You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A FUZZY SET APPROACH FOR SEISMIC SAFETY MARGINS ASSESSMENT.

    SBC: Eda Consultants            Topic: N/A

    THE CONTRACTOR SHALL DEVELOP A FUZZY SET METHODOLOGY FOR UNCERTAINTY ANALYSIS IN PROBABILISTIC SEISMIC SAFETY ASSESSMENT OF NUCLEAR POWER PLANTS. FUZZY SET LOGIC WILL BEUSED FOR COLLECTING, QUANTIFYING AND PROPAGATING SUBJECTIVE,ENGINEERING JUDGEMENT USED IN THE UNCERTAINTY ANALYSIS. IN PHASE I, FEASIBILITY OF THE PROPOSED APPROACH WILL BE DEMONSTRATED BY APPLYING IT TO SELECTED PARTS OF A PROBABI ...

    SBIR Phase I 1987 Nuclear Regulatory Commission
  2. A HIGH RESOLUTION CDTE ARRAY MONITORING SYSTEM FOR MONITORING CONTAMINATION IN SOILS

    SBC: Radiation Safety Engineering, Inc.            Topic: N/A

    WE PROPOSE TO DEVELOP A PORTABLE MONITORING SYSTEM CAPABLE OF DETECTING TRACE QUANTITIES OF RADIONUCLIDES IN SOILS USING A HIGH RESOLUTION CADMIUM TELLURIDE ARRAY DETECTOR AND A RUGGED MULTICHANNEL DATA LOGGER. THE PROPOSED MONITORING SYSTEM BUILDS UPON THE DESIGN OF A SIMPLE MONITOR DEVELOPED TO AID IN THE DECONTAMINATION AND DECOMMISSIONING OF A URANIUM PLANT. THE SIMPLE SYSTEM IMPROVED THE SPEE ...

    SBIR Phase II 1995 Nuclear Regulatory Commission
  3. A HIGH RESOLUTION CDTE ARRAY MONITORING SYSTEM FOR MONITORING CONTAMINATION IN SOILS

    SBC: Radiation Safety Engineering, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Nuclear Regulatory Commission
  4. AirQAST Portable Automated Air Quality Monitoring

    SBC: CREARE LLC            Topic: 18NCER2A

    Assessment of wild land fire smoke exposure is a genuine concern to fire managers, public health officials, air quality regulators, and the public. Exposure to vegetation fire smoke products poses acute and chronic health hazards to first line responders, firefighters, and to communities located downwind of their source. Current instrumentation capable of providing reliable air quality data is exp ...

    SBIR Phase I 2019 Environmental Protection Agency
  5. A Low Cost In-Situ Bimetallic Reduction Prototype System for the Treatment and Remediation of Chlorinated Solvent-Contaminated Waters

    SBC: ATS-MER, LLC            Topic: N/A

    N/A

    SBIR Phase I 1998 Environmental Protection Agency
  6. A Micro-Variable Circular Orifice (MVOC) Fuel Injector with Variable Spray Angles and Patterns for Reducting NOx Emissions from Diesel Engines

    SBC: Quantlogic Corporation            Topic: N/A

    Diesel engines are widely used due to their high fuel efficiency. However, conventional diesel engines have high NOx and soot emissions. Selective catalytic reduction (SCR) for NOx reduction is less accepted by the construction industry due to complexity and cost. In-cylinder NOx reduction is more desirable. When low temperature combustion and/or premixed charge compression ignition (PCCI) combus ...

    SBIR Phase I 2008 Environmental Protection Agency
  7. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: ATS-MER, LLC            Topic: N/A

    Titanium with its inherent lightweight, corrosion resistance and mechanical properties is a critical and strategic metal in civilian and defense aviation, oil extraction and processing, water purification, the general chemical industry, and would be in automotive transportation if it were more economical. The entire world¿s supply of titanium as a sponge has been produced by the Kroll process fo ...

    SBIR Phase II 2009 Environmental Protection Agency
  8. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: ATS-MER, LLC            Topic: N/A

    All titanium is produced by the Kroll process, which is a batch process for the magnesium (Mg) reduction of titanium tetrachloride (TiCl4). Separate operations are required to produce the toxic and very corrosive TiCl4, which must be stored and transported. Magnesium also is produced separately in liquid form via the electrolysis of magnesium chloride (MgCl2), which requires storage and transport ...

    SBIR Phase I 2008 Environmental Protection Agency
  9. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: Environmental Abrasives, LLC            Topic: 07NCERA1

    All titanium is produced by the Kroll process, which is a batch process for the magnesium (Mg) reduction of titanium tetrachloride (TiCl4). Separate operations are required to produce the toxic and very corrosive TiCl4, which must be stored and transported. Magnesium also is produced separately in liquid form via the electrolysis of magnesium chloride (MgCl2), which requires storage and transport ...

    SBIR Phase I 2008 Environmental Protection Agency
  10. A New Innovative Low Cost Manufacturing Process to Produce Titanium

    SBC: Environmental Abrasives, LLC            Topic: 08NCERP1

    Titanium with its inherent lightweight, corrosion resistance and mechanical properties is a critical and strategic metal in civilian and defense aviation, oil extraction and processing, water purification, the general chemical industry, and would be in automotive transportation if it were more economical. The entire world’s supply of titanium as a sponge has been produced by the Kroll process f ...

    SBIR Phase II 2009 Environmental Protection Agency
US Flag An Official Website of the United States Government