List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Plasma-Enhancement of Absorbers for Improved Removal of PFOS and PFOA from Water

    SBC: AA Plasma LLC            Topic: 17NCER1A

    New regulations and advisory levels for perfluoroalkyl substances have resulted in increased drinking water treatment costs or abandonment of drinking water sources. Treatment technologies are needed that can achieve low parts-per-trillion levels. Presently, there are insufficient treatment technologies that can destructively remove perfluorooctanoic acid (PFOA) and/or perfluorooctane sulfonic aci ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Building Materials from Scrap Tires and Waste Plastics

    SBC: PROFESSIONAL ANALYTICAL AND CONSULTING SERVICES INC            Topic: 15NCER06

    Two major waste streams, thermoplastics and used automotive tires, need a technological and economic method to decrease their entry into our environment. Both have long life-cycles as waste, causing many deleterious environmental problems. The Phase I, II , and Ill goal is to divert plastic and tire waste and its pollution away from landfills and the environment into transformational new technolog ...

    SBIR Phase I 2016 Environmental Protection Agency
  3. Biofuel Production from Grease Trap Waste

    SBC: Environmental Fuel Research, LLC            Topic: 13NCERF1

    Environmental Fuel Research, LLC (EFR-LLC), has demonstrated the technical feasibility of separating fats, oils, and greases (FOG) from grease trap waste (GTW) and converting FOG to biodiesel that can meet ASTM specifications. GTW is a dirty and low-value waste from the food service industry that is high in FOG and currently is treated as a liability. The EFR-LLC process uses a bubble column react ...

    SBIR Phase II 2015 Environmental Protection Agency
  4. Biofuel Production from Grease Trap Waste

    SBC: Environmental Fuel Research, LLC            Topic: F

    Environmental Fuel Research, LLC, proposes to commercialize a grease trap waste to biofuel process based on process research from Drexel University. Grease trap waste is dirty and low-value material produced by the food service industry that is high in lipids that can be converted to biodiesel. The quantity of grease trap waste in the United States could produce one-half billion gallons of biodies ...

    SBIR Phase I 2014 Environmental Protection Agency
  5. Cost-Effective Rare Earth Element Recycling Process from Industrial Scrap and Discarded Electronic Products to Valuable Magnetic Alloys and Permanent Magnets

    SBC: Electron Energy Corporation            Topic: C

    Rare earth element (REE) based Nd-Fe-B and Sm-Co permanent magnets have been widely used because of their excellent magnetic properties. The applications of Nd-Fe-B and Sm-Co rare earth permanent magnets include hybrid electric vehicles (HEVs), power generator for wind turbines, high performance industrial motors, hard disk drives for computers, travelling wave tubes for satellite communications, ...

    SBIR Phase II 2013 Environmental Protection Agency
  6. Cost-Effective Rare Earth Element Recycling Process from Industrial Scrap and Discarded Electronic Products to Valuable Magnetic Alloys and Permanent Magnets

    SBC: Electron Energy Corporation            Topic: C

    Rare-earth element (REE) based Nd-Fe-B and Sm-Co magnets have been widely used because of their excellent magnetic properties. The applications of Nd-Fe-B and Sm-Co rare earth permanent magnets include hybrid electric vehicles (HEVs), power generator for wind turbines, high performance industrial motors, hard disk drives for computers, travelling wave tubes for satellite communications, headphone ...

    SBIR Phase I 2012 Environmental Protection Agency
  7. Defect Detection in Water Pipelines Using Ultrasonic Guided Waves

    SBC: Fbs, Inc.            Topic: F

    The integrity of water piping infrastructures is essential for providing safe drinking water and for the treatment of wastewater. As pipelines age, they deteriorate, corrode, and crack. Existing techniques, such as visual observation and closed circuit TV, for assessing piping integrity are expensive and have difficulty accessing particular regions of piping structures. Ultrasonic guided waves, on ...

    SBIR Phase II 2012 Environmental Protection Agency
  8. In-Situ Imaging of Water Pipelines Using Ultrasonic Guided Waves

    SBC: Fbs, Inc.            Topic: F

    "The widely distributed water infrastructure system provides drinking water and waste water treatment for human life and the environment. A significant amount of water infrastructure network has served the public for decades and is encountering aging problems. Water leakage resulting from aging infrastructure may put human life and public health at risk. Therefore, it is imperative to search fo ...

    SBIR Phase I 2011 Environmental Protection Agency
  9. Amorphous Alloy Coatings for Hard Chromium Replacement

    SBC: Integran Technologies U.S.A. Inc.            Topic: N/A

    Hard chromium coatings (0.25 to10 mil thick) are used extensively for imparting wear and erosion resistance to components in both industrial and military applications. The most common means of depositing hard chromium has been through the use of chromic acid baths containing hexavalent chromium (Cr+6). However, as a result of its toxicity, exposure levels of Cr+6 have been limited. An alternati ...

    SBIR Phase I 2009 Environmental Protection Agency
  10. Amorphous Alloy Surface Coatings for Hard Chromium Replacement

    SBC: Integran Technologies U.S.A. Inc.            Topic: 08NCERA1

    Hard chromium coatings (0.25 to10 mil thick) are used extensively for imparting wear and erosion resistance to components in both industrial and military applications. The most common means of depositing hard chromium has been through the use of chromic acid baths containing hexavalent chromium (Cr+6). However, as a result of its toxicity, exposure levels of Cr+6 have been limited. An alternati ...

    SBIR Phase I 2009 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government