Award Data

Ecovative Design uses grown mycelium structures to bind agricultural and wood byproducts into inherently nontoxic_x000D_ products containing no added urea formaldehyde or flame-retardant chemicals. This research program focuses_x000D_ on maturing mycelium technology for use in the production of large scale board products, from low density (LD) particle board to acoustic panels and thermal insulati ...

Perfluoroalkyl substances (PFASs) have received considerable attention due to their toxicity, ubiquitous presence and recalcitrance. Manufacture and disposal of PFAS-containing products has resulted in PFAS contamination of numerous water supplies. Recent reports indicate the Air Force alone is expecting to spend > $2.25 billion for cleanup for PFAS-contaminated sites. Thus, there is a huge market ...

This green approach to manufacturing plastic with decorative chrome will eliminate health and environmental hazards from the chrome electroplating process. The US and global market for decorative chrome on plastic is 12 million m2/year and 84 million m2/year respectively, with 80% in automobile trim, 10% in appliances and 10% in sanitary fixtures. Without a viable commercial alternative, US provid ...

The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

The team of Monolith Semiconductor, X-FAB Texas, Rensselaer, United Technologies and Univ. of Arkansas will provide breakthrough advances in switch performance and manufacturing cost reduction to deliver cost-effective 100Amp, 1200V SiC power MOSFETs to enable widespread adoption. Based on the combined expertise in both Silicon and SiC power device design and processing, Monolith Semiconductor is ...

The team of Monolith Semiconductor, X-FAB Texas, Rensselaer, United Technologies and Univ. of Arkansas will provide breakthrough advances in switch performance and manufacturing cost reduction to deliver cost-effective 100Amp, 1200V SiC power MOSFETs to enable widespread adoption. Based on the combined expertise in both Silicon and SiC power device design and processing, Monolith Semiconductor is ...

The team of Monolith Semiconductor, X-FAB Texas, Rensselaer, United Technologies and Univ. of Arkansas will provide breakthrough advances in switch performance and manufacturing cost reduction to deliver cost-effective 100Amp, 1200V SiC power MOSFETs to enable widespread adoption. Based on the combined expertise in both Silicon and SiC power device design and processing, Monolith Semiconductor is ...

The use of plastic (polyethylene, Polypropylene, polyurethane and poly lactic acid) has grown and continues to grow steadily because of the materials’ high strength-to-weigh ratios, low cost, and ease of molding as compared to conventional natural materials. Unfortunately, almost all commercial plastics are notoriously unsustainable due to fossil fuel-based constituents, the wasteful and energy ...

SOLID-PHASE EXTRACTION, A CURRENTLY DEVELOPING TECHNOLOGY MAY BE USED FOR ENVIRONMENTAL SAMPLE PREPARATION. THE PRESENT METHODLOGY OF LIQUID/LIQUID EXTRACTION IS NOT PRAC- TICAL IN THE FIELD. MANY INVESTIGATORS HAVE STUDIED SOLID- PHASE EXTRACTION. HOWEVER, THESE WORKS ARE LIMITED TO NAR- ROW CLASSES OF COMPOUNDS. NO OVERALL METHODOLOGY IS AVAILA-BLE FOR PREPARING A SAMPLE CONTAMINATED WITH MULTIP ...