to detect, identify, and attribute radiological sources to specific source carriers or conveyances. The PURDAS will include a COTS gamma and neutron detection capability as well as a visible camera, onboard processing, and wireless radios. PURDAS units wil ...

    SBIR Phase II 2018 Department of Homeland SecurityDomestic Nuclear Detection Office SBIR Program
  6. Solid State Sensor System for Inspection of Prestressed Concrete Pressure Pipe

    SBC: Radiation Monitoring Devices, Inc.            Topic: A

    An important type of water pipe is the Prestressed Concrete Cylinder Pipe (PCCP). There are thousands of miles of PCCP installed in the US in sections with length up to 20 feet and diameter for 2 to 14 feet. The large size of the pipes, the thickness of the concrete (up to 10 inches) and the composite construction, which involved concrete, high strength prestressing steel wires and sheet steel c ...

    SBIR Phase I 2013 Environmental Protection Agency
  7. A Low-Cost Rare Earth Elements Recovery Technology

    SBC: Physical Sciences Inc.            Topic: B

    Physical Sciences Inc. and the University of Kentucky Center for Applied Energy Research propose to develop a unique enabling technology to significantly reduce U.S. dependency for Rare Earth Elements (REE) on foreign suppliers and our global competitors. Our innovation is a process that utilizes very inexpensive and abundant domestic raw materials for high-yield and low-cost generation of REE in ...

    SBIR Phase I 2013 Environmental Protection Agency
  8. Size-Selection Aerosol Characterization Instrument

    SBC: Aerodyne Research, Inc.            Topic: G

    We propose to develop anew monitor that provides composition information of particles in the ultrafine (10-100 nm) fine (100 nm– 2.5 µm) and coarse (2.5 – 10 µm) size modes in near real time. Particle monitoring technologies are important for better characterization of the environmental, health and visibility effects of both anthropogenic and biogenic aerosol particles. Current monitoring t ...

    SBIR Phase II 2013 Environmental Protection Agency
  9. Environmentally-Benign Polytetrafluoroethylene (PTEE) Coating for Mold Release

    SBC: Gvd Corporation            Topic: C

    GVD proposed to develop high performance, VOC-free and PFOA-free, non-stick mold release coating based on its novel PTFE (Polytetraflouroethylene) fluoropolymer technology. Most commercial mold release agents make use of organic solvents and vaporize during drying, creating a significant air quality impact. Even water-based formulations often require the use of fluorinated surfactant additives to ...

    SBIR Phase II 2013 Environmental Protection Agency
US Flag An Official Website of the United States Government